From: Stephen Boyd <sboyd@kernel.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Vinod Koul <vkoul@kernel.org>, Andy Gross <agross@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] clk: qcom: gcc: Add missing clocks in SM8150
Date: Tue, 17 Sep 2019 09:09:59 -0700 [thread overview]
Message-ID: <20190917161000.DAFF3206C2@mail.kernel.org> (raw)
In-Reply-To: <20190917091623.3453-1-vkoul@kernel.org>
Quoting Vinod Koul (2019-09-17 02:16:23)
> The initial upstreaming of SM8150 GCC driver missed few clock so add
> them up now.
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
Should have some sort of fixes tag?
> drivers/clk/qcom/gcc-sm8150.c | 172 ++++++++++++++++++++++++++++++++++
> 1 file changed, 172 insertions(+)
>
> diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
> index 12ca2d14797f..13d4d14a5744 100644
> --- a/drivers/clk/qcom/gcc-sm8150.c
> +++ b/drivers/clk/qcom/gcc-sm8150.c
> @@ -1616,6 +1616,38 @@ static struct clk_branch gcc_gpu_cfg_ahb_clk = {
> },
> };
>
> +static struct clk_branch gcc_gpu_gpll0_clk_src = {
> + .halt_check = BRANCH_HALT_SKIP,
Why skip?
> + .clkr = {
> + .enable_reg = 0x52004,
> + .enable_mask = BIT(15),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_gpu_gpll0_clk_src",
> + .parent_hws = (const struct clk_hw *[]){
> + &gpll0.clkr.hw },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +static struct clk_branch gcc_gpu_gpll0_div_clk_src = {
> + .halt_check = BRANCH_HALT_SKIP,
Why skip?
> + .clkr = {
> + .enable_reg = 0x52004,
> + .enable_mask = BIT(16),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_gpu_gpll0_div_clk_src",
> + .parent_hws = (const struct clk_hw *[]){
> + &gcc_gpu_gpll0_clk_src.clkr.hw },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> static struct clk_branch gcc_gpu_iref_clk = {
> .halt_reg = 0x8c010,
> .halt_check = BRANCH_HALT,
> @@ -1698,6 +1730,38 @@ static struct clk_branch gcc_npu_cfg_ahb_clk = {
> },
> };
>
> +static struct clk_branch gcc_npu_gpll0_clk_src = {
> + .halt_check = BRANCH_HALT_SKIP,
> + .clkr = {
> + .enable_reg = 0x52004,
> + .enable_mask = BIT(18),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_npu_gpll0_clk_src",
> + .parent_hws = (const struct clk_hw *[]){
> + &gpll0.clkr.hw },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +static struct clk_branch gcc_npu_gpll0_div_clk_src = {
> + .halt_check = BRANCH_HALT_SKIP,
> + .clkr = {
> + .enable_reg = 0x52004,
> + .enable_mask = BIT(19),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_npu_gpll0_div_clk_src",
> + .parent_hws = (const struct clk_hw *[]){
> + &gcc_npu_gpll0_clk_src.clkr.hw },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> static struct clk_branch gcc_npu_trig_clk = {
> .halt_reg = 0x4d00c,
> .halt_check = BRANCH_VOTED,
> @@ -2812,6 +2876,42 @@ static struct clk_branch gcc_ufs_card_phy_aux_hw_ctl_clk = {
> },
> };
>
> +static struct clk_branch gcc_ufs_card_rx_symbol_0_clk = {
> + .halt_check = BRANCH_HALT_SKIP,
Can't we fix the UFS driver to not require this anymore? This is the
fourth or fifth time I've asked for this.
> + .clkr = {
> + .enable_reg = 0x7501c,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_ufs_card_rx_symbol_0_clk",
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +static struct clk_branch gcc_ufs_card_rx_symbol_1_clk = {
> + .halt_check = BRANCH_HALT_SKIP,
> + .clkr = {
> + .enable_reg = 0x750ac,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_ufs_card_rx_symbol_1_clk",
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +static struct clk_branch gcc_ufs_card_tx_symbol_0_clk = {
> + .halt_check = BRANCH_HALT_SKIP,
> + .clkr = {
> + .enable_reg = 0x75018,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_ufs_card_tx_symbol_0_clk",
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> static struct clk_branch gcc_ufs_card_unipro_core_clk = {
> .halt_reg = 0x75058,
> .halt_check = BRANCH_HALT,
next prev parent reply other threads:[~2019-09-17 16:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-17 9:16 [PATCH] clk: qcom: gcc: Add missing clocks in SM8150 Vinod Koul
2019-09-17 16:09 ` Stephen Boyd [this message]
2019-10-16 12:23 ` Vinod Koul
2019-10-17 17:48 ` Stephen Boyd
2019-10-21 10:54 ` Vinod Koul
2019-10-27 21:25 ` Stephen Boyd
2019-10-28 7:23 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190917161000.DAFF3206C2@mail.kernel.org \
--to=sboyd@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).