Linux clock framework development
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: neil.armstrong@linaro.org
Cc: Jerome Brunet <jbrunet@baylibre.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	Jagan Teki <jagan@amarulasolutions.com>,
	Nicolas Belin <nbelin@baylibre.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v12 2/7] clk: meson: add vclk driver
Date: Fri, 05 Apr 2024 09:00:43 +0200	[thread overview]
Message-ID: <1ja5m8p4n4.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <2cf79f07-0ae1-4267-ac08-fe40366d87d4@linaro.org>


On Thu 04 Apr 2024 at 18:59, Neil Armstrong <neil.armstrong@linaro.org> wrote:

> On 04/04/2024 10:13, Jerome Brunet wrote:
>> On Wed 03 Apr 2024 at 09:46, Neil Armstrong <neil.armstrong@linaro.org>
>> wrote:
>> 
>>> The VCLK and VCLK_DIV clocks have supplementary bits.
>>>
>>> The VCLK gate has a "SOFT RESET" bit to toggle after the whole
>>> VCLK sub-tree rate has been set, this is implemented in
>>> the gate enable callback.
>>>
>>> The VCLK_DIV clocks as enable and reset bits used to disable
>>> and reset the divider, associated with CLK_SET_RATE_GATE it ensures
>>> the rate is set while the divider is disabled and in reset mode.
>>>
>>> The VCLK_DIV enable bit isn't implemented as a gate since it's part
>>> of the divider logic and vendor does this exact sequence to ensure
>>> the divider is correctly set.
>> The checkpatch warning is still there. Is it a choice or a mistake ?
>> Documentation says "GPL v2" exists for historic reason which seems to
>> hint "GPL" is preferred, and I suppose this is why checkpatch warns for
>> it.
>
> Well I didn't see this warning, this is what I fixed:
>
> $ scripts/checkpatch.pl --strict drivers/clk/meson/vclk.c
> CHECK: Alignment should match open parenthesis
> #63: FILE: drivers/clk/meson/vclk.c:63:
> +static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw,
> +                                                    unsigned long prate)
>
> CHECK: Alignment should match open parenthesis
> #73: FILE: drivers/clk/meson/vclk.c:73:
> +static int meson_vclk_div_determine_rate(struct clk_hw *hw,
> +                                             struct clk_rate_request *req)
>
> CHECK: Alignment should match open parenthesis
> #83: FILE: drivers/clk/meson/vclk.c:83:
> +static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
> +                                       unsigned long parent_rate)
>

I would not ask a respin solely for this. It's nice to fix it but I was
mostly after the warning TBH.

> <snip>
>
> It seems that checking a commit triggers an extra check....
>
> $ scripts/checkpatch.pl --strict -G 1bac9f6aa3c3
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #58:
> new file mode 100644
>
> <snip>
>
> WARNING: Prefer "GPL" over "GPL v2" - see commit bf7fbeeae6db ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
> #203: FILE: drivers/clk/meson/vclk.c:141:
> +MODULE_LICENSE("GPL v2");

Hum, I'm running checkpatch against the mail itself, not the commit. I
still get the warning

