Re: [PATCH v7 2/9] clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks

[Jerome Brunet <jbrunet@baylibre.com>]

On Thu 03 Aug 2023 at 14:03, Neil Armstrong <neil.armstrong@linaro.org> wrote:

> Add new CTS_ENCL & CTS_ENCL_SEL clocks for the G12A compatible
> SoCs, they are used to feed the VPU LCD Pixel encoder used for
> DSI display purposes.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>  drivers/clk/meson/g12a.c | 40 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
>
> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
> index ceabd5f4b2ac..5d62134335c1 100644
> --- a/drivers/clk/meson/g12a.c
> +++ b/drivers/clk/meson/g12a.c
> @@ -3549,6 +3549,22 @@ static struct clk_regmap g12a_cts_encp_sel = {
>  	},
>  };
>  
> +static struct clk_regmap g12a_cts_encl_sel = {
> +	.data = &(struct clk_regmap_mux_data){
> +		.offset = HHI_VIID_CLK_DIV,
> +		.mask = 0xf,
> +		.shift = 12,
> +		.table = mux_table_cts_sel,
> +	},
> +	.hw.init = &(struct clk_init_data){
> +		.name = "cts_encl_sel",
> +		.ops = &clk_regmap_mux_ops,
> +		.parent_hws = g12a_cts_parent_hws,
> +		.num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
> +		.flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,

Why nocache ?
This is usually used when the consumer driver is poking around behind
CCF back.

Any chance this can use assigned-parent or CCF directly ?

> +	},
> +};
> +
>  static struct clk_regmap g12a_cts_vdac_sel = {
>  	.data = &(struct clk_regmap_mux_data){
>  		.offset = HHI_VIID_CLK_DIV,
> @@ -3628,6 +3644,22 @@ static struct clk_regmap g12a_cts_encp = {
>  	},
>  };
>  
> +static struct clk_regmap g12a_cts_encl = {
> +	.data = &(struct clk_regmap_gate_data){
> +		.offset = HHI_VID_CLK_CNTL2,
> +		.bit_idx = 3,
> +	},
> +	.hw.init = &(struct clk_init_data) {
> +		.name = "cts_encl",
> +		.ops = &clk_regmap_gate_ops,
> +		.parent_hws = (const struct clk_hw *[]) {
> +			&g12a_cts_encl_sel.hw
> +		},
> +		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,

What is the reason for IGNORE_UNUSED ?
If you need to keep the clock on while the driver comes up, please
document it here.

> +	},
> +};
> +
>  static struct clk_regmap g12a_cts_vdac = {
>  	.data = &(struct clk_regmap_gate_data){
>  		.offset = HHI_VID_CLK_CNTL2,
> @@ -4407,10 +4439,12 @@ static struct clk_hw *g12a_hw_clks[] = {
>  	[CLKID_VCLK2_DIV12]		= &g12a_vclk2_div12.hw,
>  	[CLKID_CTS_ENCI_SEL]		= &g12a_cts_enci_sel.hw,
>  	[CLKID_CTS_ENCP_SEL]		= &g12a_cts_encp_sel.hw,
> +	[CLKID_CTS_ENCL_SEL]		= &g12a_cts_encl_sel.hw,
>  	[CLKID_CTS_VDAC_SEL]		= &g12a_cts_vdac_sel.hw,
>  	[CLKID_HDMI_TX_SEL]		= &g12a_hdmi_tx_sel.hw,
>  	[CLKID_CTS_ENCI]		= &g12a_cts_enci.hw,
>  	[CLKID_CTS_ENCP]		= &g12a_cts_encp.hw,
> +	[CLKID_CTS_ENCL]		= &g12a_cts_encl.hw,
>  	[CLKID_CTS_VDAC]		= &g12a_cts_vdac.hw,
>  	[CLKID_HDMI_TX]			= &g12a_hdmi_tx.hw,
>  	[CLKID_HDMI_SEL]		= &g12a_hdmi_sel.hw,
> @@ -4632,10 +4666,12 @@ static struct clk_hw *g12b_hw_clks[] = {
>  	[CLKID_VCLK2_DIV12]		= &g12a_vclk2_div12.hw,
>  	[CLKID_CTS_ENCI_SEL]		= &g12a_cts_enci_sel.hw,
>  	[CLKID_CTS_ENCP_SEL]		= &g12a_cts_encp_sel.hw,
> +	[CLKID_CTS_ENCL_SEL]		= &g12a_cts_encl_sel.hw,
>  	[CLKID_CTS_VDAC_SEL]		= &g12a_cts_vdac_sel.hw,
>  	[CLKID_HDMI_TX_SEL]		= &g12a_hdmi_tx_sel.hw,
>  	[CLKID_CTS_ENCI]		= &g12a_cts_enci.hw,
>  	[CLKID_CTS_ENCP]		= &g12a_cts_encp.hw,
> +	[CLKID_CTS_ENCL]		= &g12a_cts_encl.hw,
>  	[CLKID_CTS_VDAC]		= &g12a_cts_vdac.hw,
>  	[CLKID_HDMI_TX]			= &g12a_hdmi_tx.hw,
>  	[CLKID_HDMI_SEL]		= &g12a_hdmi_sel.hw,
> @@ -4892,10 +4928,12 @@ static struct clk_hw *sm1_hw_clks[] = {
>  	[CLKID_VCLK2_DIV12]		= &g12a_vclk2_div12.hw,
>  	[CLKID_CTS_ENCI_SEL]		= &g12a_cts_enci_sel.hw,
>  	[CLKID_CTS_ENCP_SEL]		= &g12a_cts_encp_sel.hw,
> +	[CLKID_CTS_ENCL_SEL]		= &g12a_cts_encl_sel.hw,
>  	[CLKID_CTS_VDAC_SEL]		= &g12a_cts_vdac_sel.hw,
>  	[CLKID_HDMI_TX_SEL]		= &g12a_hdmi_tx_sel.hw,
>  	[CLKID_CTS_ENCI]		= &g12a_cts_enci.hw,
>  	[CLKID_CTS_ENCP]		= &g12a_cts_encp.hw,
> +	[CLKID_CTS_ENCL]		= &g12a_cts_encl.hw,
>  	[CLKID_CTS_VDAC]		= &g12a_cts_vdac.hw,
>  	[CLKID_HDMI_TX]			= &g12a_hdmi_tx.hw,
>  	[CLKID_HDMI_SEL]		= &g12a_hdmi_sel.hw,
> @@ -5123,10 +5161,12 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
>  	&g12a_vclk2_div12_en,
>  	&g12a_cts_enci_sel,
>  	&g12a_cts_encp_sel,
> +	&g12a_cts_encl_sel,
>  	&g12a_cts_vdac_sel,
>  	&g12a_hdmi_tx_sel,
>  	&g12a_cts_enci,
>  	&g12a_cts_encp,
> +	&g12a_cts_encl,
>  	&g12a_cts_vdac,
>  	&g12a_hdmi_tx,
>  	&g12a_hdmi_sel,