Re: [PATCH v2 4/6] clk: tegra20: init NDFLASH clock to sensible rate

[Peter De Schrijver <pdeschrijver@nvidia.com>]

On Sun, May 27, 2018 at 11:54:40PM +0200, Stefan Agner wrote:
> From: Lucas Stach <dev@lynxeye.de>
> 
> Set up the NAND Flash controller clock to run at 150MHz
> instead of the rate set by the bootloader. This is a
> conservative rate which also yields good performance.
> 
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
>  drivers/clk/tegra/clk-tegra20.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
> index 0ee56dd04cec..dff8c425cd28 100644
> --- a/drivers/clk/tegra/clk-tegra20.c
> +++ b/drivers/clk/tegra/clk-tegra20.c
> @@ -1049,6 +1049,7 @@ static struct tegra_clk_init_table init_table[] __initdata = {
>  	{ TEGRA20_CLK_GR2D, TEGRA20_CLK_PLL_C, 300000000, 0 },
>  	{ TEGRA20_CLK_GR3D, TEGRA20_CLK_PLL_C, 300000000, 0 },
>  	{ TEGRA20_CLK_VDE, TEGRA20_CLK_CLK_MAX, 300000000, 0 },
> +	{ TEGRA20_CLK_NDFLASH, TEGRA20_CLK_PLL_P, 150000000, 0 },
>  	/* must be the last entry */
>  	{ TEGRA20_CLK_CLK_MAX, TEGRA20_CLK_CLK_MAX, 0, 0 },
>  };
> -- 
> 2.17.0
> 

Maybe better to specify this in the Tegra20 dtsi? See 
"Assigned clock parents and rates" in Documentation/devicetree/bindings/clock/clock-bindings.txt

Peter.