Linux clock framework development
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@arndb.de>
To: Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Chanwoo Choi <cw00.choi@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linus.walleij@linaro.org,
	Arnd Bergmann <arnd@arndb.de>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Subject: [PATCH 01/36] ARM: samsung: make S3C24XX_MISCCR access indirect
Date: Thu, 10 Oct 2019 22:29:45 +0200	[thread overview]
Message-ID: <20191010203043.1241612-1-arnd@arndb.de> (raw)
In-Reply-To: <20191010202802.1132272-1-arnd@arndb.de>

The clk driver uses both a function call into an exported
platform file and a direct register access to a hardcoded
virtual address for accessing the MISCCR register, both
become are a problem for a multiplatform kernel because
of the header file dependency.

Make this an indirect function call through platform data
instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-s3c24xx/common.c         |  3 +++
 drivers/clk/samsung/clk-s3c2410-dclk.c | 10 ++++------
 2 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 3dc029c2d2cb..ebf6bde67816 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -667,5 +667,8 @@ struct platform_device s3c2410_device_dclk = {
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(s3c2410_dclk_resource),
 	.resource	= s3c2410_dclk_resource,
+	.dev		= {
+		.platform_data = s3c2410_modify_misccr,
+	},
 };
 #endif
diff --git a/drivers/clk/samsung/clk-s3c2410-dclk.c b/drivers/clk/samsung/clk-s3c2410-dclk.c
index 1281672cb00e..fbcec0252c45 100644
--- a/drivers/clk/samsung/clk-s3c2410-dclk.c
+++ b/drivers/clk/samsung/clk-s3c2410-dclk.c
@@ -14,10 +14,6 @@
 #include <linux/module.h>
 #include "clk.h"
 
-/* legacy access to misccr, until dt conversion is finished */
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-
 #define MUX_DCLK0	0
 #define MUX_DCLK1	1
 #define DIV_DCLK0	2
@@ -52,6 +48,7 @@ struct s3c24xx_clkout {
 	struct clk_hw		hw;
 	u32			mask;
 	u8			shift;
+	unsigned int (*modify_misccr)(unsigned int clr, unsigned int chg);
 };
 
 #define to_s3c24xx_clkout(_hw) container_of(_hw, struct s3c24xx_clkout, hw)
@@ -62,7 +59,7 @@ static u8 s3c24xx_clkout_get_parent(struct clk_hw *hw)
 	int num_parents = clk_hw_get_num_parents(hw);
 	u32 val;
 
-	val = readl_relaxed(S3C24XX_MISCCR) >> clkout->shift;
+	val = clkout->modify_misccr(0, 0) >> clkout->shift;
 	val >>= clkout->shift;
 	val &= clkout->mask;
 
@@ -76,7 +73,7 @@ static int s3c24xx_clkout_set_parent(struct clk_hw *hw, u8 index)
 {
 	struct s3c24xx_clkout *clkout = to_s3c24xx_clkout(hw);
 
-	s3c2410_modify_misccr((clkout->mask << clkout->shift),
+	clkout->modify_misccr((clkout->mask << clkout->shift),
 			      (index << clkout->shift));
 
 	return 0;
@@ -110,6 +107,7 @@ static struct clk_hw *s3c24xx_register_clkout(struct device *dev,
 	clkout->shift = shift;
 	clkout->mask = mask;
 	clkout->hw.init = &init;
+	clkout->modify_misccr = dev->platform_data;
 
 	ret = clk_hw_register(dev, &clkout->hw);
 	if (ret)
-- 
2.20.0


  reply	other threads:[~2019-10-10 20:30 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-10 20:28 [PATCH 00/36] ARM: samsung platform cleanup Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann [this message]
2019-10-15 14:52   ` [PATCH 01/36] ARM: samsung: make S3C24XX_MISCCR access indirect Tomasz Figa
2019-10-23 13:10 ` [PATCH 00/36] ARM: samsung platform cleanup Krzysztof Kozlowski
2019-10-23 13:39   ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191010203043.1241612-1-arnd@arndb.de \
    --to=arnd@arndb.de \
    --cc=cw00.choi@samsung.com \
    --cc=kgene@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=s.nawrocki@samsung.com \
    --cc=sboyd@kernel.org \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox