Re: [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method

[Maxime Ripard <maxime.ripard@free-electrons.com>]

[-- Attachment #1: Type: text/plain, Size: 1352 bytes --]

On Fri, Jul 01, 2016 at 02:53:52AM +0200, Ondřej Jirman wrote:
> On 30.6.2016 22:40, Maxime Ripard wrote:
> > Hi,
> > 
> > On Sat, Jun 25, 2016 at 05:45:03AM +0200, megous@megous.com wrote:
> >> From: Ondrej Jirman <megous@megous.com>
> >>
> >> PLL1 on H3 requires special factors application algorithm,
> >> when the rate is changed. This algorithm was extracted
> >> from the arisc code that handles frequency scaling
> >> in the BSP kernel.
> >>
> >> This commit adds optional apply function to
> >> struct factors_data, that can implement non-trivial
> >> factors application method, when necessary.
> >>
> >> Also struct clk_factors_config is extended with position
> >> of the PLL lock flag.
> > 
> > Have you tested the current implementation, and found that it was not
> > working, or did you duplicate the arisc code directly?
> 
> Also of note is that similar code probably doesn't crash in u-boot,
> because there, before changing the PLL1 clock, the cpu is switched to
> 24MHz osc, so it is not overclocked, even if factors align in such a way
> that you'd get the behavior I described in the other email.

That's also something that we can do.

See Meson's clk-cpu clock notifiers for example.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]