Re: [PATCH v2 05/10] media: adv748x: add support for HDMI audio

[Alex Riesen <alexander.riesen@cetitec.com>]

Hi Geert,

Geert Uytterhoeven, Fri, Mar 20, 2020 09:43:29 +0100:
> CC linux-clk for the clock provider.
> 
> On Thu, Mar 19, 2020 at 6:42 PM Alex Riesen <alexander.riesen@cetitec.com> wrote:
> > This adds an implemention of SoC DAI driver which provides access to the
> > I2S port of the device.

I just noticed I don't do clk_prepare_enable anywhere.
Shouldn't the clock master enable its clocks somewhere?

> > diff --git a/drivers/media/i2c/adv748x/adv748x-dai.c b/drivers/media/i2c/adv748x/adv748x-dai.c
> > new file mode 100644
> > index 000000000000..4775a0c7ed7f
> > --- /dev/null
> > +++ b/drivers/media/i2c/adv748x/adv748x-dai.c
...
> > +static int adv748x_dai_startup(struct snd_pcm_substream *sub, struct snd_soc_dai *dai)
> > +{
> > +       struct adv748x_state *state = state_of(dai);
> > +
> > +       if (sub->stream != SNDRV_PCM_STREAM_CAPTURE)
> > +               return -EINVAL;
> > +       return set_audio_pads_state(state, 1);
> > +}

For example, here, after activation of the lines succeeded?

> > +static void adv748x_dai_shutdown(struct snd_pcm_substream *sub, struct snd_soc_dai *dai)
> > +{
> > +       struct adv748x_state *state = state_of(dai);
> > +
> > +       set_audio_pads_state(state, 0);
> > +}

And clk_disable_unprepare here, before shutting down the pads?

Regards,
Alex