From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Michel Pollet To: linux-renesas-soc@vger.kernel.org, Simon Horman Cc: phil.edworthy@renesas.com, Michel Pollet , Michel Pollet , Magnus Damm , Rob Herring , Mark Rutland , Michael Turquette , Stephen Boyd , Geert Uytterhoeven , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org Subject: [PATCH v6 5/6] ARM: dts: Renesas RZN1D-DB Board base file Date: Tue, 22 May 2018 11:01:25 +0100 Message-Id: <1526983321-41949-6-git-send-email-michel.pollet@bp.renesas.com> In-Reply-To: <1526983321-41949-1-git-send-email-michel.pollet@bp.renesas.com> References: <1526983321-41949-1-git-send-email-michel.pollet@bp.renesas.com> List-ID: This adds a base device tree file for the RZN1-DB board, with only the basic support allowing the system to boot to a prompt. Only one UART is used, with only a single CPU running. Signed-off-by: Michel Pollet --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 29 +++++++++++++++++++++++++++++ 2 files changed, 30 insertions(+) create mode 100644 arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f4753b0..6157897 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -814,6 +814,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a7793-gose.dtb \ r8a7794-alt.dtb \ r8a7794-silk.dtb \ + r9a06g032-rzn1d400-db.dtb \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rv1108-evb.dtb \ diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts new file mode 100644 index 0000000..5fc2c40 --- /dev/null +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZN1D-DB Board + * + * Copyright (C) 2018 Renesas Electronics Europe Limited + * + */ + +/dts-v1/; + +#include "r9a06g032.dtsi" + +/ { + model = "RZN1D-DB Board"; + compatible = "renesas,rzn1d400-db", + "renesas,r9a06g032", "renesas,rzn1"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; -- 2.7.4