From: Anson Huang <Anson.Huang@nxp.com>
To: shawnguo@kernel.org, kernel@pengutronix.de,
fabio.estevam@nxp.com, mturquette@baylibre.com, sboyd@kernel.org
Cc: Linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V2 4/4] clk: imx6ul: remove clks_init_on array
Date: Mon, 4 Jun 2018 09:06:46 +0800 [thread overview]
Message-ID: <1528074406-11735-4-git-send-email-Anson.Huang@nxp.com> (raw)
In-Reply-To: <1528074406-11735-1-git-send-email-Anson.Huang@nxp.com>
Clock framework will enable those clocks registered
with CLK_IS_CRITICAL flag, so no need to have
clks_init_on array during clock initialization now.
ARM clock is busy divider type which has the
CLK_IS_CRITICAL flag set by default when registered.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
This patch is based on "[V2,1/2] clk: imx6ul: add GPIO clock gates".
changes since V1:
improve commit log to explain why no need to add CLK_IS_CRITICAL flag for ARM clock.
drivers/clk/imx/clk-imx6ul.c | 23 ++++++-----------------
1 file changed, 6 insertions(+), 17 deletions(-)
diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 3ea2d97..d3f7f4d 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -79,12 +79,6 @@ static const char *cko_sels[] = { "cko1", "cko2", };
static struct clk *clks[IMX6UL_CLK_END];
static struct clk_onecell_data clk_data;
-static int const clks_init_on[] __initconst = {
- IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2,
- IMX6UL_CLK_AXI, IMX6UL_CLK_ARM, IMX6UL_CLK_ROM,
- IMX6UL_CLK_MMDC_P0_FAST, IMX6UL_CLK_MMDC_P0_IPG,
-};
-
static const struct clk_div_table clk_enet_ref_table[] = {
{ .val = 0, .div = 20, },
{ .val = 1, .div = 10, },
@@ -129,7 +123,6 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
void __iomem *base;
- int i;
clks[IMX6UL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
@@ -336,8 +329,8 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
/* CCGR0 */
- clks[IMX6UL_CLK_AIPSTZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0);
- clks[IMX6UL_CLK_AIPSTZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2);
+ clks[IMX6UL_CLK_AIPSTZ1] = imx_clk_gate2_flags("aips_tz1", "ahb", base + 0x68, 0, CLK_IS_CRITICAL);
+ clks[IMX6UL_CLK_AIPSTZ2] = imx_clk_gate2_flags("aips_tz2", "ahb", base + 0x68, 2, CLK_IS_CRITICAL);
clks[IMX6UL_CLK_APBHDMA] = imx_clk_gate2("apbh_dma", "bch_podf", base + 0x68, 4);
clks[IMX6UL_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc);
clks[IMX6UL_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc);
@@ -412,9 +405,9 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_GPIO4] = imx_clk_gate2("gpio4", "ipg", base + 0x74, 12);
clks[IMX6UL_CLK_QSPI] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14);
clks[IMX6UL_CLK_WDOG1] = imx_clk_gate2("wdog1", "ipg", base + 0x74, 16);
- clks[IMX6UL_CLK_MMDC_P0_FAST] = imx_clk_gate("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20);
- clks[IMX6UL_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24);
- clks[IMX6UL_CLK_AXI] = imx_clk_gate("axi", "axi_podf", base + 0x74, 28);
+ clks[IMX6UL_CLK_MMDC_P0_FAST] = imx_clk_gate_flags("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20, CLK_IS_CRITICAL);
+ clks[IMX6UL_CLK_MMDC_P0_IPG] = imx_clk_gate2_flags("mmdc_p0_ipg", "ipg", base + 0x74, 24, CLK_IS_CRITICAL);
+ clks[IMX6UL_CLK_AXI] = imx_clk_gate_flags("axi", "axi_podf", base + 0x74, 28, CLK_IS_CRITICAL);
/* CCGR4 */
clks[IMX6UL_CLK_PER_BCH] = imx_clk_gate2("per_bch", "bch_podf", base + 0x78, 12);
@@ -428,7 +421,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "bch_podf", base + 0x78, 30);
/* CCGR5 */
- clks[IMX6UL_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
+ clks[IMX6UL_CLK_ROM] = imx_clk_gate2_flags("rom", "ahb", base + 0x7c, 0, CLK_IS_CRITICAL);
clks[IMX6UL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clks[IMX6UL_CLK_KPP] = imx_clk_gate2("kpp", "ipg", base + 0x7c, 8);
clks[IMX6UL_CLK_WDOG2] = imx_clk_gate2("wdog2", "ipg", base + 0x7c, 10);
@@ -502,10 +495,6 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clk_set_rate(clks[IMX6UL_CLK_ENET2_REF], 50000000);
clk_set_rate(clks[IMX6UL_CLK_CSI], 24000000);
- /* keep all the clks on just for bringup */
- for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
- clk_prepare_enable(clks[clks_init_on[i]]);
-
if (clk_on_imx6ull())
clk_prepare_enable(clks[IMX6UL_CLK_AIPSTZ3]);
--
2.7.4
next prev parent reply other threads:[~2018-06-04 1:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-04 1:06 [PATCH V2 1/4] clk: imx6q: remove clks_init_on array Anson Huang
2018-06-04 1:06 ` [PATCH V2 2/4] clk: imx6sl: " Anson Huang
2018-06-04 1:33 ` Fabio Estevam
2018-06-29 18:43 ` Stephen Boyd
2018-06-04 1:06 ` [PATCH V2 3/4] clk: imx6sx: " Anson Huang
2018-06-04 1:33 ` Fabio Estevam
2018-06-29 18:43 ` Stephen Boyd
2018-06-04 1:06 ` Anson Huang [this message]
2018-06-04 1:34 ` [PATCH V2 4/4] clk: imx6ul: " Fabio Estevam
2018-06-29 18:44 ` Stephen Boyd
2018-06-04 1:33 ` [PATCH V2 1/4] clk: imx6q: " Fabio Estevam
2018-06-29 18:43 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1528074406-11735-4-git-send-email-Anson.Huang@nxp.com \
--to=anson.huang@nxp.com \
--cc=Linux-imx@nxp.com \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox