From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Mark Brown <broonie@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, netdev@vger.kernel.org,
Corentin Labbe <clabbe.montjoie@gmail.com>,
Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH net-next v2 09/15] net: stmmac: dwmac-sun8i: Support different ranges for TX/RX delay chains
Date: Wed, 2 May 2018 00:12:21 +0800 [thread overview]
Message-ID: <20180501161227.2110-10-wens@csie.org> (raw)
In-Reply-To: <20180501161227.2110-1-wens@csie.org>
On the R40 SoC, the RX delay chain only has a range of 0~7 (hundred
picoseconds), instead of 0~31. Also the TX delay chain is completely
absent.
This patch adds support for different ranges by adding per-compatible
maximum values in the variant data. A maximum of 0 indicates that the
delay chain is not supported or absent.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
.../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 32 +++++++++++++------
1 file changed, 23 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 79e104a20e20..4f5612a3c855 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -47,6 +47,12 @@
* @support_mii: Does the MAC handle MII
* @support_rmii: Does the MAC handle RMII
* @support_rgmii: Does the MAC handle RGMII
+ *
+ * @rx_delay_max: Maximum raw value for RX delay chain
+ * @tx_delay_max: Maximum raw value for TX delay chain
+ * These two also indicate the bitmask for
+ * the RX and TX delay chain registers. A
+ * value of zero indicates this is not supported.
*/
struct emac_variant {
u32 default_syscon_value;
@@ -55,6 +61,8 @@ struct emac_variant {
bool support_mii;
bool support_rmii;
bool support_rgmii;
+ u8 rx_delay_max;
+ u8 tx_delay_max;
};
/* struct sunxi_priv_data - hold all sunxi private data
@@ -91,7 +99,9 @@ static const struct emac_variant emac_variant_h3 = {
.soc_has_internal_phy = true,
.support_mii = true,
.support_rmii = true,
- .support_rgmii = true
+ .support_rgmii = true,
+ .rx_delay_max = 31,
+ .tx_delay_max = 7,
};
static const struct emac_variant emac_variant_v3s = {
@@ -106,7 +116,9 @@ static const struct emac_variant emac_variant_a83t = {
.syscon_field = &sun8i_syscon_reg_field,
.soc_has_internal_phy = false,
.support_mii = true,
- .support_rgmii = true
+ .support_rgmii = true,
+ .rx_delay_max = 31,
+ .tx_delay_max = 7,
};
static const struct emac_variant emac_variant_a64 = {
@@ -115,7 +127,9 @@ static const struct emac_variant emac_variant_a64 = {
.soc_has_internal_phy = false,
.support_mii = true,
.support_rmii = true,
- .support_rgmii = true
+ .support_rgmii = true,
+ .rx_delay_max = 31,
+ .tx_delay_max = 7,
};
#define EMAC_BASIC_CTL0 0x00
@@ -219,9 +233,7 @@ static const struct emac_variant emac_variant_a64 = {
#define SYSCON_RMII_EN BIT(13) /* 1: enable RMII (overrides EPIT) */
/* Generic system control EMAC_CLK bits */
-#define SYSCON_ETXDC_MASK GENMASK(2, 0)
#define SYSCON_ETXDC_SHIFT 10
-#define SYSCON_ERXDC_MASK GENMASK(4, 0)
#define SYSCON_ERXDC_SHIFT 5
/* EMAC PHY Interface Type */
#define SYSCON_EPIT BIT(2) /* 1: RGMII, 0: MII */
@@ -847,8 +859,9 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
}
val /= 100;
dev_dbg(priv->device, "set tx-delay to %x\n", val);
- if (val <= SYSCON_ETXDC_MASK) {
- reg &= ~(SYSCON_ETXDC_MASK << SYSCON_ETXDC_SHIFT);
+ if (val <= gmac->variant->tx_delay_max) {
+ reg &= ~(gmac->variant->tx_delay_max <<
+ SYSCON_ETXDC_SHIFT);
reg |= (val << SYSCON_ETXDC_SHIFT);
} else {
dev_err(priv->device, "Invalid TX clock delay: %d\n",
@@ -864,8 +877,9 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
}
val /= 100;
dev_dbg(priv->device, "set rx-delay to %x\n", val);
- if (val <= SYSCON_ERXDC_MASK) {
- reg &= ~(SYSCON_ERXDC_MASK << SYSCON_ERXDC_SHIFT);
+ if (val <= gmac->variant->rx_delay_max) {
+ reg &= ~(gmac->variant->rx_delay_max <<
+ SYSCON_ERXDC_SHIFT);
reg |= (val << SYSCON_ERXDC_SHIFT);
} else {
dev_err(priv->device, "Invalid RX clock delay: %d\n",
--
2.17.0
next prev parent reply other threads:[~2018-05-01 16:12 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-01 16:12 [PATCH net-next v2 00/15] ARM: sun8i: r40: Add Ethernet support Chen-Yu Tsai
2018-05-01 16:12 ` [PATCH net-next v2 01/15] clk: sunxi-ng: r40: rewrite init code to a platform driver Chen-Yu Tsai
2018-05-01 16:12 ` [PATCH net-next v2 02/15] clk: sunxi-ng: r40: export a regmap to access the GMAC register Chen-Yu Tsai
2018-05-01 16:12 ` [PATCH net-next v2 03/15] dt-bindings: net: dwmac-sun8i: Clean up clock delay chain descriptions Chen-Yu Tsai
2018-05-01 16:26 ` Rob Herring
2018-05-01 16:12 ` [PATCH net-next v2 04/15] dt-bindings: net: dwmac-sun8i: Sort syscon compatibles by alphabetical order Chen-Yu Tsai
2018-05-01 16:12 ` [PATCH net-next v2 05/15] dt-bindings: net: dwmac-sun8i: simplify description of syscon property Chen-Yu Tsai
2018-05-01 16:27 ` Rob Herring
2018-05-01 16:12 ` [PATCH net-next v2 06/15] dt-bindings: net: dwmac-sun8i: Add binding for GMAC on Allwinner R40 SoC Chen-Yu Tsai
2018-05-01 16:28 ` Rob Herring
2018-05-01 16:12 ` [PATCH net-next v2 07/15] net: stmmac: dwmac-sun8i: Use regmap_field for syscon register access Chen-Yu Tsai
2018-05-01 16:12 ` [PATCH net-next v2 08/15] net: stmmac: dwmac-sun8i: Allow getting syscon regmap from external device Chen-Yu Tsai
2018-05-01 16:12 ` Chen-Yu Tsai [this message]
2018-05-01 16:12 ` [PATCH net-next v2 10/15] net: stmmac: dwmac-sun8i: Add support for GMAC on Allwinner R40 SoC Chen-Yu Tsai
2018-05-01 16:12 ` [PATCH net-next v2 11/15] ARM: dts: sun8i: r40: bananapi-m2-ultra: Sort device node dereferences Chen-Yu Tsai
2018-05-01 16:12 ` [PATCH net-next v2 12/15] ARM: dts: sun8i: r40: Add device node and RGMII pinmux node for GMAC Chen-Yu Tsai
2018-05-01 16:12 ` [PATCH net-next v2 13/15] ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable GMAC ethernet controller Chen-Yu Tsai
2018-05-01 16:12 ` [PATCH net-next v2 14/15] soc: sunxi: export a regmap for EMAC clock reg on A64 Chen-Yu Tsai
2018-05-01 16:12 ` [PATCH net-next v2 15/15] arm64: dts: allwinner: a64: add SRAM controller device tree node Chen-Yu Tsai
2018-05-02 9:51 ` Maxime Ripard
2018-05-02 9:53 ` Chen-Yu Tsai
2018-05-02 10:19 ` Icenowy Zheng
2018-05-02 11:54 ` Maxime Ripard
2018-05-13 19:37 ` Chen-Yu Tsai
2018-05-14 8:03 ` Maxime Ripard
2018-05-16 6:47 ` Chen-Yu Tsai
2018-05-16 13:31 ` Maxime Ripard
2018-05-01 16:33 ` [PATCH net-next v2 00/15] ARM: sun8i: r40: Add Ethernet support Chen-Yu Tsai
2018-05-02 15:06 ` David Miller
2018-05-03 13:12 ` Maxime Ripard
2018-05-03 18:40 ` David Miller
2018-05-04 15:03 ` Maxime Ripard
2018-05-02 15:04 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180501161227.2110-10-wens@csie.org \
--to=wens@csie.org \
--cc=broonie@kernel.org \
--cc=clabbe.montjoie@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=mturquette@baylibre.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox