From: sashiko-bot@kernel.org
To: "Marc Kleine-Budde" <mkl@pengutronix.de>
Cc: linux-can@vger.kernel.org,
"Oliver Hartkopp" <socketcan@hartkopp.net>,
"Vincent Mailhol" <mailhol@kernel.org>,
"Oleksij Rempel" <o.rempel@pengutronix.de>
Subject: Re: [PATCH net-next 19/37] dt-bindings: can: renesas,rcar-canfd: Document RZ/G3L SoC
Date: Fri, 16 Oct 2026 01:54:03 +0000 [thread overview]
Message-ID: <sashiko-outbox-173581@kernel.org> (raw)
In-Reply-To: <20261015015336.816543-20-mkl@pengutronix.de>
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [Medium] dt-bindings: missing required resets and reset-names for RZ/G3L
- [Medium] dt-bindings: missing maxItems constraint for RZ/G3L interrupts
--
commit 58ac9c18cd2ddefc0f54df00f420c9a823c995ac
Author: Biju Das <biju.das.jz@bp.renesas.com>
dt-bindings: can: renesas,rcar-canfd: Document RZ/G3L SoC
Document the RZ/G3L (R9A08G046) SoC support. RZ/G3L has 11 interrupts and
3 CANFD channels compared to 8 interrupts and 2 CANFD channels on RZ/G3S.
RZ/G3L has 288 buffers in total compared to 192 buffers in RZ/G3S.
Link: https://patch.msgid.link/20261001075742.21961-2-biju.das.jz@bp.renesas.com
> diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
> index 1a7a9ce45e977..4b94bc8d911be 100644
> --- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
> +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
[ ... ]
> @@ -294,6 +295,25 @@ allOf:
> patternProperties:
> "^channel[6-7]$": false
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: renesas,r9a08g046-canfd
> + then:
> + properties:
> + interrupts:
> + minItems: 11
[Severity: Medium]
Does this block also need a maxItems constraint?
The top-level schema permits up to 20 interrupts by default. While this
block correctly specifies minItems: 11, it omits maxItems: 11.
Could a devicetree node providing between 12 and 20 interrupts silently
pass schema validation instead of being properly rejected?
> +
> + interrupt-names:
> + minItems: 11
> +
> + resets:
> + minItems: 2
[Severity: Medium]
Should the new compatible string be added to the shared required properties block?
This block indicates the hardware requires 2 resets. However, the new
compatible string was not added to the existing shared if-then block that
enforces resets and reset-names as required properties:
- if:
properties:
compatible:
contains:
enum:
- renesas,r9a08g045-canfd
- renesas,r9a09g047-canfd
- renesas,rzg2l-canfd
then:
required:
- resets
- reset-names
Could a devicetree node missing the mandatory resets and reset-names
properties for RZ/G3L silently pass schema validation, allowing incomplete
hardware descriptions?
> +
> + patternProperties:
> + "^channel[3-7]$": false
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261015015336.816543-1-mkl@pengutronix.de?part=19
next prev parent reply other threads:[~2026-10-16 1:54 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-15 1:39 [PATCH net-next 0/37] pull-request: can-next 2026-10-15 Marc Kleine-Budde
2026-10-15 1:39 ` [PATCH net-next 01/37] can: dev: can_dropped_invalid_skb: drop CAN XL frames on non-CAN XL devices Marc Kleine-Budde
2026-10-15 1:57 ` netdev-bot+sinfo
2026-10-16 8:25 ` Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 02/37] can: raw: remove redundant NULL check before netdev_hold() Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 03/37] can: replace ARPHRD_CAN type checks with can_get_ml_priv() Marc Kleine-Budde
2026-10-16 2:37 ` netdev-bot+sashiko
2026-10-16 8:42 ` Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 04/37] can: proc: reset pkg_stats atomics individually Marc Kleine-Budde
2026-10-16 1:54 ` sashiko-bot
2026-10-16 2:37 ` netdev-bot+sashiko
2026-10-15 1:40 ` [PATCH net-next 05/37] can: proc: remove pointers from CAN specific proc output Marc Kleine-Budde
2026-10-16 2:37 ` netdev-bot+sashiko
2026-10-15 1:40 ` [PATCH net-next 06/37] can: isotp: check the frame type, not just the length Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 07/37] can: isotp: fix filter removal race between release and netns change Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 08/37] can: bcm: " Marc Kleine-Budde
2026-10-16 2:37 ` netdev-bot+sashiko
2026-10-16 8:51 ` Oliver Hartkopp
2026-10-15 1:40 ` [PATCH net-next 09/37] can: raw: take rtnl_lock() before leaving the notifier list Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 10/37] can: skb: make echo skb freeing safe in any IRQ context Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 11/37] dt-bindings: can: renesas,rcar-canfd: Document RZ/G3S SoC Marc Kleine-Budde
2026-10-16 2:37 ` netdev-bot+sashiko
2026-10-15 1:40 ` [PATCH net-next 12/37] can: skb: make CAN skb allocation failure paths IRQ-safe Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 13/37] can: rcar_canfd: Fix typos in macro names Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 14/37] can: dev: can_put_echo_skb(): free skb on invalid echo index Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 15/37] can: rcar_canfd: Allow the CAN FD clock to be sourced from fck Marc Kleine-Budde
2026-10-16 1:54 ` sashiko-bot
2026-10-16 2:37 ` netdev-bot+sashiko
2026-10-15 1:40 ` [PATCH net-next 16/37] can: rcar_canfd: Do not set registers selecting the CAN mode Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 17/37] can: rcar_canfd: Add support for Renesas RZ/G3S Marc Kleine-Budde
2026-10-16 1:54 ` sashiko-bot
2026-10-16 2:37 ` netdev-bot+sashiko
2026-10-15 1:40 ` [PATCH net-next 18/37] dt-bindings: can: renesas,rcar-canfd: Restrict resets in top-level Marc Kleine-Budde
2026-10-16 2:37 ` netdev-bot+sashiko
2026-10-15 1:40 ` [PATCH net-next 19/37] dt-bindings: can: renesas,rcar-canfd: Document RZ/G3L SoC Marc Kleine-Budde
2026-10-16 1:54 ` sashiko-bot [this message]
2026-10-16 2:37 ` netdev-bot+sashiko
2026-10-15 1:40 ` [PATCH net-next 20/37] can: rcar_canfd: Derive max_channels from the device tree Marc Kleine-Budde
2026-10-16 2:37 ` netdev-bot+sashiko
2026-10-15 1:40 ` [PATCH net-next 21/37] dt-bindings: net: can: convert grcan to DT schema Marc Kleine-Budde
2026-10-16 2:37 ` netdev-bot+sashiko
2026-10-15 1:40 ` [PATCH net-next 22/37] can: rcar_canfd: Add support for Renesas RZ/G3L Marc Kleine-Budde
2026-10-16 2:37 ` netdev-bot+sashiko
2026-10-15 1:40 ` [PATCH net-next 23/37] can: grcan: update the binding file reference in the driver comment Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 24/37] can: remove Softing CANcard driver Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 25/37] can: Convert to DEFINE_SIMPLE_DEV_PM_OPS() Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 26/37] can: cc770: don't discard the IRQ lookup error in probe Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 27/37] can: cc770: fix the clock divider check on the platform bus Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 28/37] can: ems_usb: use usb_kill_urb() to stop the intr URB Marc Kleine-Budde
2026-10-16 2:37 ` netdev-bot+sashiko
2026-10-15 1:40 ` [PATCH net-next 29/37] can: esd: acc_start_xmit(): avoid use-after-free of skb after can_put_echo_skb() Marc Kleine-Budde
2026-10-16 1:54 ` sashiko-bot
2026-10-15 1:40 ` [PATCH net-next 30/37] can: flexcan: flexcan_setup_stop_mode_gpr: fix OF node reference leak Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 31/37] can: kvaser_usb: refactor endpoint lookup Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 32/37] can: kvaser_usb: validate command format before parsing in hydra receive path Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 33/37] can: kvaser_pciefd: fix use-after-free in bec poll timer Marc Kleine-Budde
2026-10-16 1:54 ` sashiko-bot
2026-10-15 1:40 ` [PATCH net-next 34/37] can: mcp251xfd: mcp251xfd_probe(): reject devices without match data Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 35/37] can: sun4i_can: sun4ican_probe(): fix clk leak Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 36/37] can: ucan: fix repeated word 'is' in comment Marc Kleine-Budde
2026-10-15 1:40 ` [PATCH net-next 37/37] can: xilinx_can: set CAN FD flags on received frames Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-173581@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=mailhol@kernel.org \
--cc=mkl@pengutronix.de \
--cc=o.rempel@pengutronix.de \
--cc=sashiko-reviews@lists.linux.dev \
--cc=socketcan@hartkopp.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox