CIFS mount twice

CIFS mount twice

[Aravind M D]

Hi,

  I have some cifs mount points configured on my /etc/fstab.

  When i am doing mount -a command mount points are mouting again.

  If mount command is issued mount point is showing twice.

  If i use mount through command line also i am facing the same issue.

  Please help me.

  Rgds,
  Aravind M D

Re: CIFS mount twice

[Aravind M D]

Aravind M D <aravind@...> writes:

 
> 
> Hi,
> 
>   I have some cifs mount points configured on my /etc/fstab.
> 
>   When i am doing mount -a command mount points are mouting again.
> 
>   If mount command is issued mount point is showing twice.
> 
>   If i use mount through command line also i am facing the same issue.
> 
>   Please help me.
> 
>   Rgds,
>   Aravind M D
> 

Can someone help me with the below issue.

Thanks in Advance

- Aravind 

Re: CIFS mount twice

[Jeff Layton]

On Tue, 15 Nov 2011 06:07:39 +0000 (UTC)
Aravind M D <aravind-f8yKZFm1E5Q@public.gmane.org> wrote:

> Aravind M D <aravind@...> writes:
> 
>  
> > 
> > Hi,
> > 
> >   I have some cifs mount points configured on my /etc/fstab.
> > 
> >   When i am doing mount -a command mount points are mouting again.
> > 
> >   If mount command is issued mount point is showing twice.
> > 
> >   If i use mount through command line also i am facing the same issue.
> > 
> >   Please help me.
> > 
> >   Rgds,
> >   Aravind M D
> > 
> 
> Can someone help me with the below issue.
> 
> Thanks in Advance
> 

Not with the description you've given as there's just hardly anything
there in the way of details...

I set up my fedora rawhide test box with a cifs mount in /etc/fstab and
then ran mount -a several times. It was only mounted once.

IIUC, it's the job of /bin/mount to only attempt to mount filesystems
that have not already been mounted when mount -a is run. If that's not
happening on your machine then it sounds like something is broken there.

-- 
Jeff Layton <jlayton-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org>

Re: CIFS mount twice

[Aravind M D]

Quoting Jeff Layton <jlayton-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org>:

> On Tue, 15 Nov 2011 06:07:39 +0000 (UTC)
> Aravind M D <aravind-f8yKZFm1E5Q@public.gmane.org> wrote:
>
>> Aravind M D <aravind@...> writes:
>>
>>
>> >
>> > Hi,
>> >
>> >   I have some cifs mount points configured on my /etc/fstab.
>> >
>> >   When i am doing mount -a command mount points are mouting again.
>> >
>> >   If mount command is issued mount point is showing twice.
>> >
>> >   If i use mount through command line also i am facing the same issue.
>> >
>> >   Please help me.
>> >
>> >   Rgds,
>> >   Aravind M D
>> >
>>
>> Can someone help me with the below issue.
>>
>> Thanks in Advance
>>
>
> Not with the description you've given as there's just hardly anything
> there in the way of details...
>
> I set up my fedora rawhide test box with a cifs mount in /etc/fstab and
> then ran mount -a several times. It was only mounted once.
>
> IIUC, it's the job of /bin/mount to only attempt to mount filesystems
> that have not already been mounted when mount -a is run. If that's not
> happening on your machine then it sounds like something is broken there.
>
> --
> Jeff Layton <jlayton-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org>

Hi Jeff,

I have SLES 11 SAP systems on which some CIFS FS are configured on /etc/fstab.

~#cat /etc/fstab
//oese-sc1-osi01/osiris1       /oese-sc1-osi01/osiris1/
cifs                  username=user1,password=pass1,uid=200,gid=200
//oese-sc1-osi02/osiris2       /oese-sc1-osi02/osiris2/
cifs                  username=user1,password=pass1,uid=200,gid=200
//oese-sc1-osi99/osiris0       /oese-sc1-osi99/osiris0/
cifs                  username=user1,password=pass1,uid=200,gid=200

Already these FS are mounted on my system. When i run mount -a and mount
command below is the output.

~#mount

//oese-sc1-osi01/osiris1 on /oese-sc1-osi01/osiris1 type cifs (rw,mand)
//oese-sc1-osi02/osiris2 on /oese-sc1-osi02/osiris2 type cifs (rw,mand)
//oese-sc1-osi99/osiris0 on /oese-sc1-osi99/osiris0 type cifs (rw,mand)
//oese-sc1-osi01/osiris1 on /oese-sc1-osi01/osiris1 type cifs (rw,mand)
//oese-sc1-osi02/osiris2 on /oese-sc1-osi02/osiris2 type cifs (rw,mand)
//oese-sc1-osi99/osiris0 on /oese-sc1-osi99/osiris0 type cifs (rw,mand)

Mounts are showing twice.

I have tested the same on Debian 6 also i have faced same problem. But in
the debian 6 i tried upgrading the cifs-utils to the latest version.

Once cifs-utils was upgraded the mount -a will mount partition only once.

But when i mount the same FS using command line in debian it will show twice.

Why CIFS FS is mounting on already mounted mount points.

-  Aravin

Re: CIFS mount twice

[Steve French]

On Tue, Nov 15, 2011 at 6:26 AM, Aravind M D <aravind-f8yKZFm1E5Q@public.gmane.org> wrote:
> Once cifs-utils was upgraded the mount -a will mount partition only once.
>
> But when i mount the same FS using command line in debian it will show twice.
>
> Why CIFS FS is mounting on already mounted mount points.

I tried a few experiments here, and although I get different errors
with /sbin/mount.cifs present vs. without, I don't see the problem
you a describing.   First obvious question ... what version of
cifs-utils are you using.   Type "/sbin/mount.cifs -V" to
see if you are using the roughly the same version on all.


--
Thanks,

Steve

Re: CIFS mount twice

[Aravind M D]

Quoting Steve French <smfrench-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>:

> On Tue, Nov 15, 2011 at 6:26 AM, Aravind M D <aravind-f8yKZFm1E5Q@public.gmane.org> wrote:
>> Once cifs-utils was upgraded the mount -a will mount partition only once.
>>
>> But when i mount the same FS using command line in debian it will  
>> show twice.
>>
>> Why CIFS FS is mounting on already mounted mount points.
>
> I tried a few experiments here, and although I get different errors
> with /sbin/mount.cifs present vs. without, I don't see the problem
> you a describing.   First obvious question ... what version of
> cifs-utils are you using.   Type "/sbin/mount.cifs -V" to
> see if you are using the roughly the same version on all.
>
>
> --
> Thanks,
>
> Steve

Hi Steve,

Please find the details of  cifs-utils i am using.

Debian
------------

root@ser1:~# cat /etc/debian_version
6.0
root@ser1:~# mount.cifs -V
mount.cifs version: 4.5

SLES
------------

ser2:~ # cat /etc/SuSE-release
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 1

ser2:~ # mount.cifs -V
mount.cifs version: 1.12-3.4.3-1.17.2-2359-SUSE-CODE11

- Aravind

Re: CIFS mount twice

[Suresh Jayaraman]

On 11/15/2011 05:56 PM, Aravind M D wrote:
> Quoting Jeff Layton <jlayton-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org>:
> 
>> On Tue, 15 Nov 2011 06:07:39 +0000 (UTC)
>> Aravind M D <aravind-f8yKZFm1E5Q@public.gmane.org> wrote:
>>
>>> Aravind M D <aravind@...> writes:
>>>
>>>
>>> >
>>> > Hi,
>>> >
>>> >   I have some cifs mount points configured on my /etc/fstab.
>>> >
>>> >   When i am doing mount -a command mount points are mouting again.
>>> >
>>> >   If mount command is issued mount point is showing twice.
>>> >
>>> >   If i use mount through command line also i am facing the same issue.
>>> >
>>> >   Please help me.
>>> >
>>> >   Rgds,
>>> >   Aravind M D
>>> >
>>>
>>> Can someone help me with the below issue.
>>>
>>> Thanks in Advance
>>>
>>
>> Not with the description you've given as there's just hardly anything
>> there in the way of details...
>>
>> I set up my fedora rawhide test box with a cifs mount in /etc/fstab and
>> then ran mount -a several times. It was only mounted once.
>>
>> IIUC, it's the job of /bin/mount to only attempt to mount filesystems
>> that have not already been mounted when mount -a is run. If that's not
>> happening on your machine then it sounds like something is broken there.
>>
>> -- 
>> Jeff Layton <jlayton-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org>
> 
> Hi Jeff,
> 
> I have SLES 11 SAP systems on which some CIFS FS are configured on
> /etc/fstab.
> 
> ~#cat /etc/fstab
> //oese-sc1-osi01/osiris1       /oese-sc1-osi01/osiris1/
> cifs                  username=user1,password=pass1,uid=200,gid=200
> //oese-sc1-osi02/osiris2       /oese-sc1-osi02/osiris2/
> cifs                  username=user1,password=pass1,uid=200,gid=200
> //oese-sc1-osi99/osiris0       /oese-sc1-osi99/osiris0/
> cifs                  username=user1,password=pass1,uid=200,gid=200
> 
> Already these FS are mounted on my system. When i run mount -a and mount
> command below is the output.
> 
> ~#mount
> 
> //oese-sc1-osi01/osiris1 on /oese-sc1-osi01/osiris1 type cifs (rw,mand)
> //oese-sc1-osi02/osiris2 on /oese-sc1-osi02/osiris2 type cifs (rw,mand)
> //oese-sc1-osi99/osiris0 on /oese-sc1-osi99/osiris0 type cifs (rw,mand)
> //oese-sc1-osi01/osiris1 on /oese-sc1-osi01/osiris1 type cifs (rw,mand)
> //oese-sc1-osi02/osiris2 on /oese-sc1-osi02/osiris2 type cifs (rw,mand)
> //oese-sc1-osi99/osiris0 on /oese-sc1-osi99/osiris0 type cifs (rw,mand)
> 
> Mounts are showing twice.
> 
> I have tested the same on Debian 6 also i have faced same problem. But in
> the debian 6 i tried upgrading the cifs-utils to the latest version.
> 
> Once cifs-utils was upgraded the mount -a will mount partition only once.
> 

Looks like you are hitting problems with older version of cifs-utils.

I ran the "mount -a" tests on openSUSE 11.4 and SLES11 SP1 but I could
reproduce this problem. I don't have a SLES11 setup. I'll see if I could
get one. Some useful information that'll help include

a) version of cifs-utils/cifs-mount
b) version of util-linux
c) mount -a -vvv output


OTOH, if you have a support contract with SUSE/Novell, please open a bug
report on https://bugzilla.novell.com agaist the product and include me
in the Cc.



Thanks
Suresh

Re: CIFS mount twice

[Aravind M D]

Quoting Suresh Jayaraman <sjayaraman-IBi9RG/b67k@public.gmane.org>:
>> On 11/15/2011 05:56 PM, Aravind M D wrote:
>   >> Quoting Jeff Layton <jlayton-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org>:
>   >>
>   >>> On Tue, 15 Nov 2011 06:07:39 +0000 (UTC)
>   >>> Aravind M D <aravind-f8yKZFm1E5Q@public.gmane.org> wrote:
>   >>>
>   >>>> Aravind M D <aravind@...> writes:
>   >>>>
>   >>>>
>   >>>> >
>   >>>> > Hi,
>   >>>> >
>   >>>> >   I have some cifs mount points configured on my /etc/fstab.
>   >>>> >
>   >>>> >   When i am doing mount -a command mount points are mouting again.
>   >>>> >
>   >>>> >   If mount command is issued mount point is showing twice.
>   >>>> >
>   >>>> >   If i use mount through command line also i am facing the  
> same issue.
>   >>>> >
>   >>>> >   Please help me.
>   >>>> >
>   >>>> >   Rgds,
>   >>>> >   Aravind M D
>   >>>> >
>   >>>>
>   >>>> Can someone help me with the below issue.
>   >>>>
>   >>>> Thanks in Advance
>   >>>>
>   >>>
>   >>> Not with the description you've given as there's just hardly anything
>   >>> there in the way of details...
>   >>>
>   >>> I set up my fedora rawhide test box with a cifs mount in /etc/fstab and
>   >>> then ran mount -a several times. It was only mounted once.
>   >>>
>   >>> IIUC, it's the job of /bin/mount to only attempt to mount filesystems
>   >>> that have not already been mounted when mount -a is run. If that's not
>   >>> happening on your machine then it sounds like something is  
> broken there.
>   >>>
>   >>> --
>   >>> Jeff Layton <jlayton-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org>
>   >>
>   >> Hi Jeff,
>   >>
>   >> I have SLES 11 SAP systems on which some CIFS FS are configured on
>   >> /etc/fstab.
>   >>
>   >> ~#cat /etc/fstab
>   >> //oese-sc1-osi01/osiris1       /oese-sc1-osi01/osiris1/
>   >> cifs                  username=user1,password=pass1,uid=200,gid=200
>   >> //oese-sc1-osi02/osiris2       /oese-sc1-osi02/osiris2/
>   >> cifs                  username=user1,password=pass1,uid=200,gid=200
>   >> //oese-sc1-osi99/osiris0       /oese-sc1-osi99/osiris0/
>   >> cifs                  username=user1,password=pass1,uid=200,gid=200
>   >>
>   >> Already these FS are mounted on my system. When i run mount -a and mount
>   >> command below is the output.
>   >>
>   >> ~#mount
>   >>
>   >> //oese-sc1-osi01/osiris1 on /oese-sc1-osi01/osiris1 type cifs (rw,mand)
>   >> //oese-sc1-osi02/osiris2 on /oese-sc1-osi02/osiris2 type cifs (rw,mand)
>   >> //oese-sc1-osi99/osiris0 on /oese-sc1-osi99/osiris0 type cifs (rw,mand)
>   >> //oese-sc1-osi01/osiris1 on /oese-sc1-osi01/osiris1 type cifs (rw,mand)
>   >> //oese-sc1-osi02/osiris2 on /oese-sc1-osi02/osiris2 type cifs (rw,mand)
>   >> //oese-sc1-osi99/osiris0 on /oese-sc1-osi99/osiris0 type cifs (rw,mand)
>   >>
>   >> Mounts are showing twice.
>   >>
>   >> I have tested the same on Debian 6 also i have faced same  
> problem. But in
>   >> the debian 6 i tried upgrading the cifs-utils to the latest version.
>   >>
>   >> Once cifs-utils was upgraded the mount -a will mount partition  
> only once.
>   >>
>   >
>   > Looks like you are hitting problems with older version of cifs-utils.
>   >
>   > I ran the "mount -a" tests on openSUSE 11.4 and SLES11 SP1 but I could
>   > reproduce this problem. I don't have a SLES11 setup. I'll see if I could
>   > get one. Some useful information that'll help include
>   >
>   > a) version of cifs-utils/cifs-mount
>   > b) version of util-linux
>   > c) mount -a -vvv output
>   >
>   >
>   > OTOH, if you have a support contract with SUSE/Novell, please open a bug
>   > report on https://bugzilla.novell.com agaist the product and include me
>   > in the Cc.
>   >
>   >
>   >
>   > Thanks
>   > Suresh

Hi Suresh,

Please find the details of CIFS configuration i am using.

Debian
------------

root@ser1[1]:~# cat /etc/debian_version
6.0
root@ser1[1]:~# mount.cifs -V
mount.cifs version: 4.5

root@ser1[1]:~# dpkg -l | grep util-linux
ii  util-linux                           2.17.2-9                       
  Miscellaneous system utilities

mount -a -vvv output for debian is on the below link

http://pastebin.com/E0a4NW46

SLES
------------

ser2:~ # cat /etc/SuSE-release
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 1

ser2:~ # mount.cifs -V
mount.cifs version: 1.12-3.4.3-1.17.2-2359-SUSE-CODE11

ser2:~ # rpm -qa | grep util-linux
util-linux-lang-2.16-6.8.2
util-linux-2.16-6.8.2

mount -a -vvv output for SLES is on the below link

http://pastebin.com/uWaYSqqD


- Aravind



Links:
------
[1] #

Re: CIFS mount twice

[Suresh Jayaraman]

On 11/16/2011 11:09 AM, Aravind M D wrote:
> Quoting Suresh Jayaraman <sjayaraman-IBi9RG/b67k@public.gmane.org>:
>>> On 11/15/2011 05:56 PM, Aravind M D wrote:
>>   >> Quoting Jeff Layton <jlayton-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org>:
>>   >>
>>   >>> On Tue, 15 Nov 2011 06:07:39 +0000 (UTC)
>>   >>> Aravind M D <aravind-f8yKZFm1E5Q@public.gmane.org> wrote:
>>   >>>
>>   >>>> Aravind M D <aravind@...> writes:
>>   >>>>
>>   >>>>
>>   >>>> >
>>   >>>> > Hi,
>>   >>>> >
>>   >>>> >   I have some cifs mount points configured on my /etc/fstab.
>>   >>>> >
>>   >>>> >   When i am doing mount -a command mount points are mouting
>> again.
>>   >>>> >
> 
> ser2:~ # cat /etc/SuSE-release
> SUSE Linux Enterprise Server 11 (x86_64)
> VERSION = 11
> PATCHLEVEL = 1
> 
> ser2:~ # mount.cifs -V
> mount.cifs version: 1.12-3.4.3-1.17.2-2359-SUSE-CODE11
> 

You might have to use "rpm -qa | grep cifs-mount" to find the version.

Also try upgrading cifs-mount package. "mount -a" mounting cifs mounts
twice atleast  is not reproducible with the recent updates.


-Suresh