Re: [PATCH] clk: meson: gxbb: fix wrong clock for SARADC/SANA

[Jerome Brunet <jbrunet@baylibre.com>]

On Mon, 2017-11-06 at 15:52 +0800, Yixun Lan wrote:
> According to the datasheet, in Meson-GXBB/GXL series,
> The clock gate bit for SARADC is HHI_GCLK_MPEG2 bit[22],
> while clock gate bit for SANA is HHI_GCLK_MPEG0 bit[10].
> 
> Test passed at gxl_skt dev board.
I think this refer to a board naming used in amlogic vendor kernel ?
Would you mind telling what it is ?

> 
> Tested-by: Xingyu Chen <xingyu.chen@amlogic.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>

Subject is missing "v2" tag and a reference to the previous message:
20171103181703.30434-1-yixun.lan@amlogic.com

> 
> ---
> I think this error was introduced by a copy & paste from meson8 code?
> and we didn't notice them due to the SANA clock is also enabled by
> DTS (so SAR_ADC works fine)?
> ---
>  drivers/clk/meson/gxbb.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
> index b2d1e8ed7152..92168348ffa6 100644
> --- a/drivers/clk/meson/gxbb.c
> +++ b/drivers/clk/meson/gxbb.c
> @@ -1139,7 +1139,7 @@ static MESON_GATE(gxbb_pl301, HHI_GCLK_MPEG0, 6);
>  static MESON_GATE(gxbb_periphs, HHI_GCLK_MPEG0, 7);
>  static MESON_GATE(gxbb_spicc, HHI_GCLK_MPEG0, 8);
>  static MESON_GATE(gxbb_i2c, HHI_GCLK_MPEG0, 9);
> -static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG0, 10);
> +static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG0, 10);
>  static MESON_GATE(gxbb_smart_card, HHI_GCLK_MPEG0, 11);
>  static MESON_GATE(gxbb_rng0, HHI_GCLK_MPEG0, 12);
>  static MESON_GATE(gxbb_uart0, HHI_GCLK_MPEG0, 13);
> @@ -1190,7 +1190,7 @@ static MESON_GATE(gxbb_usb0_ddr_bridge, HHI_GCLK_MPEG2,
> 9);
>  static MESON_GATE(gxbb_mmc_pclk, HHI_GCLK_MPEG2, 11);
>  static MESON_GATE(gxbb_dvin, HHI_GCLK_MPEG2, 12);
>  static MESON_GATE(gxbb_uart2, HHI_GCLK_MPEG2, 15);
> -static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG2, 22);
> +static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG2, 22);

The value currently used in the driver are with respect to the
Datasheet of GXBB (v1.1.4) and GXL (S905X - V0.3-20170314), which are available
to the public at http://http://linux-meson.com

the adc driver is claiming both clock, so this patch should not change anything
to the adc operation.

* Is this patch fixing any issue ?
* Is it an error in the published datasheets ?

>  static MESON_GATE(gxbb_vpu_intr, HHI_GCLK_MPEG2, 25);
>  static MESON_GATE(gxbb_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
>  static MESON_GATE(gxbb_clk81_a53, HHI_GCLK_MPEG2, 29);