[PATCH v2 0/3] clk: Add Meson GXBB Always-On Reset + Clocks

Neil Armstrong
2016-08-18T10:08:45Z

The Amlogic Meson GXBB SoC has an Always-On part that contains pairs on
clocks and reset controls in a single memory mapped control register.
Add a separate clocks and reset node with the corresponding driver
exporting clock nodes and a reset controller.

Changes since v1 at http://lkml.kernel.org/r/1470734008-18849-1-git-send-email-narmstrong@baylibre.com :
- Make non-modular
- Remove clk.h and include init.h instead of module.h
- Use devm_ioremap_resource instead of of_iomap
- Rename driver spinlock

Neil Armstrong (3):
clk: meson: Add GXBB AO Clock and Reset controller driver
dt-bindings: clock: reset: Add GXBB AO Clock and Reset Bindings
ARM64: dts: meson-gxbb: Add GXBB AO Clock and Reset node

.../bindings/clock/amlogic,gxbb-aoclkc.txt | 45 +++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 9 +
drivers/clk/meson/Makefile | 2 +-
drivers/clk/meson/gxbb-aoclk.c | 192 +++++++++++++++++++++
include/dt-bindings/clock/gxbb-aoclkc.h | 66 +++++++
include/dt-bindings/reset/gxbb-aoclkc.h | 66 +++++++
6 files changed, 379 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt
create mode 100644 drivers/clk/meson/gxbb-aoclk.c
create mode 100644 include/dt-bindings/clock/gxbb-aoclkc.h
create mode 100644 include/dt-bindings/reset/gxbb-aoclkc.h

--
2.7.0