[PATCH v2 2/7] dt-bindings: Amlogic: Document the CPU reset controller for Meson8b

[Carlo Caione <carlo@caione.org>]

From: Carlo Caione <carlo@endlessm.com>

The clock controller on Amlogic Meson8b SoCs has been extended with a
reset controller used to reset the CPU cores. It is used during SMP
bringup.

With this patch we extend the clock controller documentation.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
 Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
index 2b7b3fa..feeb4de 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
@@ -1,7 +1,8 @@
 * Amlogic Meson8b Clock and Reset Unit
 
 The Amlogic Meson8b clock controller generates and supplies clock to various
-controllers within the SoC.
+controllers within the SoC and also implements a reset controller for the CPU
+cores.
 
 Required Properties:
 
@@ -13,16 +14,19 @@ Required Properties:
 	   mapped region.
 
 - #clock-cells: should be 1.
+- #reset-cells: should be 1.
 
 Each clock is assigned an identifier and client nodes can use this identifier
 to specify the clock which they consume. All available clocks are defined as
 preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
 used in device tree sources.
+Similar identifiers exist for the CPU core reset lines.
 
 Example: Clock controller node:
 
 	clkc: clock-controller@c1104000 {
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 		compatible = "amlogic,meson8b-clkc";
 		reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
 	};
-- 
2.5.0