[PATCH v2 0/2] Add display clock controller driver for SDM845

[Taniya Das <tdas@codeaurora.org>]

 [v2]
  * Removed unused header file includes.
  * Moved the frequency table macro to a common file [1].
  * Move to pll config to probe.
  * Update SoC name in device tree binding and
    also update the Kconfig.

Add support for the display clock controller found on SDM845
based devices. This would allow display drivers to probe and
control their clocks.

The Display clock driver depends on the frequency table macro
movement to a common file [1].

 [1]:  https://lkml.org/lkml/2018/6/13/216

Taniya Das (2):
  dt-bindings: clock: Introduce QCOM Display clock bindings
  clk: qcom: Add display clock controller driver for SDM845

 .../devicetree/bindings/clock/qcom,dispcc.txt      |  19 +
 drivers/clk/qcom/Kconfig                           |  10 +
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/dispcc-sdm845.c                   | 674 +++++++++++++++++++++
 include/dt-bindings/clock/qcom,dispcc-sdm845.h     |  45 ++
 5 files changed, 749 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,dispcc.txt
 create mode 100644 drivers/clk/qcom/dispcc-sdm845.c
 create mode 100644 include/dt-bindings/clock/qcom,dispcc-sdm845.h

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.