From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <anholt@eliezer.anholt.net>
From: Eric Anholt <eric@anholt.net>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-rpi-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Stephen Warren <swarren@wwwdotorg.org>,
	Lee Jones <lee@kernel.org>,
	linux-clk@vger.kernel.org,
	Stephen Boyd <sboyd@codeaurora.org>,
	Mike Turquette <mturquette@linaro.org>,
	Eric Anholt <eric@anholt.net>
Subject: [PATCH v4 8/8] ARM: bcm2835: Use the firmware on rpi to get the EMMC clock.
Date: Mon, 20 Jul 2015 12:33:07 -0700
Message-Id: <1437420787-32137-9-git-send-email-eric@anholt.net>
In-Reply-To: <1437420787-32137-1-git-send-email-eric@anholt.net>
References: <1437420787-32137-1-git-send-email-eric@anholt.net>
List-ID: <linux-clk.vger.kernel.org>

This updates the MMC frequency from 100Mhz to 250Mhz.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 arch/arm/boot/dts/bcm2835-rpi.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 0a32123..5d370cb 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -62,6 +62,7 @@
 &sdhci {
 	status = "okay";
 	bus-width = <4>;
+	clocks = <&firmware_clocks RPI_CLOCK_EMMC>;
 };
 
 &uart0 {
-- 
2.1.4