From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Maxime Ripard To: Mike Turquette , Stephen Boyd Subject: [PATCH 5/7] ARM: sun8i: Add clock indices Date: Sun, 26 Jul 2015 23:14:28 +0200 Message-Id: <1437945270-32014-6-git-send-email-maxime.ripard@free-electrons.com> In-Reply-To: <1437945270-32014-1-git-send-email-maxime.ripard@free-electrons.com> References: <1437945270-32014-1-git-send-email-maxime.ripard@free-electrons.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Maxime Ripard , Chen-Yu Tsai , linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+mturquette=linaro.org@lists.infradead.org List-ID: The A23 and A33 gates have a non continuous set of clock IDs that are valid. Add the clock-indices property to the DT to express this. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 7abd0ae3143d..c318c770b6c1 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -180,6 +180,15 @@ compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb1>; + clock-indices = <1>, <6>, + <8>, <9>, <10>, + <13>, <14>, + <19>, <20>, + <21>, <24>, <26>, + <29>, <32>, <36>, + <40>, <44>, <46>, + <52>, <54>, + <57>; clock-output-names = "ahb1_mipidsi", "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", "ahb1_nand", "ahb1_sdram", @@ -196,6 +205,8 @@ compatible = "allwinner,sun8i-a23-apb1-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb1>; + clock-indices = <0>, <5>, + <12>, <13>; clock-output-names = "apb1_codec", "apb1_pio", "apb1_daudio0", "apb1_daudio1"; }; @@ -213,6 +224,10 @@ compatible = "allwinner,sun8i-a23-apb2-gates-clk"; reg = <0x01c2006c 0x4>; clocks = <&apb2>; + clock-indices = <0>, <1>, + <2>, <16>, + <17>, <18>, + <19>, <20>; clock-output-names = "apb2_i2c0", "apb2_i2c1", "apb2_i2c2", "apb2_uart0", "apb2_uart1", "apb2_uart2", -- 2.4.6 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel