Re: [PATCH v3 13/14] arm64: dts: qcom: qcs404: Add DVFS support

Niklas Cassel
2019-06-26T09:09:10Z

I actually think that it makes sense to squash this patch with the
[PATCH v3 10/14] arm64: dts: qcom: qcs404: Add OPP table
patch.

But that might be a personal preference.

Either way, I think this series in ready for the real mailing list.

On Tue, 25 Jun 2019 at 18:48, Jorge Ramirez-Ortiz
<jorge.ramirez-ortiz@linaro.org> wrote:
>
> Support dynamic voltage and frequency scaling on qcs404.
>
> Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/qcs404.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index 9569686dbc41..4b4ce0b5df76 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -34,6 +34,9 @@
> enable-method = "psci";
> cpu-idle-states = <&CPU_SLEEP_0>;
> next-level-cache = <&L2_0>;
> + clocks = <&apcs_glb>;
> + operating-points-v2 = <&cpu_opp_table>;
> + cpu-supply = <&pms405_s3>;
> };
>
> CPU1: cpu@101 {
> @@ -43,6 +46,9 @@
> enable-method = "psci";
> cpu-idle-states = <&CPU_SLEEP_0>;
> next-level-cache = <&L2_0>;
> + clocks = <&apcs_glb>;
> + operating-points-v2 = <&cpu_opp_table>;
> + cpu-supply = <&pms405_s3>;
> };
>
> CPU2: cpu@102 {
> @@ -52,6 +58,9 @@
> enable-method = "psci";
> cpu-idle-states = <&CPU_SLEEP_0>;
> next-level-cache = <&L2_0>;
> + clocks = <&apcs_glb>;
> + operating-points-v2 = <&cpu_opp_table>;
> + cpu-supply = <&pms405_s3>;
> };
>
> CPU3: cpu@103 {
> @@ -61,6 +70,9 @@
> enable-method = "psci";
> cpu-idle-states = <&CPU_SLEEP_0>;
> next-level-cache = <&L2_0>;
> + clocks = <&apcs_glb>;
> + operating-points-v2 = <&cpu_opp_table>;
> + cpu-supply = <&pms405_s3>;
> };
>
> L2_0: l2-cache {
> --
> 2.21.0
>