From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Heiko =?ISO-8859-1?Q?St=FCbner?= To: Caesar Wang Cc: edubezval@gmail.com, huangtao@rock-chips.com, Michael Turquette , linux-pm@vger.kernel.org, Stephen Boyd , zhangqing@rock-chips.com, linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org, Dmitry Torokhov , Jeffy Chen , Zhang Rui , linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [RESEND PATCH 7/8] ARM: dts: rockchip: add the thermal main info found on rk3228 Date: Tue, 01 Mar 2016 11:03:26 +0100 Message-ID: <1971048.7T2zBta3A8@diego> In-Reply-To: <1455521613-27340-8-git-send-email-wxt@rock-chips.com> References: <1455521613-27340-1-git-send-email-wxt@rock-chips.com> <1455521613-27340-8-git-send-email-wxt@rock-chips.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" List-ID: Am Montag, 15. Februar 2016, 15:33:32 schrieb Caesar Wang: > This patch adds the thermal needed main information for rk3228 SoCS. > > Basically has the following content: > > 1) TSADC controller: > Add the needed attributes for rk3036 TSADC controller. > > Especially for the TSHUT, in some cases if we are unable to shut it down > in orderly fashion (says: kernel is stuck holding a lock or similar), then > hardware TSHUT will reset it. > If the temperature is over 95C over a period of time the thermal shutdown > of the tsadc is invoked with can either reset the entire chip via the CRU, > or notify the PMIC via a GPIO. This should be set in the specific board. > > 2) Thermal zones: > Add the needed device mode for thermal generic framework. > Detail in Documentation/devicetree/bindings/thermal/thermal.txt. > > Signed-off-by: Caesar Wang applied to my dts32 branch for 4.6 Thanks Heiko