From: Mars Cheng <mars.cheng@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: CC Hwang <cc.hwang@mediatek.com>,
Loda Chou <loda.chou@mediatek.com>,
Miles Chen <miles.chen@mediatek.com>,
Jades Shih <jades.shih@mediatek.com>,
Yingjoe Chen <yingjoe.chen@mediatek.com>,
My Chuang <my.chuang@mediatek.com>,
<linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<devicetree@vger.kernel.org>, <wsd_upstream@mediatek.com>,
Marc Zyngier <marc.zyngier@arm.com>,
Thomas Gleixner <tglx@linutronix.de>,
Will Deacon <will.deacon@arm.com>,
Stephen Boyd <sboyd@codeaurora.org>, <linux-clk@vger.kernel.org>,
Chieh-Jay Liu <Chieh-Jay.Liu@mediatek.com>,
Mars Cheng <mars.cheng@mediatek.com>
Subject: [PATCH v2 04/10] arm64: dts: mediatek: add mt6797 support
Date: Mon, 6 Feb 2017 20:15:30 +0800 [thread overview]
Message-ID: <1486383336-16892-5-git-send-email-mars.cheng@mediatek.com> (raw)
In-Reply-To: <1486383336-16892-1-git-send-email-mars.cheng@mediatek.com>
This adds basic chip support for MT6797 SoC.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt6797-evb.dts | 36 ++++++
arch/arm64/boot/dts/mediatek/mt6797.dtsi | 187 +++++++++++++++++++++++++++
3 files changed, 224 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt6797-evb.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt6797.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 9fbfd32..015eb07 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -1,5 +1,6 @@
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
always := $(dtb-y)
diff --git a/arch/arm64/boot/dts/mediatek/mt6797-evb.dts b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
new file mode 100644
index 0000000..c79109c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6797.dtsi"
+
+/ {
+ model = "MediaTek MT6797 Evaluation Board";
+ compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x1e800000>;
+ };
+
+ chosen {};
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
new file mode 100644
index 0000000..da3a6ff
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -0,0 +1,187 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "mediatek,mt6797";
+ interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x001>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x002>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x003>;
+ };
+
+ cpu4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x100>;
+ };
+
+ cpu5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x101>;
+ };
+
+ cpu6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x102>;
+ };
+
+ cpu7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x103>;
+ };
+
+ cpu8: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ enable-method = "psci";
+ reg = <0x200>;
+ };
+
+ cpu9: cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ enable-method = "psci";
+ reg = <0x201>;
+ };
+ };
+
+ clk26m: oscillator@0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ clk32k: oscillator@1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32000>;
+ clock-output-names = "clk32k";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(10) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(10) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(10) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(10) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ sysirq: intpol-controller@10200620 {
+ compatible = "mediatek,mt6797-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #intpol-bases = <2>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10220620 0 0x20>,
+ <0 0x10220690 0 0x10>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt6797-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>;
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt6797-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>;
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt6797-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>;
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt6797-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@19000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ reg = <0 0x19000000 0 0x10000>, /* GICD */
+ <0 0x19200000 0 0x200000>, /* GICR */
+ <0 0x10240000 0 0x2000>; /* GICC */
+ };
+};
--
1.7.9.5
next prev parent reply other threads:[~2017-02-06 12:15 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-06 12:15 [PATCH v2 00/10] Add Basic SoC support for MT6797 Mars Cheng
2017-02-06 12:15 ` [PATCH v2 01/10] Document: DT: mediatek: multiple base address support for sysirq Mars Cheng
2017-02-08 23:20 ` Rob Herring
2017-02-09 1:47 ` Mars Cheng
2017-02-06 12:15 ` [PATCH v2 02/10] irqchip: mtk-sysirq: extend intpol base to arbitrary number Mars Cheng
2017-02-09 9:03 ` Marc Zyngier
2017-02-09 9:31 ` Mars Cheng
2017-02-09 9:43 ` Marc Zyngier
2017-02-09 9:49 ` Mars Cheng
2017-02-06 12:15 ` [PATCH v2 03/10] Document: DT: Add bindings for mediatek MT6797 SoC Platform Mars Cheng
2017-02-09 0:34 ` Rob Herring
2017-02-06 12:15 ` Mars Cheng [this message]
2017-02-06 12:28 ` [PATCH v2 04/10] arm64: dts: mediatek: add mt6797 support Marc Zyngier
2017-02-06 12:37 ` Mars Cheng
2017-02-06 12:15 ` [PATCH v2 05/10] dt-bindings: arm: mediatek: document clk bindings for MT6797 Mars Cheng
2017-02-09 0:35 ` Rob Herring
2017-02-06 12:15 ` [PATCH v2 06/10] clk: mediatek: add clk support " Mars Cheng
2017-02-11 23:31 ` Matthias Brugger
2017-02-06 12:15 ` [PATCH v2 07/10] soc: mediatek: refine scysys for mediatek platforms Mars Cheng
2017-02-11 23:15 ` Matthias Brugger
2017-02-06 12:15 ` [PATCH v2 08/10] soc: mediatek: add MT6797 power dt-bindings Mars Cheng
2017-02-09 0:37 ` Rob Herring
2017-02-09 1:32 ` Mars Cheng
2017-02-06 12:15 ` [PATCH v2 09/10] soc: mediatek: add MT6797 scysys support Mars Cheng
2017-02-06 12:15 ` [PATCH v2 10/10] arm64: dts: mediatek: add clk nodes for MT6797 Mars Cheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1486383336-16892-5-git-send-email-mars.cheng@mediatek.com \
--to=mars.cheng@mediatek.com \
--cc=Chieh-Jay.Liu@mediatek.com \
--cc=cc.hwang@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=jades.shih@mediatek.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=loda.chou@mediatek.com \
--cc=marc.zyngier@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=miles.chen@mediatek.com \
--cc=my.chuang@mediatek.com \
--cc=sboyd@codeaurora.org \
--cc=tglx@linutronix.de \
--cc=will.deacon@arm.com \
--cc=wsd_upstream@mediatek.com \
--cc=yingjoe.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox