From: "Pali Rohár" <pali@kernel.org>
To: Steve French <sfrench@samba.org>,
Paulo Alcantara <pc@manguebit.org>,
Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: linux-cifs@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH RESEND 10/11] cifs: Add support for parsing WSL symlinks in version 1 format
Date: Mon, 6 Jul 2026 22:50:06 +0200 [thread overview]
Message-ID: <20260706205006.a4oczzxh4ythlty3@pali> (raw)
In-Reply-To: <20260706184819.22124-11-pali@kernel.org>
On Monday 06 July 2026 20:48:18 Pali Rohár wrote:
> - /* MS-FSCC 2.1.2.7 defines layout of the Target field only for Version 2. */
> u32 version = le32_to_cpu(buf->Version);
> + switch (version) {
> + case 1:
> + /*
> + * Layout version 1 stores the symlink target in the data section of
> + * the file encoded in UTF-8 without trailing null-term byte.
> + */
>
> - if (version != 2) {
> + oparms = CIFS_OPARMS(cifs_sb, tcon, full_path, FILE_READ_DATA,
> + FILE_OPEN, CREATE_NOT_DIR | OPEN_REPARSE_POINT,
> + ACL_NO_MODE);
> + oparms.fid = &fid;
> + oplock = tcon->ses->server->oplocks ? REQ_OPLOCK : 0;
> + rc = tcon->ses->server->ops->open(xid, &oparms, &oplock, NULL);
> + if (rc)
> + goto out;
> +
> + free_symname_utf8 = true;
> + symname_utf8_len = le64_to_cpu(data->fi.EndOfFile);
> + symname_utf8 = kmalloc(symname_utf8_len, GFP_KERNEL);
> + if (!symname_utf8) {
> + rc = -ENOMEM;
> + goto out;
> + }
Sashiko AI wrote:
https://sashiko.dev/#/patchset/20260706184819.22124-1-pali%40kernel.org
Does this leak the server-side file handle and oplock?
If this kmalloc() fails, the code jumps to the out label without calling
tcon->ses->server->ops->close(xid, tcon, &fid).
This is really a problem. I would suggest to move the kmalloc() block
above the tcon->ses->server->ops->open(...) block which should address
this issue. E.g.:
diff --git a/fs/smb/client/reparse.c b/fs/smb/client/reparse.c
index 3418e4b66022..3fe57d166776 100644
--- a/fs/smb/client/reparse.c
+++ b/fs/smb/client/reparse.c
@@ -1133,6 +1133,14 @@ static int parse_reparse_wsl_symlink(struct reparse_wsl_symlink_data_buffer *buf
* the file encoded in UTF-8 without trailing null-term byte.
*/
+ free_symname_utf8 = true;
+ symname_utf8_len = le64_to_cpu(data->fi.EndOfFile);
+ symname_utf8 = kmalloc(symname_utf8_len, GFP_KERNEL);
+ if (!symname_utf8) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
oparms = CIFS_OPARMS(cifs_sb, tcon, full_path, FILE_READ_DATA,
FILE_OPEN, CREATE_NOT_DIR | OPEN_REPARSE_POINT,
ACL_NO_MODE);
@@ -1142,14 +1150,6 @@ static int parse_reparse_wsl_symlink(struct reparse_wsl_symlink_data_buffer *buf
if (rc)
goto out;
- free_symname_utf8 = true;
- symname_utf8_len = le64_to_cpu(data->fi.EndOfFile);
- symname_utf8 = kmalloc(symname_utf8_len, GFP_KERNEL);
- if (!symname_utf8) {
- rc = -ENOMEM;
- goto out;
- }
-
buf_type = CIFS_NO_BUFFER;
io_parms = (struct cifs_io_parms) {
.netfid = fid.netfid,
next prev parent reply other threads:[~2026-07-06 20:50 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-06 18:48 [PATCH RESEND 00/11] cifs: Various changes Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 01/11] cifs: Fix and improve cifs_is_path_accessible() function Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 02/11] cifs: Remove code for querying FILE_INFO_STANDARD via CIFSSMBQPathInfo() Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 03/11] cifs: Remove CIFSSMBSetPathInfoFB() fallback function Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 04/11] cifs: Remove cifs_backup_query_path_info() and replace it by cifs_query_path_info() Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 05/11] cifs: Fix validation of EAs for WSL reparse points Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 06/11] cifs: Validate presence of EA $LXMOD " Pali Rohár
2026-07-06 22:30 ` Steve French
2026-07-06 22:39 ` Pali Rohár
2026-07-06 22:55 ` Steve French
2026-07-06 23:02 ` Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 07/11] cifs: Check if server supports EAs before trying to set it for WSL Pali Rohár
2026-07-06 22:33 ` Steve French
2026-07-06 22:42 ` Pali Rohár
[not found] ` <CAH2r5mvDGM7i8EsdPkW681a_AnXOAsHkg38eJqegO7g2gV8qAw@mail.gmail.com>
2026-07-06 22:58 ` Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 08/11] cifs: Extend ->set_EA() callback to allow operate on reparse point Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 09/11] cifs: Create native Window socket file compatible also with WSL subsystem Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 10/11] cifs: Add support for parsing WSL symlinks in version 1 format Pali Rohár
2026-07-06 20:50 ` Pali Rohár [this message]
2026-07-06 21:02 ` Pali Rohár
2026-07-06 18:48 ` [PATCH RESEND 11/11] cifs: Add support for creating " Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260706205006.a4oczzxh4ythlty3@pali \
--to=pali@kernel.org \
--cc=linux-cifs@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pc@manguebit.org \
--cc=ronniesahlberg@gmail.com \
--cc=sfrench@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox