[PATCH 01/14] clk: twl6040: Correct clk_ops

Peter Ujfalusi
2016-05-18T13:46:23Z

Since the drover only supports prepare callbacks, the use of is_enabled is
not correct, it should be handling is_prepared.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
drivers/clk/clk-twl6040.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk-twl6040.c b/drivers/clk/clk-twl6040.c
index 697c66757400..e167e0bbaff5 100644
--- a/drivers/clk/clk-twl6040.c
+++ b/drivers/clk/clk-twl6040.c
@@ -34,7 +34,7 @@ struct twl6040_clk {
int enabled;
};

-static int twl6040_bitclk_is_enabled(struct clk_hw *hw)
+static int twl6040_bitclk_is_prepared(struct clk_hw *hw)
{
struct twl6040_clk *twl6040_clk = container_of(hw, struct twl6040_clk,
mcpdm_fclk);
@@ -66,7 +66,7 @@ static void twl6040_bitclk_unprepare(struct clk_hw *hw)
}

static const struct clk_ops twl6040_mcpdm_ops = {
- .is_enabled = twl6040_bitclk_is_enabled,
+ .is_prepared = twl6040_bitclk_is_prepared,
.prepare = twl6040_bitclk_prepare,
.unprepare = twl6040_bitclk_unprepare,
};
--
2.8.2