From: Paul Cercueil <paul@crapouillou.net>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Thierry Reding <thierry.reding@gmail.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>,
Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paul.burton@mips.com>,
James Hogan <jhogan@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
Lee Jones <lee.jones@linaro.org>,
Mathieu Malaterre <malat@debian.org>,
Ezequiel Garcia <ezequiel@collabora.co.uk>
Cc: linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org,
linux-mips@linux-mips.org, linux-doc@vger.kernel.org,
linux-clk@vger.kernel.org, Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v6 09/24] watchdog: jz4740: Use regmap provided by TCU driver
Date: Thu, 9 Aug 2018 23:43:59 +0200 [thread overview]
Message-ID: <20180809214414.20905-10-paul@crapouillou.net> (raw)
In-Reply-To: <20180809214414.20905-1-paul@crapouillou.net>
Since we broke the ABI by changing the clock, the driver was also
updated to use the regmap provided by the TCU driver.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
drivers/watchdog/jz4740_wdt.c | 30 ++++++++++++++----------------
1 file changed, 14 insertions(+), 16 deletions(-)
v6: New patch
diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
index 1d504ecf45e1..0f54306aee25 100644
--- a/drivers/watchdog/jz4740_wdt.c
+++ b/drivers/watchdog/jz4740_wdt.c
@@ -13,6 +13,7 @@
*
*/
+#include <linux/mfd/ingenic-tcu.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
@@ -25,10 +26,7 @@
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/of.h>
-
-#define JZ_REG_WDT_TIMER_DATA 0x0
-#define JZ_REG_WDT_COUNTER_ENABLE 0x4
-#define JZ_REG_WDT_TIMER_COUNTER 0x8
+#include <linux/regmap.h>
#define DEFAULT_HEARTBEAT 5
#define MAX_HEARTBEAT 2048
@@ -48,7 +46,7 @@ MODULE_PARM_DESC(heartbeat,
struct jz4740_wdt_drvdata {
struct watchdog_device wdt;
- void __iomem *base;
+ struct regmap *map;
struct clk *clk;
unsigned long clk_rate;
};
@@ -57,7 +55,7 @@ static int jz4740_wdt_ping(struct watchdog_device *wdt_dev)
{
struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
- writew(0x0, drvdata->base + JZ_REG_WDT_TIMER_COUNTER);
+ regmap_write(drvdata->map, TCU_REG_WDT_TCNT, 0);
return 0;
}
@@ -67,12 +65,12 @@ static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev,
struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
u16 timeout_value = (u16)(drvdata->clk_rate * new_timeout);
- writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
+ regmap_write(drvdata->map, TCU_REG_WDT_TCER, 0);
- writew((u16)timeout_value, drvdata->base + JZ_REG_WDT_TIMER_DATA);
- writew(0x0, drvdata->base + JZ_REG_WDT_TIMER_COUNTER);
+ regmap_write(drvdata->map, TCU_REG_WDT_TDR, timeout_value);
+ regmap_write(drvdata->map, TCU_REG_WDT_TCNT, 0);
- writeb(0x1, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
+ regmap_write(drvdata->map, TCU_REG_WDT_TCER, TCU_WDT_TCER_TCEN);
wdt_dev->timeout = new_timeout;
return 0;
@@ -96,7 +94,7 @@ static int jz4740_wdt_stop(struct watchdog_device *wdt_dev)
{
struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
- writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
+ regmap_write(drvdata->map, TCU_REG_WDT_TCER, 0);
clk_disable_unprepare(drvdata->clk);
return 0;
@@ -138,7 +136,6 @@ static int jz4740_wdt_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct jz4740_wdt_drvdata *drvdata;
struct watchdog_device *jz4740_wdt;
- struct resource *res;
long rate;
int ret;
@@ -174,10 +171,11 @@ static int jz4740_wdt_probe(struct platform_device *pdev)
watchdog_set_nowayout(jz4740_wdt, nowayout);