>
> <snip>
>
> Neil
>
>> 
>>>
>>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>>> ---
>>>   drivers/clk/meson/Kconfig  |   4 ++
>>>   drivers/clk/meson/Makefile |   1 +
>>>   drivers/clk/meson/vclk.c   | 141 +++++++++++++++++++++++++++++++++++++++++++++
>>>   drivers/clk/meson/vclk.h   |  51 ++++++++++++++++
>>>   4 files changed, 197 insertions(+)
>>>
>>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>>> index 29ffd14d267b..8a9823789fa3 100644
>>> --- a/drivers/clk/meson/Kconfig
>>> +++ b/drivers/clk/meson/Kconfig
>>> @@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV
>>>   	tristate
>>>   	select COMMON_CLK_MESON_REGMAP
>>>   +config COMMON_CLK_MESON_VCLK
>>> +	tristate
>>> +	select COMMON_CLK_MESON_REGMAP
>>> +
>>>   config COMMON_CLK_MESON_CLKC_UTILS
>>>   	tristate
>>>   diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>>> index 9ee4b954c896..9ba43fe7a07a 100644
>>> --- a/drivers/clk/meson/Makefile
>>> +++ b/drivers/clk/meson/Makefile
>>> @@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o
>>>   obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o
>>>   obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o
>>>   obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
>>> +obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o
>>>     # Amlogic Clock controllers
>>>   diff --git a/drivers/clk/meson/vclk.c b/drivers/clk/meson/vclk.c
>>> new file mode 100644
>>> index 000000000000..45dc216941ea
>>> --- /dev/null
>>> +++ b/drivers/clk/meson/vclk.c
>>> @@ -0,0 +1,141 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org>
>>> + */
>>> +
>>> +#include <linux/module.h>
>>> +#include "vclk.h"
>>> +
>>> +/* The VCLK gate has a supplementary reset bit to pulse after ungating */
>>> +
>>> +static inline struct meson_vclk_gate_data *
>>> +clk_get_meson_vclk_gate_data(struct clk_regmap *clk)
>>> +{
>>> +	return (struct meson_vclk_gate_data *)clk->data;
>>> +}
>>> +
>>> +static int meson_vclk_gate_enable(struct clk_hw *hw)
>>> +{
>>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>>> +	struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
>>> +
>>> +	meson_parm_write(clk->map, &vclk->enable, 1);
>>> +
>>> +	/* Do a reset pulse */
>>> +	meson_parm_write(clk->map, &vclk->reset, 1);
>>> +	meson_parm_write(clk->map, &vclk->reset, 0);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static void meson_vclk_gate_disable(struct clk_hw *hw)
>>> +{
>>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>>> +	struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
>>> +
>>> +	meson_parm_write(clk->map, &vclk->enable, 0);
>>> +}
>>> +
>>> +static int meson_vclk_gate_is_enabled(struct clk_hw *hw)
>>> +{
>>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>>> +	struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
>>> +
>>> +	return meson_parm_read(clk->map, &vclk->enable);
>>> +}
>>> +
>>> +const struct clk_ops meson_vclk_gate_ops = {
>>> +	.enable = meson_vclk_gate_enable,
>>> +	.disable = meson_vclk_gate_disable,
>>> +	.is_enabled = meson_vclk_gate_is_enabled,
>>> +};
>>> +EXPORT_SYMBOL_GPL(meson_vclk_gate_ops);
>>> +
>>> +/* The VCLK Divider has supplementary reset & enable bits */
>>> +
>>> +static inline struct meson_vclk_div_data *
>>> +clk_get_meson_vclk_div_data(struct clk_regmap *clk)
>>> +{
>>> +	return (struct meson_vclk_div_data *)clk->data;
>>> +}
>>> +
>>> +static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw,
>>> +						unsigned long prate)
>>> +{
>>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>>> +	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>>> +
>>> +	return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div),
>>> +				   vclk->table, vclk->flags, vclk->div.width);
>>> +}
>>> +
>>> +static int meson_vclk_div_determine_rate(struct clk_hw *hw,
>>> +					 struct clk_rate_request *req)
>>> +{
>>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>>> +	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>>> +
>>> +	return divider_determine_rate(hw, req, vclk->table, vclk->div.width,
>>> +				      vclk->flags);
>>> +}
>>> +
>>> +static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
>>> +				   unsigned long parent_rate)
>>> +{
>>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>>> +	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>>> +	int ret;
>>> +
>>> +	ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width,
>>> +			      vclk->flags);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	meson_parm_write(clk->map, &vclk->div, ret);
>>> +
>>> +	return 0;
>>> +};
>>> +
>>> +static int meson_vclk_div_enable(struct clk_hw *hw)
>>> +{
>>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>>> +	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>>> +
>>> +	/* Unreset the divider when ungating */
>>> +	meson_parm_write(clk->map, &vclk->reset, 0);
>>> +	meson_parm_write(clk->map, &vclk->enable, 1);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static void meson_vclk_div_disable(struct clk_hw *hw)
>>> +{
>>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>>> +	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>>> +
>>> +	/* Reset the divider when gating */
>>> +	meson_parm_write(clk->map, &vclk->enable, 0);
>>> +	meson_parm_write(clk->map, &vclk->reset, 1);
>>> +}
>>> +
>>> +static int meson_vclk_div_is_enabled(struct clk_hw *hw)
>>> +{
>>> +	struct clk_regmap *clk = to_clk_regmap(hw);
>>> +	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>>> +
>>> +	return meson_parm_read(clk->map, &vclk->enable);
>>> +}
>>> +
>>> +const struct clk_ops meson_vclk_div_ops = {
>>> +	.recalc_rate = meson_vclk_div_recalc_rate,
>>> +	.determine_rate = meson_vclk_div_determine_rate,
>>> +	.set_rate = meson_vclk_div_set_rate,
>>> +	.enable = meson_vclk_div_enable,
>>> +	.disable = meson_vclk_div_disable,
>>> +	.is_enabled = meson_vclk_div_is_enabled,
>>> +};
>>> +EXPORT_SYMBOL_GPL(meson_vclk_div_ops);
>>> +
>>> +MODULE_DESCRIPTION("Amlogic vclk clock driver");
>>> +MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");
>>> +MODULE_LICENSE("GPL v2");
>>> diff --git a/drivers/clk/meson/vclk.h b/drivers/clk/meson/vclk.h
>>> new file mode 100644
>>> index 000000000000..20b0b181db09
>>> --- /dev/null
>>> +++ b/drivers/clk/meson/vclk.h
>>> @@ -0,0 +1,51 @@
>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>> +/*
>>> + * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org>
>>> + */
>>> +
>>> +#ifndef __VCLK_H
>>> +#define __VCLK_H
>>> +
>>> +#include "clk-regmap.h"
>>> +#include "parm.h"
>>> +
>>> +/**
>>> + * struct meson_vclk_gate_data - vclk_gate regmap backed specific data
>>> + *
>>> + * @enable:	vclk enable field
>>> + * @reset:	vclk reset field
>>> + * @flags:	hardware-specific flags
>>> + *
>>> + * Flags:
>>> + * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored
>>> + */
>>> +struct meson_vclk_gate_data {
>>> +	struct parm enable;
>>> +	struct parm reset;
>>> +	u8 flags;
>>> +};
>>> +
>>> +extern const struct clk_ops meson_vclk_gate_ops;
>>> +
>>> +/**
>>> + * struct meson_vclk_div_data - vclk_div regmap back specific data
>>> + *
>>> + * @div:	divider field
>>> + * @enable:	vclk divider enable field
>>> + * @reset:	vclk divider reset field
>>> + * @table:	array of value/divider pairs, last entry should have div = 0
>>> + *
>>> + * Flags:
>>> + * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored
>>> + */
>>> +struct meson_vclk_div_data {
>>> +	struct parm div;
>>> +	struct parm enable;
>>> +	struct parm reset;
>>> +	const struct clk_div_table *table;
>>> +	u8 flags;
>>> +};
>>> +
>>> +extern const struct clk_ops meson_vclk_div_ops;
>>> +
>>> +#endif /* __VCLK_H */
>> 


-- 
Jerome

  reply	other threads:[~2024-04-05  8:58 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-03  7:46 [PATCH v12 0/7] drm/meson: add support for MIPI DSI Display Neil Armstrong
2024-04-03  7:46 ` [PATCH v12 1/7] dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module Neil Armstrong
2024-04-03  7:46 ` [PATCH v12 2/7] clk: meson: add vclk driver Neil Armstrong
2024-04-04  8:13   ` Jerome Brunet
2024-04-04 16:59     ` Neil Armstrong
2024-04-05  7:00       ` Jerome Brunet [this message]
2024-04-08  9:19         ` neil.armstrong
2024-04-03  7:46 ` [PATCH v12 3/7] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF Neil Armstrong
2024-04-03  7:46 ` [PATCH v12 4/7] drm/meson: gate px_clk when setting rate Neil Armstrong
2024-04-10  9:41   ` Nicolas Belin
2024-04-10 19:34   ` Martin Blumenstingl
2024-04-12 13:03     ` Neil Armstrong
2024-04-22 16:51     ` Neil Armstrong
2024-04-03  7:46 ` [PATCH v12 5/7] arm64: meson: g12-common: add the MIPI DSI nodes Neil Armstrong
2024-04-03  7:46 ` [PATCH v12 6/7] arm64: meson: khadas-vim3l: add TS050 DSI panel overlay Neil Armstrong
2024-04-03  7:46 ` [PATCH v12 7/7] arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper Neil Armstrong
2024-04-03 14:15 ` [PATCH v12 0/7] drm/meson: add support for MIPI DSI Display Rob Herring
2024-04-10  8:44 ` (subset) " Jerome Brunet
2024-04-10  8:54 ` Neil Armstrong
2024-04-22 16:57 ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1ja5m8p4n4.fsf@starbuckisacylon.baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=airlied@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jagan@amarulasolutions.com \
    --cc=khilman@baylibre.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mripard@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=nbelin@baylibre.com \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox