* Re: [PATCH v3 5/8] MIPS: Loongson-1A: Workaround for pll register can't be read
[not found] ` <1456793296-17120-6-git-send-email-zhoubb@lemote.com>
@ 2016-04-04 7:29 ` Ralf Baechle
2016-04-22 23:14 ` Stephen Boyd
0 siblings, 1 reply; 2+ messages in thread
From: Ralf Baechle @ 2016-04-04 7:29 UTC (permalink / raw)
To: Binbin Zhou, Michael Turquette, Stephen Boyd, linux-clk
Cc: John Crispin, Steven J . Hill, linux-mips, Fuxin Zhang,
Zhangjin Wu, Kelvin Cheung, Chunbo Cui, Huacai Chen
Please cc the clk maintainers and list on patches like this:
COMMON CLK FRAMEWORK
M: Michael Turquette <mturquette@baylibre.com>
M: Stephen Boyd <sboyd@codeaurora.org>
L: linux-clk@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git
S: Maintained
F: drivers/clk/
X: drivers/clk/clkdev.c
F: include/linux/clk-pr*
F: include/linux/clk/
Ralf
On Tue, Mar 01, 2016 at 08:48:13AM +0800, Binbin Zhou wrote:
> Date: Tue, 1 Mar 2016 08:48:13 +0800
> From: Binbin Zhou <zhoubb@lemote.com>
> To: Ralf Baechle <ralf@linux-mips.org>
> Cc: John Crispin <john@phrozen.org>, "Steven J . Hill"
> <Steven.Hill@imgtec.com>, linux-mips@linux-mips.org, Fuxin Zhang
> <zhangfx@lemote.com>, Zhangjin Wu <wuzhangjin@gmail.com>, Kelvin Cheung
> <keguang.zhang@gmail.com>, Binbin Zhou <zhoubb@lemote.com>, Chunbo Cui
> <cuicb@lemote.com>, Huacai Chen <chenhc@lemote.com>
> Subject: [PATCH v3 5/8] MIPS: Loongson-1A: Workaround for pll register
> can't be read
>
> This is Loongson 1A's bug that the pll register can't be read,
> so we set the cpu clk in the inline command line.
>
> The command line format is cpu_clk=osc_clk,cpu_mul,
> the osc_clk standby cpu clock and the cpu_mul repect the clock multiplier.
> For example, we use the command is cpu_clk=33333333,8
>
> Signed-off-by: Chunbo Cui <cuicb@lemote.com>
> Signed-off-by: Binbin Zhou <zhoubb@lemote.com>
> Signed-off-by: Huacai Chen <chenhc@lemote.com>
> ---
> arch/mips/include/asm/mach-loongson32/loongson1.h | 2 ++
> arch/mips/loongson32/common/platform.c | 8 +++++++-
> arch/mips/loongson32/common/time.c | 16 ++++++++++++++++
> arch/mips/loongson32/ls1a/board.c | 2 ++
> drivers/clk/clk-ls1x.c | 19 +++++++++++++++----
> 5 files changed, 42 insertions(+), 5 deletions(-)
>
> diff --git a/arch/mips/include/asm/mach-loongson32/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h
> index 3061e64..82f951e 100644
> --- a/arch/mips/include/asm/mach-loongson32/loongson1.h
> +++ b/arch/mips/include/asm/mach-loongson32/loongson1.h
> @@ -165,6 +165,8 @@
> #define ls1x_writew(val, addr) (*(volatile u16 *)CKSEG1ADDR(addr) = (val))
> #define ls1x_writel(val, addr) (*(volatile u32 *)CKSEG1ADDR(addr) = (val))
>
> +extern unsigned int ls1a_osc_clk, ls1a_cpu_mul;
> +
> #include <regs-clk.h>
> #include <regs-mux.h>
> #include <regs-pwm.h>
> diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
> index 97d8c01..a5bb1eb 100644
> --- a/arch/mips/loongson32/common/platform.c
> +++ b/arch/mips/loongson32/common/platform.c
> @@ -63,9 +63,14 @@ struct platform_device ls1x_uart_pdev = {
>
> void __init ls1x_serial_setup(struct platform_device *pdev)
> {
> - struct clk *clk;
> struct plat_serial8250_port *p;
>
> +#ifdef CONFIG_CPU_LOONGSON1A
> + for (p = pdev->dev.platform_data; p->flags != 0; ++p)
> + p->uartclk = ls1a_osc_clk * 2;
> +#else
> + struct clk *clk;
> +
> clk = clk_get(&pdev->dev, pdev->name);
> if (IS_ERR(clk)) {
> pr_err("unable to get %s clock, err=%ld",
> @@ -76,6 +81,7 @@ void __init ls1x_serial_setup(struct platform_device *pdev)
>
> for (p = pdev->dev.platform_data; p->flags != 0; ++p)
> p->uartclk = clk_get_rate(clk);
> +#endif
> }
>
> /* CPUFreq */
> diff --git a/arch/mips/loongson32/common/time.c b/arch/mips/loongson32/common/time.c
> index 0996b02..bba1c84 100644
> --- a/arch/mips/loongson32/common/time.c
> +++ b/arch/mips/loongson32/common/time.c
> @@ -235,3 +235,19 @@ void __init plat_time_init(void)
> mips_hpt_frequency = clk_get_rate(clk) / 2;
> #endif /* CONFIG_CEVT_CSRC_LS1X */
> }
> +
> +#ifdef CONFIG_CPU_LOONGSON1A
> +unsigned int ls1a_osc_clk = 0, ls1a_cpu_mul = 0;
> +
> +static int __init get_cpu_clk(char *string)
> +{
> + int ret;
> +
> + ret = sscanf(string, "%u,%u", &ls1a_osc_clk, &ls1a_cpu_mul);
> + if (ret != 1)
> + return -EINVAL;
> +
> + return 1;
> +}
> +__setup("cpu_clk=", get_cpu_clk);
> +#endif
> diff --git a/arch/mips/loongson32/ls1a/board.c b/arch/mips/loongson32/ls1a/board.c
> index 98fb86c..9c53ecc 100644
> --- a/arch/mips/loongson32/ls1a/board.c
> +++ b/arch/mips/loongson32/ls1a/board.c
> @@ -95,6 +95,8 @@ int __init ls1a_platform_init(void)
> {
> ls1a_route_setting();
>
> + ls1x_serial_setup(&ls1x_uart_pdev);
> +
> i2c_register_board_info(1, &ls1a_pcf8563, 1);
> spi_register_board_info(ls1a_spi_info, ARRAY_SIZE(ls1a_spi_info));
>
> diff --git a/drivers/clk/clk-ls1x.c b/drivers/clk/clk-ls1x.c
> index d4c6198..18326fb 100644
> --- a/drivers/clk/clk-ls1x.c
> +++ b/drivers/clk/clk-ls1x.c
> @@ -32,6 +32,14 @@ static void ls1x_pll_clk_disable(struct clk_hw *hw)
> static unsigned long ls1x_pll_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate)
> {
> +#ifdef CONFIG_CPU_LOONGSON1A
> + /* workaround, loongson 1A pll register can't be read,
> + * on gateway board, multi is set to 11 */
> + if (ls1a_osc_clk != 0 && ls1a_cpu_mul != 0)
> + return ls1a_osc_clk * ls1a_cpu_mul;
> + else
> + return 33333333 * 8;
> +#else
> u32 pll, rate;
>
> pll = __raw_readl(LS1X_CLK_PLL_FREQ);
> @@ -40,6 +48,7 @@ static unsigned long ls1x_pll_recalc_rate(struct clk_hw *hw,
> rate >>= 1;
>
> return rate;
> +#endif
> }
>
> static const struct clk_ops ls1x_pll_clk_ops = {
> @@ -107,7 +116,8 @@ void __init ls1x_clk_init(void)
> CLK_GET_RATE_NOCACHE, LS1X_CLK_PLL_DIV,
> DIV_CPU_SHIFT, DIV_CPU_WIDTH,
> CLK_DIVIDER_ONE_BASED |
> - CLK_DIVIDER_ROUND_CLOSEST, &_lock);
> + CLK_DIVIDER_ROUND_CLOSEST |
> + CLK_DIVIDER_ALLOW_ZERO, &_lock);
> clk_register_clkdev(clk, "cpu_clk_div", NULL);
> clk = clk_register_mux(NULL, "cpu_clk", cpu_parents,
> ARRAY_SIZE(cpu_parents),
> @@ -123,7 +133,8 @@ void __init ls1x_clk_init(void)
> */
> clk = clk_register_divider(NULL, "dc_clk_div", "pll_clk",
> 0, LS1X_CLK_PLL_DIV, DIV_DC_SHIFT,
> - DIV_DC_WIDTH, CLK_DIVIDER_ONE_BASED, &_lock);
> + DIV_DC_WIDTH, CLK_DIVIDER_ONE_BASED |
> + CLK_DIVIDER_ALLOW_ZERO, &_lock);
> clk_register_clkdev(clk, "dc_clk_div", NULL);
> clk = clk_register_mux(NULL, "dc_clk", dc_parents,
> ARRAY_SIZE(dc_parents),
> @@ -139,8 +150,8 @@ void __init ls1x_clk_init(void)
> */
> clk = clk_register_divider(NULL, "ahb_clk_div", "pll_clk",
> 0, LS1X_CLK_PLL_DIV, DIV_DDR_SHIFT,
> - DIV_DDR_WIDTH, CLK_DIVIDER_ONE_BASED,
> - &_lock);
> + DIV_DDR_WIDTH, CLK_DIVIDER_ONE_BASED |
> + CLK_DIVIDER_ALLOW_ZERO, &_lock);
> clk_register_clkdev(clk, "ahb_clk_div", NULL);
> clk = clk_register_mux(NULL, "ahb_clk", ahb_parents,
> ARRAY_SIZE(ahb_parents),
> --
> 1.9.1
>
Ralf
^ permalink raw reply [flat|nested] 2+ messages in thread