From: sashiko-bot@kernel.org
To: "Marc Kleine-Budde" <mkl@pengutronix.de>
Cc: linux-can@vger.kernel.org,
"Oliver Hartkopp" <socketcan@hartkopp.net>,
"Vincent Mailhol" <mailhol@kernel.org>,
"Oleksij Rempel" <o.rempel@pengutronix.de>
Subject: Re: [PATCH net 07/11] can: isotp: reject socket options while a transfer is active
Date: Wed, 18 Nov 2026 22:10:17 +0000 [thread overview]
Message-ID: <sashiko-outbox-222095@kernel.org> (raw)
In-Reply-To: <20261117220818.1142581-8-mkl@pengutronix.de>
Thank you for your contribution! Sashiko AI review found 2 potential
issues to consider:
- [Medium] can: isotp: rxtimer left disarmed in isotp_rcv_cf() on
invalid cf->len
- [Medium] can: isotp: isotp_sendmsg() reads socket options outside
tx.state claim
--
commit 5df2197329153084f3880aee22e4689e00328a28
Author: Oliver Hartkopp <socketcan@hartkopp.net>
can: isotp: reject socket options while a transfer is active
This commit rejects setsockopt() calls with -EAGAIN in
isotp_setsockopt_locked() when so->tx.state or so->rx.state is not
ISOTP_IDLE, preventing socket options from changing while a transfer from a
previous binding is still draining.
Link: https://patch.msgid.link/20261117-can-bcmlock-memcg-v6-7-6826a6227d36@hartkopp.net
> diff --git a/net/can/isotp.c b/net/can/isotp.c
> index 0293d590186c4..32c88749d75e7 100644
> --- a/net/can/isotp.c
> +++ b/net/can/isotp.c
> @@ -1725,6 +1725,14 @@ static int isotp_setsockopt_locked(struct socket *sock, int optname,
> if (so->bound)
> return -EISCONN;
>
> + /* A transmission or reception that outlived a previous binding
> + * (unbound by NETDEV_UNREGISTER) may still be draining and uses the
> + * socket options, see isotp_bind().
> + */
> + if (READ_ONCE(so->tx.state) != ISOTP_IDLE ||
> + READ_ONCE(so->rx.state) != ISOTP_IDLE)
> + return -EAGAIN;
[Severity: Medium]
Can an invalid consecutive frame leave so->rx.state permanently in
ISOTP_WAIT_DATA with so->rxtimer disarmed, causing isotp_setsockopt_locked()
(and isotp_bind()) to always return -EAGAIN after an unbind?
isotp_rcv_cf() cancels so->rxtimer before checking cf->len against
so->rx.ll_dl, and returns early on a length mismatch without restarting
so->rxtimer or resetting so->rx.state to ISOTP_IDLE:
net/can/isotp.c:isotp_rcv_cf() {
...
hrtimer_cancel(&so->rxtimer);
/* isotp_rx_timer_handler() may have raced us for so->rx.state
* while hrtimer_cancel() above waited for it to finish => recheck
*/
if (READ_ONCE(so->rx.state) != ISOTP_WAIT_DATA)
return 1;
/* CFs are never longer than the FF */
if (cf->len > so->rx.ll_dl)
return 1;
/* CFs have usually the LL_DL length */
if (cf->len < so->rx.ll_dl) {
/* this is only allowed for the last CF */
if (so->rx.len - so->rx.idx > so->rx.ll_dl - ae - N_PCI_SZ)
return 1;
}
...
}
If a peer sends a First Frame followed by a Consecutive Frame with an
invalid length, so->rxtimer is disarmed while so->rx.state stays in
ISOTP_WAIT_DATA, so the reception never times out.
[Severity: Medium]
Does isotp_sendmsg() still read socket options outside the region where
so->tx.state is non-idle and so->bound is verified?
CPU0 CPU1
isotp_sendmsg()
ae = (so->opt.flags & ...)
wait_tx_done = (so->opt.flags & ...)
wait_event_interruptible(...)
isotp_notify(NETDEV_UNREGISTER)
so->bound = 0
/* previous tx finishes:
* so->tx.state = ISOTP_IDLE */
isotp_setsockopt_locked()
/* updates so->opt.flags */
isotp_bind()
so->bound = 1
WRITE_ONCE(so->tx.state, ISOTP_SENDING)
if (!READ_ONCE(so->bound)) ...
/* builds first frame with stale ae, while
* isotp_send_cframe() later reads new ae */
isotp_sendmsg() reads ae and wait_tx_done at function entry before claiming
so->tx.state = ISOTP_SENDING and rechecking so->bound. In addition, at the
end of isotp_sendmsg(), cf->flags = so->ll.tx_flags is read after publishing
WRITE_ONCE(so->tx.state, new_state), starting tx_hrt, and dropping
so->rx_lock, where an incoming FC abort or timeout can reset so->tx.state to
ISOTP_IDLE and allow a concurrent setsockopt(CAN_ISOTP_LL_OPTS) after unbind
to modify so->ll.tx_flags before cf->flags is assigned.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261117220818.1142581-1-mkl@pengutronix.de?part=7
next prev parent reply other threads:[~2026-11-18 22:10 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 22:03 [PATCH net 0/11] pull-request: can 2026-11-17 Marc Kleine-Budde
2026-11-17 22:03 ` [PATCH net 01/11] can: bcm: copy the CAN frames outside of lock_sock() Marc Kleine-Budde
2026-11-17 22:12 ` netdev-bot+sinfo
2026-11-18 7:47 ` Oliver Hartkopp
2026-11-17 22:03 ` [PATCH net 02/11] can: bcm: do not remove the procfs entry in bcm_notify() Marc Kleine-Budde
2026-11-17 22:03 ` [PATCH net 03/11] can: raw: use a private mutex instead of lock_sock() Marc Kleine-Budde
2026-11-17 22:03 ` [PATCH net 04/11] can: isotp: " Marc Kleine-Budde
2026-11-17 22:03 ` [PATCH net 05/11] can: bcm: " Marc Kleine-Budde
2026-11-17 22:03 ` [PATCH net 06/11] can: isotp: always start the rx timeout in ISOTP_WAIT_DATA state Marc Kleine-Budde
2026-11-18 22:10 ` sashiko-bot
2026-11-17 22:03 ` [PATCH net 07/11] can: isotp: reject socket options while a transfer is active Marc Kleine-Budde
2026-11-18 22:10 ` sashiko-bot [this message]
2026-11-17 22:03 ` [PATCH net 08/11] can: netlink: fix static FD-NON-ISO mode validation Marc Kleine-Budde
2026-11-17 22:03 ` [PATCH net 09/11] can: netlink: fix IFLA_CAN_BITRATE_MAX attribute sizing Marc Kleine-Budde
2026-11-17 22:03 ` [PATCH net 10/11] can: netlink: fix CAN XL PWM " Marc Kleine-Budde
2026-11-17 22:03 ` [PATCH net 11/11] can: gs_usb: gs_can_start_xmit(): don't leak uninitialized memory over USB Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-222095@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=mailhol@kernel.org \
--cc=mkl@pengutronix.de \
--cc=o.rempel@pengutronix.de \
--cc=sashiko-reviews@lists.linux.dev \
--cc=socketcan@hartkopp.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox