linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Alim Akhtar <alim.akhtar@samsung.com>
Cc: broonie@kernel.org, k.kozlowski@samsung.com,
	mturquette@baylibre.com, linux-samsung-soc@vger.kernel.org,
	linux-clk@vger.kernel.org, rtc-linux@googlegroups.com,
	linux-kernel@vger.kernel.org,
	Thomas Abraham <thomas.ab@samsung.com>
Subject: Re: [PATCH v2 2/5] mfd: sec: Add support for S2MPS15 PMIC
Date: Mon, 26 Oct 2015 14:29:30 +0000	[thread overview]
Message-ID: <20151026142930.GJ597@x1> (raw)
In-Reply-To: <562E1F84.2000105@samsung.com>

On Mon, 26 Oct 2015, Alim Akhtar wrote:

> Hi Lee,
> Thanks for looking into this.
> 
> On 10/26/2015 04:36 PM, Lee Jones wrote:
> >On Mon, 26 Oct 2015, Alim Akhtar wrote:
> >
> >>From: Thomas Abraham <thomas.ab@samsung.com>
> >>
> >>Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15
> >>PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz
> >>clock outputs and battery charger. This patch adds initial support for
> >>LDO and buck regulators of S2MPS15 device.
> >>
> >>Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> >>Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> >>[Alim: Added s2mps15_devs like rtc and clk and related changes]
> >>Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> >>---
> >>  drivers/mfd/sec-core.c              |   31 +++++++
> >>  drivers/mfd/sec-irq.c               |    8 ++
> >>  include/linux/mfd/samsung/core.h    |    1 +
> >>  include/linux/mfd/samsung/s2mps15.h |  161 +++++++++++++++++++++++++++++++++++
> >>  4 files changed, 201 insertions(+)
> >>  create mode 100644 include/linux/mfd/samsung/s2mps15.h
> >>
> >>diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
> >>index 2626fc0b5b8c..db3d4d4ff805 100644
> >>--- a/drivers/mfd/sec-core.c
> >>+++ b/drivers/mfd/sec-core.c
> >>@@ -29,6 +29,7 @@
> >>  #include <linux/mfd/samsung/s2mps11.h>
> >>  #include <linux/mfd/samsung/s2mps13.h>
> >>  #include <linux/mfd/samsung/s2mps14.h>
> >>+#include <linux/mfd/samsung/s2mps15.h>
> >>  #include <linux/mfd/samsung/s2mpu02.h>
> >>  #include <linux/mfd/samsung/s5m8763.h>
> >>  #include <linux/mfd/samsung/s5m8767.h>
> >>@@ -96,6 +97,17 @@ static const struct mfd_cell s2mps14_devs[] = {
> >>  	}
> >>  };
> >>
> >>+static const struct mfd_cell s2mps15_devs[] = {
> >>+	{
> >>+		.name = "s2mps15-pmic",
> >>+	}, {
> >>+		.name = "s2mps15-rtc",
> >>+	}, {
> >
> >Why don't these have compatibles?
> >
> s2mps15-pmic does have compatible below in sec_dt_match[].

Woah!!  What's going on here?  You're matching the MFD and Regulator
drivers with the same compatible string.  And then registering the
Regulator device as an MFD.  That's a bit confusing don't you think?

> s2mps15-rtc does not need one as rtc driver does not support OF yet.
> So no DT node for this as of now.

[...]

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2015-10-26 14:29 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-26 10:36 [PATCH v2 0/5] mfd: sec: add S2MPS15 PMIC support Alim Akhtar
2015-10-26 10:36 ` [PATCH v2 1/5] dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC Alim Akhtar
2015-10-26 11:09   ` Lee Jones
2015-10-26 12:42     ` Alim Akhtar
2015-10-26 10:36 ` [PATCH v2 2/5] mfd: sec: Add support for S2MPS15 PMIC Alim Akhtar
2015-10-26 11:06   ` Lee Jones
2015-10-26 12:41     ` Alim Akhtar
2015-10-26 14:29       ` Lee Jones [this message]
2015-10-27  5:28         ` Alim Akhtar
2015-10-26 10:36 ` [PATCH v2 3/5] regulator: s2mps11: add support for S2MPS15 regulators Alim Akhtar
2015-10-26 10:36 ` [PATCH v2 4/5] clk: s2mps15: Add support for S2MPS15 clocks Alim Akhtar
2015-10-26 10:36 ` [PATCH v2 5/5] drivers/rtc/rtc-s5m.c: add support for S2MPS15 RTC Alim Akhtar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151026142930.GJ597@x1 \
    --to=lee.jones@linaro.org \
    --cc=alim.akhtar@samsung.com \
    --cc=broonie@kernel.org \
    --cc=k.kozlowski@samsung.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=rtc-linux@googlegroups.com \
    --cc=thomas.ab@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).