From: Suresh Jayaraman <sjayaraman-l3A5Bk7waGM@public.gmane.org>
To: Steve French <smfrench-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-cifs <linux-cifs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Jeff Layton <jlayton-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Alexander Swen <alex-UE4+9DRHXtc@public.gmane.org>
Subject: [PATCH 1/3] cifs: add new module parameter 'enable_oplocks'
Date: Tue, 11 Oct 2011 21:28:00 +0530 [thread overview]
Message-ID: <4E946788.3060101@suse.de> (raw)
Thus spake Jeff Layton:
"Making that a module parm would allow you to set that parameter at boot
time without needing to add special startup scripts. IMO, all of the
procfile "switches" under /proc/fs/cifs should be module parms
instead."
This patch doesn't alter the default behavior (Oplocks are enabled by
default).
To disable oplocks when loading the module, use
modprobe cifs enable_oplocks=0
(any of '0' or 'n' or 'N' conventions can be used).
To disable oplocks at runtime using the new interface, use
echo 0 > /sys/module/cifs/parameters/enable_oplocks
The older /proc/fs/cifs/OplockEnabled interface will be deprecated
after two releases. A subsequent patch will add an warning message
about the deprecation.
Reported-by: Alexander Swen <alex-UE4+9DRHXtc@public.gmane.org>
Cc: Jeff Layton <jlayton-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Suresh Jayaraman <sjayaraman-l3A5Bk7waGM@public.gmane.org>
---
fs/cifs/cifsfs.c | 5 +++++
fs/cifs/cifsglob.h | 3 +++
fs/cifs/dir.c | 2 +-
fs/cifs/file.c | 4 ++--
4 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 3e29899..675ab40 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -81,6 +81,11 @@ module_param(echo_retries, ushort, 0644);
MODULE_PARM_DESC(echo_retries, "Number of echo attempts before giving up and "
"reconnecting server. Default: 5. 0 means "
"never reconnect.");
+unsigned int enable_oplocks = 1;
+module_param(enable_oplocks, bool, 0644);
+MODULE_PARM_DESC(enable_oplocks, "Enable or disable oplocks (bool). Default:"
+ "y/Y/1");
+
extern mempool_t *cifs_sm_req_poolp;
extern mempool_t *cifs_req_poolp;
extern mempool_t *cifs_mid_poolp;
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 6255fa8..b3e229c 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -936,6 +936,9 @@ GLOBAL_EXTERN unsigned int cifs_max_pending; /* MAX requests at once to server*/
/* reconnect after this many failed echo attempts */
GLOBAL_EXTERN unsigned short echo_retries;
+/* enable or disable oplocks */
+GLOBAL_EXTERN unsigned int enable_oplocks;
+
GLOBAL_EXTERN struct rb_root uidtree;
GLOBAL_EXTERN struct rb_root gidtree;
GLOBAL_EXTERN spinlock_t siduidlock;
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 81914df..6529b69 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -165,7 +165,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
}
tcon = tlink_tcon(tlink);
- if (oplockEnabled)
+ if (oplockEnabled || enable_oplocks)
oplock = REQ_OPLOCK;
if (nd && (nd->flags & LOOKUP_OPEN))
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index bb71471..b76c31d 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -369,7 +369,7 @@ int cifs_open(struct inode *inode, struct file *file)
cFYI(1, "inode = 0x%p file flags are 0x%x for %s",
inode, file->f_flags, full_path);
- if (oplockEnabled)
+ if (oplockEnabled || enable_oplocks)
oplock = REQ_OPLOCK;
else
oplock = 0;
@@ -493,7 +493,7 @@ static int cifs_reopen_file(struct cifsFileInfo *pCifsFile, bool can_flush)
cFYI(1, "inode = 0x%p file flags 0x%x for %s",
inode, pCifsFile->f_flags, full_path);
- if (oplockEnabled)
+ if (oplockEnabled || enable_oplocks)
oplock = REQ_OPLOCK;
else
oplock = 0;
next reply other threads:[~2011-10-11 15:58 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-11 15:58 Suresh Jayaraman [this message]
[not found] ` <4E946788.3060101-l3A5Bk7waGM@public.gmane.org>
2011-10-11 16:44 ` [PATCH 1/3] cifs: add new module parameter 'enable_oplocks' Jeff Layton
[not found] ` <20111011124405.37e09487-4QP7MXygkU+dMjc06nkz3ljfA9RmPOcC@public.gmane.org>
2011-10-11 18:50 ` Steve French
[not found] ` <CAH2r5mv=SruLndtjRjPkpF27n5ekokk7SwMgY+4eOpehbJBpHg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-10-12 5:21 ` Suresh Jayaraman
2011-10-12 5:59 ` Suresh Jayaraman
[not found] ` <4E952CBD.2010906-l3A5Bk7waGM@public.gmane.org>
2011-10-12 11:28 ` Jeff Layton
2011-10-11 17:31 ` Steve French
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E946788.3060101@suse.de \
--to=sjayaraman-l3a5bk7wagm@public.gmane.org \
--cc=alex-UE4+9DRHXtc@public.gmane.org \
--cc=jlayton-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-cifs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=smfrench-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox