linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Abhishek Sahu <absahu@codeaurora.org>
To: sboyd@codeaurora.org, mturquette@baylibre.com
Cc: andy.gross@linaro.org, david.brown@linaro.org,
	rnayak@codeaurora.org, linux-arm-msm@vger.kernel.org,
	linux-soc@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Abhishek Sahu <absahu@codeaurora.org>
Subject: [RFC 05/12] clk: qcom: fix 16 bit alpha support calculation
Date: Thu, 27 Jul 2017 16:40:18 +0530	[thread overview]
Message-ID: <1501153825-5181-6-git-send-email-absahu@codeaurora.org> (raw)
In-Reply-To: <1501153825-5181-1-git-send-email-absahu@codeaurora.org>

The alpha value calculation function has been written for
40 bit alpha which is not coming properly for 16 bit alpha.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 58 +++++++++++++++++++++++-----------------
 1 file changed, 34 insertions(+), 24 deletions(-)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index ef24c80..3a7ec42 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -45,8 +45,11 @@
  * Even though 40 bits are present, use only 32 for ease of calculation.
  */
 #define ALPHA_REG_BITWIDTH	40
+#define ALPHA_REG_16BIT_WIDTH	16
 #define ALPHA_BITWIDTH		32
-#define ALPHA_16BIT_MASK	0xffff
+
+#define pll_alpha_width(pll)  (pll->flags & SUPPORTS_16BIT_ALPHA ?	\
+			       ALPHA_REG_16BIT_WIDTH : ALPHA_REG_BITWIDTH)
 
 #define pll_mode(pll)		(pll->base + pll->offsets[ALPHA_PLL_MODE])
 #define pll_l(pll)		(pll->base + pll->offsets[ALPHA_PLL_L_VAL])
@@ -316,13 +319,16 @@ static void clk_alpha_pll_disable(struct clk_hw *hw)
 	regmap_update_bits(pll->clkr.regmap, pll_mode(pll), mask, 0);
 }
 
-static unsigned long alpha_pll_calc_rate(u64 prate, u32 l, u32 a)
+static unsigned long
+alpha_pll_calc_rate(u64 prate, u32 l, u32 a, u32 alpha_width)
 {
-	return (prate * l) + ((prate * a) >> ALPHA_BITWIDTH);
+	return (prate * l) + ((prate * a) >>
+		(alpha_width > ALPHA_BITWIDTH ? ALPHA_BITWIDTH : alpha_width));
 }
 
 static unsigned long
-alpha_pll_round_rate(unsigned long rate, unsigned long prate, u32 *l, u64 *a)
+alpha_pll_round_rate(unsigned long rate, unsigned long prate, u32 *l, u64 *a,
+		     u32 alpha_width)
 {
 	u64 remainder;
 	u64 quotient;
@@ -337,14 +343,16 @@ static unsigned long alpha_pll_calc_rate(u64 prate, u32 l, u32 a)
 	}
 
 	/* Upper ALPHA_BITWIDTH bits of Alpha */
-	quotient = remainder << ALPHA_BITWIDTH;
+	quotient = remainder << (alpha_width > ALPHA_BITWIDTH ?
+				 ALPHA_BITWIDTH : alpha_width);
+
 	remainder = do_div(quotient, prate);
 
 	if (remainder)
 		quotient++;
 
 	*a = quotient;
-	return alpha_pll_calc_rate(prate, *l, *a);
+	return alpha_pll_calc_rate(prate, *l, *a, alpha_width);
 }
 
 static const struct pll_vco *
@@ -363,26 +371,26 @@ static unsigned long alpha_pll_calc_rate(u64 prate, u32 l, u32 a)
 static unsigned long
 clk_alpha_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 {
-	u32 l, low, high, ctl;
-	u64 a = 0, prate = parent_rate;
 	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 l, low, high, ctl, alpha_width = pll_alpha_width(pll);
+	u64 a = 0, prate = parent_rate;
 
 	regmap_read(pll->clkr.regmap, pll_l(pll), &l);
 
 	regmap_read(pll->clkr.regmap, pll_user_ctl(pll), &ctl);
 	if (ctl & PLL_ALPHA_EN) {
 		regmap_read(pll->clkr.regmap, pll_alpha(pll), &low);
-		if (pll->flags & SUPPORTS_16BIT_ALPHA) {
-			a = low & ALPHA_16BIT_MASK;
-		} else {
+		if (alpha_width > ALPHA_BITWIDTH) {
 			regmap_read(pll->clkr.regmap, pll_alpha_u(pll),
 				    &high);
-			a = (u64)high << 32 | low;
-			a >>= ALPHA_REG_BITWIDTH - ALPHA_BITWIDTH;
+			a = (u64)high << ALPHA_BITWIDTH | low;
+			a >>= alpha_width - ALPHA_BITWIDTH;
+		} else {
+			a = low;
 		}
 	}
 
-	return alpha_pll_calc_rate(prate, l, a);
+	return alpha_pll_calc_rate(prate, l, a, alpha_width);
 }
 
 static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -390,10 +398,10 @@ static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
 	const struct pll_vco *vco;
-	u32 l;
+	u32 l, alpha_width = pll_alpha_width(pll);
 	u64 a;
 
-	rate = alpha_pll_round_rate(rate, prate, &l, &a);
+	rate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
 	vco = alpha_pll_find_vco(pll, rate);
 	if (!vco) {
 		pr_err("alpha pll not in a valid vco range\n");
@@ -402,14 +410,16 @@ static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	regmap_write(pll->clkr.regmap, pll_l(pll), l);
 
-	if (pll->flags & SUPPORTS_16BIT_ALPHA) {
-		regmap_write(pll->clkr.regmap, pll_alpha(pll),
-			     a & ALPHA_16BIT_MASK);
-	} else {
-		a <<= (ALPHA_REG_BITWIDTH - ALPHA_BITWIDTH);
-		regmap_write(pll->clkr.regmap, pll_alpha_u(pll), a >> 32);
+	if (alpha_width > ALPHA_BITWIDTH) {
+		a <<= (alpha_width - ALPHA_BITWIDTH);
+		regmap_update_bits(pll->clkr.regmap, pll_alpha_u(pll),
+				   GENMASK(0, alpha_width - ALPHA_BITWIDTH - 1),
+				   a >> ALPHA_BITWIDTH);
 	}
 
+	regmap_update_bits(pll->clkr.regmap, pll_alpha(pll),
+			   GENMASK(0, alpha_width - 1), a);
+
 	regmap_update_bits(pll->clkr.regmap, pll_user_ctl(pll),
 			   PLL_VCO_MASK << PLL_VCO_SHIFT,
 			   vco->val << PLL_VCO_SHIFT);
@@ -424,11 +434,11 @@ static long clk_alpha_pll_round_rate(struct clk_hw *hw, unsigned long rate,
 				     unsigned long *prate)
 {
 	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
-	u32 l;
+	u32 l, alpha_width = pll_alpha_width(pll);
 	u64 a;
 	unsigned long min_freq, max_freq;
 
-	rate = alpha_pll_round_rate(rate, *prate, &l, &a);
+	rate = alpha_pll_round_rate(rate, *prate, &l, &a, alpha_width);
 	if (alpha_pll_find_vco(pll, rate))
 		return rate;
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2017-07-27 11:10 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-27 11:10 [RFC 00/12] Misc patches for QCOM clocks Abhishek Sahu
2017-07-27 11:10 ` [RFC 01/12] clk: qcom: support for register offsets from rcg2 clock node Abhishek Sahu
2017-07-27 18:44   ` Stephen Boyd
2017-07-28  9:42     ` Abhishek Sahu
2017-07-28 17:55       ` Stephen Boyd
2017-07-30 12:57         ` Abhishek Sahu
2017-07-27 11:10 ` [RFC 02/12] clk: qcom: flag for 64 bit CONFIG_CTL Abhishek Sahu
2017-07-28 18:33   ` Stephen Boyd
2017-07-30 13:04     ` Abhishek Sahu
2017-08-01 21:17       ` Stephen Boyd
2017-07-27 11:10 ` [RFC 03/12] clk: qcom: support for alpha mode configuration Abhishek Sahu
2017-07-27 11:10 ` [RFC 04/12] clk: qcom: use offset from alpha pll node Abhishek Sahu
2017-07-30 13:26   ` Abhishek Sahu
2017-07-27 11:10 ` Abhishek Sahu [this message]
2017-07-27 11:10 ` [RFC 06/12] Clk: qcom: support for dynamic updating the PLL Abhishek Sahu
2017-07-28 18:34   ` Stephen Boyd
2017-07-30 13:57     ` Abhishek Sahu
2017-08-01 21:12       ` Stephen Boyd
2017-08-02 13:50         ` Abhishek Sahu
2017-07-27 11:10 ` [RFC 07/12] clk: qcom: add flag for VCO operation Abhishek Sahu
2017-07-27 11:10 ` [RFC 08/12] clk: qcom: support for Huayra PLL Abhishek Sahu
2017-07-27 11:10 ` [RFC 09/12] clk: qcom: support for Brammo PLL Abhishek Sahu
2017-07-27 11:10 ` [RFC 10/12] clk: qcom: add read-only divider operations Abhishek Sahu
2017-07-27 11:10 ` [RFC 11/12] clk: qcom: add read-only alpha pll post " Abhishek Sahu
2017-07-27 11:10 ` [RFC 12/12] clk: qcom: add parent map for regmap mux Abhishek Sahu
2017-07-27 18:39 ` [RFC 00/12] Misc patches for QCOM clocks Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1501153825-5181-6-git-send-email-absahu@codeaurora.org \
    --to=absahu@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=rnayak@codeaurora.org \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).