From: Lukasz Luba <l.luba@partner.samsung.com>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, linux-samsung-soc@vger.kernel.org
Cc: b.zolnierkie@samsung.com, krzk@kernel.org, kgene@kernel.org,
cw00.choi@samsung.com, kyungmin.park@samsung.com,
m.szyprowski@samsung.com, s.nawrocki@samsung.com,
myungjoo.ham@samsung.com,
Lukasz Luba <l.luba@partner.samsung.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/8] clk: samsung: add new clocks for DMC for Exynos5422 SoC
Date: Thu, 31 Jan 2019 09:49:48 +0100 [thread overview]
Message-ID: <1548924594-19084-3-git-send-email-l.luba@partner.samsung.com> (raw)
In-Reply-To: <1548924594-19084-1-git-send-email-l.luba@partner.samsung.com>
This patch provides support for clocks needed for Dynamic Memory Controller
in Exynos5422 SoC. It adds CDREX base register addresses, new DIV, MUX and
GATE entries.
CC: Sylwester Nawrocki <s.nawrocki@samsung.com>
CC: Chanwoo Choi <cw00.choi@samsung.com>
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: Kukjin Kim <kgene@kernel.org>
CC: Krzysztof Kozlowski <krzk@kernel.org>
CC: linux-samsung-soc@vger.kernel.org
CC: linux-clk@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
---
drivers/clk/samsung/clk-exynos5420.c | 48 +++++++++++++++++++++++++++++++++---
1 file changed, 44 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 34cce3c..3e87421 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -132,6 +132,8 @@
#define BPLL_LOCK 0x20010
#define BPLL_CON0 0x20110
#define SRC_CDREX 0x20200
+#define GATE_BUS_CDREX0 0x20700
+#define GATE_BUS_CDREX1 0x20704
#define DIV_CDREX0 0x20500
#define DIV_CDREX1 0x20504
#define KPLL_LOCK 0x28000
@@ -248,6 +250,8 @@ static const unsigned long exynos5x_clk_regs[] __initconst = {
DIV_CDREX1,
SRC_KFC,
DIV_KFC0,
+ GATE_BUS_CDREX0,
+ GATE_BUS_CDREX1,
};
static const unsigned long exynos5800_clk_regs[] __initconst = {
@@ -425,6 +429,10 @@ PNAME(mout_group13_5800_p) = { "dout_osc_div", "mout_sw_aclkfl1_550_cam" };
PNAME(mout_group14_5800_p) = { "dout_aclk550_cam", "dout_sclk_sw" };
PNAME(mout_group15_5800_p) = { "dout_osc_div", "mout_sw_aclk550_cam" };
PNAME(mout_group16_5800_p) = { "dout_osc_div", "mout_mau_epll_clk" };
+PNAME(mout_mx_mspll_ccore_phy_p) = { "sclk_bpll", "mout_dpll_ctrl",
+ "mout_mpll_ctrl", "ff_dout_spll2",
+ "mout_sclk_spll"};
+
/* fixed rate clocks generated outside the soc */
static struct samsung_fixed_rate_clock
@@ -450,7 +458,7 @@ static const struct samsung_fixed_factor_clock
static const struct samsung_fixed_factor_clock
exynos5800_fixed_factor_clks[] __initconst = {
FFACTOR(0, "ff_dout_epll2", "mout_sclk_epll", 1, 2, 0),
- FFACTOR(0, "ff_dout_spll2", "mout_sclk_spll", 1, 2, 0),
+ FFACTOR(CLK_FF_DOUT_SPLL2, "ff_dout_spll2", "mout_sclk_spll", 1, 2, 0),
};
static const struct samsung_mux_clock exynos5800_mux_clks[] __initconst = {
@@ -472,11 +480,14 @@ static const struct samsung_mux_clock exynos5800_mux_clks[] __initconst = {
MUX(0, "mout_aclk300_disp1", mout_group5_5800_p, SRC_TOP2, 24, 2),
MUX(0, "mout_aclk300_gscl", mout_group5_5800_p, SRC_TOP2, 28, 2),
+ MUX(CLK_MOUT_MX_MSPLL_CCORE_PHY, "mout_mx_mspll_ccore_phy",
+ mout_mx_mspll_ccore_phy_p, SRC_TOP7, 0, 3),
+
MUX(CLK_MOUT_MX_MSPLL_CCORE, "mout_mx_mspll_ccore",
- mout_mx_mspll_ccore_p, SRC_TOP7, 16, 2),
+ mout_mx_mspll_ccore_p, SRC_TOP7, 16, 3),
MUX_F(CLK_MOUT_MAU_EPLL, "mout_mau_epll_clk", mout_mau_epll_clk_5800_p,
SRC_TOP7, 20, 2, CLK_SET_RATE_PARENT, 0),
- MUX(0, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1),
+ MUX(CLK_SCLK_BPLL, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1),
MUX(0, "mout_epll2", mout_epll2_5800_p, SRC_TOP7, 28, 1),
MUX(0, "mout_aclk550_cam", mout_group3_5800_p, SRC_TOP8, 16, 3),
@@ -648,7 +659,7 @@ static const struct samsung_mux_clock exynos5x_mux_clks[] __initconst = {
MUX(0, "mout_sclk_mpll", mout_mpll_p, SRC_TOP6, 0, 1),
MUX(CLK_MOUT_VPLL, "mout_sclk_vpll", mout_vpll_p, SRC_TOP6, 4, 1),
- MUX(0, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1),
+ MUX(CLK_MOUT_SCLK_SPLL, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1),
MUX(0, "mout_sclk_ipll", mout_ipll_p, SRC_TOP6, 12, 1),
MUX(0, "mout_sclk_rpll", mout_rpll_p, SRC_TOP6, 16, 1),
MUX_F(CLK_MOUT_EPLL, "mout_sclk_epll", mout_epll_p, SRC_TOP6, 20, 1,
@@ -814,9 +825,13 @@ static const struct samsung_div_clock exynos5x_div_clks[] __initconst = {
DIV_CDREX0, 16, 3),
DIV(CLK_DOUT_CCLK_DREX0, "dout_cclk_drex0", "dout_clk2x_phy0",
DIV_CDREX0, 8, 3),
+ DIV(0, "dout_cclk_drex1", "dout_clk2x_phy0", DIV_CDREX0, 8, 3),
DIV(CLK_DOUT_CLK2X_PHY0, "dout_clk2x_phy0", "dout_sclk_cdrex",
DIV_CDREX0, 3, 5),
+ DIV(0, "dout_pclk_drex0", "dout_cclk_drex0", DIV_CDREX0, 28, 3),
+ DIV(0, "dout_pclk_drex1", "dout_cclk_drex1", DIV_CDREX0, 28, 3),
+
DIV(CLK_DOUT_PCLK_CORE_MEM, "dout_pclk_core_mem", "mout_mclk_cdrex",
DIV_CDREX1, 8, 3),
@@ -1170,6 +1185,31 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
GATE_TOP_SCLK_ISP, 12, CLK_SET_RATE_PARENT, 0),
GATE(CLK_G3D, "g3d", "mout_user_aclk_g3d", GATE_IP_G3D, 9, 0, 0),
+
+ GATE(CLK_CLKM_PHY0, "clkm_phy0", "dout_sclk_cdrex",
+ GATE_BUS_CDREX0, 0, 0, 0),
+ GATE(CLK_CLKM_PHY1, "clkm_phy1", "dout_sclk_cdrex",
+ GATE_BUS_CDREX0, 1, 0, 0),
+ GATE(0, "mx_mspll_ccore_phy", "mout_mx_mspll_ccore_phy",
+ SRC_MASK_TOP7, 0, CLK_IGNORE_UNUSED, 0),
+
+ GATE(CLK_ACLK_PPMU_DREX0_0, "aclk_ppmu_drex0_0", "dout_aclk_cdrex1",
+ GATE_BUS_CDREX1, 15, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_PPMU_DREX0_1, "aclk_ppmu_drex0_1", "dout_aclk_cdrex1",
+ GATE_BUS_CDREX1, 14, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_PPMU_DREX1_0, "aclk_ppmu_drex1_0", "dout_aclk_cdrex1",
+ GATE_BUS_CDREX1, 13, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_PPMU_DREX1_1, "aclk_ppmu_drex1_1", "dout_aclk_cdrex1",
+ GATE_BUS_CDREX1, 12, CLK_IGNORE_UNUSED, 0),
+
+ GATE(CLK_PCLK_PPMU_DREX0_0, "pclk_ppmu_drex0_0", "dout_pclk_cdrex",
+ GATE_BUS_CDREX1, 29, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PPMU_DREX0_1, "pclk_ppmu_drex0_1", "dout_pclk_cdrex",
+ GATE_BUS_CDREX1, 28, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PPMU_DREX1_0, "pclk_ppmu_drex1_0", "dout_pclk_cdrex",
+ GATE_BUS_CDREX1, 27, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PPMU_DREX1_1, "pclk_ppmu_drex1_1", "dout_pclk_cdrex",
+ GATE_BUS_CDREX1, 26, CLK_IGNORE_UNUSED, 0),
};
static const struct samsung_div_clock exynos5x_disp_div_clks[] __initconst = {
--
2.7.4
next parent reply other threads:[~2019-01-31 8:51 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20190131085006eucas1p1ca478545c107086d427909c88d3b232e@eucas1p1.samsung.com>
[not found] ` <1548924594-19084-1-git-send-email-l.luba@partner.samsung.com>
2019-01-31 8:49 ` Lukasz Luba [this message]
2019-02-01 8:07 ` [PATCH v3 2/8] clk: samsung: add new clocks for DMC for Exynos5422 SoC Chanwoo Choi
2019-02-01 9:20 ` Chanwoo Choi
2019-02-01 13:03 ` Lukasz Luba
2019-01-31 8:49 ` [PATCH v3 3/8] clk: samsung: add BPLL rate table for Exynos 5422 SoC Lukasz Luba
2019-02-01 8:44 ` Chanwoo Choi
2019-02-01 13:56 ` Lukasz Luba
2019-02-01 14:19 ` Sylwester Nawrocki
2019-02-01 15:39 ` Lukasz Luba
2019-02-03 7:54 ` Chanwoo Choi
2019-02-11 10:21 ` Lukasz Luba
2019-02-11 10:34 ` Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1548924594-19084-3-git-send-email-l.luba@partner.samsung.com \
--to=l.luba@partner.samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mturquette@baylibre.com \
--cc=myungjoo.ham@samsung.com \
--cc=s.nawrocki@samsung.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox