From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Tue, 22 Sep 2015 14:47:08 +0200 From: Maxime Ripard To: Chen-Yu Tsai Cc: Mike Turquette , Stephen Boyd , linux-arm-kernel , Hans de Goede , linux-clk , linux-kernel , linux-sunxi Subject: Re: [PATCH 5/5] ARM: sun5i: Add C.H.I.P DTS Message-ID: <20150922124708.GZ4684@lukather> References: <1442566130-3497-1-git-send-email-maxime.ripard@free-electrons.com> <1442566130-3497-6-git-send-email-maxime.ripard@free-electrons.com> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="UqCbVBp1ux8j3oph" In-Reply-To: List-ID: --UqCbVBp1ux8j3oph Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sat, Sep 19, 2015 at 12:41:07AM +0800, Chen-Yu Tsai wrote: > On Fri, Sep 18, 2015 at 4:48 PM, Maxime Ripard > wrote: > > The C.H.I.P. is a small SBC with an Allwinner R8, 8GB of NAND, 512MB of > > RAM, USB host and OTG, a wifi / bluetooth combo chip, an audio/video ja= ck > > and two connectors to plug additional boards on top of it. > > > > Signed-off-by: Maxime Ripard > > --- > > arch/arm/boot/dts/Makefile | 3 +- > > arch/arm/boot/dts/sun5i-r8-chip.dts | 261 ++++++++++++++++++++++++++++= ++++++++ > > 2 files changed, 263 insertions(+), 1 deletion(-) > > create mode 100644 arch/arm/boot/dts/sun5i-r8-chip.dts > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index b276174b670a..7efd37b907f1 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -599,7 +599,8 @@ dtb-$(CONFIG_MACH_SUN5I) +=3D \ > > sun5i-a13-inet-98v-rev2.dtb \ > > sun5i-a13-olinuxino.dtb \ > > sun5i-a13-olinuxino-micro.dtb \ > > - sun5i-a13-utoo-p66.dtb > > + sun5i-a13-utoo-p66.dtb \ > > + sun5i-r8-chip.dtb > > dtb-$(CONFIG_MACH_SUN6I) +=3D \ > > sun6i-a31-app4-evb1.dtb \ > > sun6i-a31-colombus.dtb \ > > diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/su= n5i-r8-chip.dts > > new file mode 100644 > > index 000000000000..6cb3c4f1cd61 > > --- /dev/null > > +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts > > @@ -0,0 +1,261 @@ > > +/* > > + * Copyright 2015 Free Electrons > > + * Copyright 2015 NextThing Co > > + * > > + * Maxime Ripard > > + * > > + * This file is dual-licensed: you can use it either under the terms > > + * of the GPL or the X11 license, at your option. Note that this dual > > + * licensing only applies to this file, and not this project as a > > + * whole. > > + * > > + * a) This file is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation; either version 2 of = the > > + * License, or (at your option) any later version. > > + * > > + * This file is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * Or, alternatively, > > + * > > + * b) Permission is hereby granted, free of charge, to any person > > + * obtaining a copy of this software and associated documentation > > + * files (the "Software"), to deal in the Software without > > + * restriction, including without limitation the rights to use, > > + * copy, modify, merge, publish, distribute, sublicense, and/or > > + * sell copies of the Software, and to permit persons to whom the > > + * Software is furnished to do so, subject to the following > > + * conditions: > > + * > > + * The above copyright notice and this permission notice shall be > > + * included in all copies or substantial portions of the Software. > > + * > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > > + * OTHER DEALINGS IN THE SOFTWARE. > > + */ > > + > > +/dts-v1/; > > +#include "sun5i-a13.dtsi" > > + > > +#include > > +#include > > + > > +/ { > > + model =3D "NextThing C.H.I.P."; > > + compatible =3D "nextthing,chip", "allwinner,sun5i-r8"; > > + > > + aliases { > > + i2c0 =3D &i2c0; > > + i2c1 =3D &i2c1; > > + i2c2 =3D &i2c2; > > + serial0 =3D &uart1; > > + serial1 =3D &uart3; > > + }; > > + > > + chosen { > > + stdout-path =3D "serial0:115200n8"; > > + }; > > + > > + dram_vcc: dram_vcc { > > + compatible =3D "regulator-fixed"; > > + regulator-name =3D "dram-vcc"; > > + regulator-min-microvolt =3D <1600000>; > > + regulator-max-microvolt =3D <1600000>; > > + vin-supply =3D <&ipsout>; > > + regulator-always-on; > > + }; >=20 > Do we need this if it's not controllable? Probably not, except if we want a comprehensive regulator tree. > > + > > + ipsout: ipsout { > > + compatible =3D "regulator-fixed"; > > + regulator-name =3D "ipsout"; > > + regulator-min-microvolt =3D <5000000>; > > + regulator-max-microvolt =3D <5000000>; > > + regulator-always-on; > > + }; >=20 > This isn't needed. What we might want is a proper representation > of the AXP209's power supply. Probably. > > + > > + usb0_vbus: usb0_vbus { > > + compatible =3D "regulator-fixed"; > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&chip_vbus_pin>; > > + > > + regulator-name =3D "vbus-usb0"; > > + regulator-min-microvolt =3D <5000000>; > > + regulator-max-microvolt =3D <5000000>; > > + vin-supply =3D <&vcc_5v0>; > > + gpio =3D <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ > > + enable-active-high; > > + }; > > + > > + vcc_3v3: vcc3v3 { > > + compatible =3D "regulator-fixed"; > > + regulator-name =3D "vcc-3v3"; > > + regulator-min-microvolt =3D <3300000>; > > + regulator-max-microvolt =3D <3300000>; > > + vin-supply =3D <&ipsout>; > > + regulator-always-on; > > + }; > > + > > + vcc_5v0: vcc5v0 { > > + compatible =3D "regulator-fixed"; > > + regulator-name =3D "vcc-5v0"; > > + regulator-min-microvolt =3D <5000000>; > > + regulator-max-microvolt =3D <5000000>; > > + vin-supply =3D <&ipsout>; > > + regulator-always-on; > > + }; >=20 > We have these in sunxi-common-regulators.dtsi. True, I'll change that. >=20 > > +}; > > + > > +&ehci0 { > > + status =3D "okay"; > > +}; > > + > > +&i2c0 { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&i2c0_pins_a>; > > + status =3D "okay"; > > + > > + axp209: pmic@34 { > > + reg =3D <0x34>; > > + > > + /* > > + * The interrupt is routed through the "External Fast > > + * Interrupt Request" pin (ball G13 of the module) > > + * directly to the main interrupt controller, without > > + * any other controller interfering. > > + */ > > + interrupts =3D <0>; > > + }; > > +}; > > + > > +#include "axp209.dtsi" > > + > > +/* > > + * i2c1 is routed to the external pins and doesn't have any device > > + * attached to it on the C.H.I.P itself. > > + */ > > +&i2c1 { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&i2c1_pins_a>; > > + status =3D "okay"; > > +}; > > + > > +&i2c2 { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&i2c2_pins_a>; > > + status =3D "okay"; > > + > > + xio: gpio@38 { > > + compatible =3D "nxp,pcf8574a"; > > + reg =3D <0x38>; > > + > > + gpio-controller; > > + #gpio-cells =3D <2>; > > + > > + interrupt-parent =3D <&pio>; > > + interrupts =3D <6 0 IRQ_TYPE_EDGE_FALLING>; > > + interrupt-controller; > > + #interrupt-cells =3D <2>; > > + }; > > +}; > > + > > +&mmc0 { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&mmc0_pins_a>; > > + vmmc-supply =3D <&vcc_3v3>; > > + bus-width =3D <4>; > > + non-removable; > > + status =3D "okay"; > > +}; > > + > > +&ohci0 { > > + status =3D "okay"; > > +}; > > + > > +&otg_sram { > > + status =3D "okay"; > > +}; > > + > > +&pio { > > + chip_vbus_pin: chip_vbus_pin@0 { > > + allwinner,pins =3D "PB10"; > > + allwinner,function =3D "gpio_out"; > > + allwinner,drive =3D ; > > + allwinner,pull =3D ; > > + }; > > + > > + chip_id_det_pin: chip_id_det_pin@0 { > > + allwinner,pins =3D "PG2"; > > + allwinner,function =3D "gpio_in"; > > + allwinner,drive =3D ; > > + allwinner,pull =3D ; > > + }; > > +}; > > + > > +®_dcdc2 { > > + regulator-min-microvolt =3D <1000000>; > > + regulator-max-microvolt =3D <1400000>; > > + regulator-name =3D "cpuvdd"; > > + regulator-always-on; > > +}; > > + > > +®_dcdc3 { > > + regulator-min-microvolt =3D <1000000>; > > + regulator-max-microvolt =3D <1300000>; > > + regulator-name =3D "corevdd"; > > + regulator-always-on; > > +}; > > + > > +®_ldo1 { > > + regulator-name =3D "rtcvdd"; > > +}; > > + > > +®_ldo2 { > > + regulator-min-microvolt =3D <2700000>; > > + regulator-max-microvolt =3D <3300000>; >=20 > Maybe just fix this to 3.0V? Those are constraints that the board can accept. We have that information, why lie about it? >=20 > > + regulator-name =3D "avcc"; > > + regulator-always-on; > > +}; > > + > > +®_ldo5 { > > + regulator-min-microvolt =3D <1800000>; > > + regulator-max-microvolt =3D <1800000>; > > + regulator-name =3D "vcc-1v8"; >=20 > A comment here saying this is found on the header, and to be used > by overlays would be nice. There's open schematics for that kind of information. > > +}; > > + > > +&uart1 { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&uart1_pins_b>; > > + status =3D "okay"; > > +}; > > + > > +&uart3 { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&uart3_pins_a>, > > + <&uart3_pins_cts_rts_a>; > > + status =3D "okay"; > > +}; > > + > > +&usb_otg { > > + dr_mode =3D "otg"; > > + status =3D "okay"; > > +}; > > + > > +&usbphy { > > + pinctrl-names =3D "default"; > > + pinctrl-0 =3D <&chip_id_det_pin>; > > + status =3D "okay"; > > + > > + usb0_id_det-gpio =3D <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ >=20 > Better leave a comment here saying VBUS detection requires AXP209 > usb-power-supply support. Does it? It can be powered by a battery, with or without VBUS, and that wouldn't be tied to the fact that the power-supply is USB or something else. Maxime --=20 Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com --UqCbVBp1ux8j3oph Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAEBAgAGBQJWAU3MAAoJEBx+YmzsjxAgDdoQAKX07tazECRcU+rYoQ8Coxjf 2aiSTnIu18uxKD5kXI/1dimQy3WQWb62oOKRXQXsXjWOekU5t4uk7lQjzUkPzTdQ 6Yx5URSBWWCftNdIvyPCVY44F8DnOJ2vFaOLkHuCTF0m3gnJomjwIvVmhG+STGci JcEgLGSMWzYzBeVVFU3MHxqW7YOO52oWEl85Va2J4colDVpDO38WN9meJqfOfvMV 4riwIseUvvxk3RPSoU91Dcw9OR10v69809ud/AnskQEambSmQKEjTblhvOSPrySQ AU8FwLh3xdchE1y8d2Isx4XdVo40KM7W83JKFeHI9U2UgHuUmBA7IAZdADBqBU/R ki+oox4fNb+fkpuN0DR19AzamubYqvQ4m5o+V8zZ2680RNe/kLku+K1w8jscDczo 4URJveKrOQbNPfcLhfH83StUY3bBcQ2CUbvPf3oju+eQORuPSl/vQN+9KAHRLOq3 JDVs9zKUEH9ycv/A95bpumHBvmh8G/NhZL6JrefjeRGMj7NuD9Idi/UGdnQxqSKC y2bF5k8L9du4qiFdRqYCrh05h2qn2vGIab7wDkRqusY/oIdhJFcV9ZhKywxNp66e DBHgCj4GqOXhlbVFXfAXzPsrxN0pY7z6GC1woSdndlOovfZDBMadbimvN6KIlyzI dTlrzVjSnY1kcfxY71O4 =eQIS -----END PGP SIGNATURE----- --UqCbVBp1ux8j3oph--