watchdog_set_drvdata(jz4740_wdt, drvdata);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- drvdata->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(drvdata->base))
- return PTR_ERR(drvdata->base);
+ drvdata->map = dev_get_regmap(dev->parent, NULL);
+ if (!drvdata->map) {
+ dev_err(dev, "regmap not found\n");
+ return -EINVAL;
+ }
ret = devm_watchdog_register_device(&pdev->dev, &drvdata->wdt);
if (ret < 0)
--
2.11.0
next prev parent reply other threads:[~2018-08-10 0:11 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-09 21:43 [PATCH v6 00/24] Ingenic TCU patchset v6 Paul Cercueil
2018-08-09 21:43 ` [PATCH v6 01/24] mfd: Add ingenic-tcu.h header Paul Cercueil
2018-08-09 21:43 ` [PATCH v6 02/24] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2018-08-09 21:43 ` [PATCH v6 03/24] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
2018-08-09 21:43 ` [PATCH v6 04/24] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
2018-08-13 15:24 ` Rob Herring
2018-08-09 21:43 ` [PATCH v6 05/24] clocksource: Add a new timer-ingenic driver Paul Cercueil
2018-08-09 21:43 ` [PATCH v6 06/24] clocksource: Add driver for the Ingenic JZ47xx OST Paul Cercueil
2018-08-14 9:42 ` Mathieu Malaterre
2018-08-16 16:07 ` Paul Cercueil
2018-08-09 21:43 ` [PATCH v6 07/24] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
2018-08-09 21:43 ` [PATCH v6 08/24] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
2018-08-10 13:36 ` Guenter Roeck
2018-08-09 21:43 ` Paul Cercueil [this message]
2018-08-10 13:37 ` [PATCH v6 09/24] watchdog: jz4740: Use regmap " Guenter Roeck
2018-08-09 21:44 ` [PATCH v6 10/24] watchdog: jz4740: Avoid starting watchdog in set_timeout Paul Cercueil
2018-08-10 13:37 ` Guenter Roeck
2018-08-09 21:44 ` [PATCH v6 11/24] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST Paul Cercueil
2018-08-10 13:38 ` Guenter Roeck
2018-08-09 21:44 ` [PATCH v6 12/24] pwm: jz4740: Use regmap and clocks from TCU driver Paul Cercueil
2018-08-09 21:44 ` [PATCH v6 13/24] pwm: jz4740: Allow selection of PWM channels 0 and 1 Paul Cercueil
2018-08-09 21:44 ` [PATCH v6 14/24] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST Paul Cercueil
2018-08-09 21:44 ` [PATCH v6 15/24] pwm: jz4740: Remove unused devicetree compatible strings Paul Cercueil
2018-08-09 21:44 ` [PATCH v6 16/24] pwm: jz4740: Add support for the JZ4725B Paul Cercueil
2018-08-09 21:44 ` [PATCH v6 17/24] clk: jz4740: Add TCU clock Paul Cercueil
2018-08-09 21:44 ` [PATCH v6 18/24] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set Paul Cercueil
2018-08-09 21:44 ` [PATCH v6 19/24] MIPS: jz4740: Add DTS nodes for the TCU drivers Paul Cercueil
2018-08-09 21:44 ` [PATCH v6 20/24] MIPS: qi_lb60: Move PWM devices to devicetree Paul Cercueil
2018-08-09 21:46 ` [PATCH v6 21/24] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2018-08-09 21:46 ` [PATCH v6 22/24] MIPS: CI20: Reduce system timer and clocksource to 3 MHz Paul Cercueil
2018-08-09 21:47 ` [PATCH v6 23/24] MIPS: CI20: defconfig: enable OST driver Paul Cercueil
2018-08-09 21:48 ` [PATCH v6 24/24] MIPS: jz4740: Drop obsolete code Paul Cercueil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180809214414.20905-10-paul@crapouillou.net \
--to=paul@crapouillou.net \
--cc=corbet@lwn.net \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel@collabora.co.uk \
--cc=jhogan@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=malat@debian.org \
--cc=mark.rutland@arm.com \
--cc=paul.burton@mips.com \
--cc=ralf@linux-mips.org \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox