From: "Pali Rohár" <pali@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: "Marek Behún" <kabel@kernel.org>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
"Terry Zhou" <bjzhou@marvell.com>,
"Konstantin Porotchkin" <kostap@marvell.com>
Subject: Re: [PATCH] clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
Date: Fri, 13 Nov 2020 11:19:19 +0100 [thread overview]
Message-ID: <20201113101919.wega756egs7dinth@pali> (raw)
In-Reply-To: <20201106115118.43eab492@kernel.org>
Michael, Stephen: Could you take this clk patch?
On Friday 06 November 2020 11:51:18 Marek Behún wrote:
> Also, this is how A3720 WTMI code and ATF determines XTAL clock rate.
> No reason for kernel to do it differently.
>
> Reviewed-by: Marek Behún <kabel@kernel.org>
>
> On Fri, 6 Nov 2020 11:00:39 +0100
> Pali Rohár <pali@kernel.org> wrote:
>
> > From: Terry Zhou <bjzhou@marvell.com>
> >
> > There is an error in the current code that the XTAL MODE
> > pin was set to NB MPP1_31 which should be NB MPP1_9.
> > The latch register of NB MPP1_9 has different offset of 0x8.
> >
> > Signed-off-by: Terry Zhou <bjzhou@marvell.com>
> > [pali: Fix pin name in commit message]
> > Signed-off-by: Pali Rohár <pali@kernel.org>
> > Fixes: 7ea8250406a6 ("clk: mvebu: Add the xtal clock for Armada 3700 SoC")
> > Cc: stable@vger.kernel.org
> >
> > ---
> > This patch is present in Marvell SDK and also in Marvell's kernel fork:
> > https://github.com/MarvellEmbeddedProcessors/linux-marvell/commit/80d4cec4cef8282e5ac3aaf98ce3e68fb299a134
> >
> > Konstantin Porotchkin wrote on Github that Gregory Clement was notified
> > about this patch, but as this patch is still not in mainline kernel I'm
> > sending it again for review.
> >
> > In original commit message (only in commit message, not code) was
> > specified MPP9 pin on South Bridge, but correct is North Bridge.
> > ---
> > drivers/clk/mvebu/armada-37xx-xtal.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/clk/mvebu/armada-37xx-xtal.c b/drivers/clk/mvebu/armada-37xx-xtal.c
> > index e9e306d4e9af..41271351cf1f 100644
> > --- a/drivers/clk/mvebu/armada-37xx-xtal.c
> > +++ b/drivers/clk/mvebu/armada-37xx-xtal.c
> > @@ -13,8 +13,8 @@
> > #include <linux/platform_device.h>
> > #include <linux/regmap.h>
> >
> > -#define NB_GPIO1_LATCH 0xC
> > -#define XTAL_MODE BIT(31)
> > +#define NB_GPIO1_LATCH 0x8
> > +#define XTAL_MODE BIT(9)
> >
> > static int armada_3700_xtal_clock_probe(struct platform_device *pdev)
> > {
>
next prev parent reply other threads:[~2020-11-13 10:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-06 10:00 [PATCH] clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 Pali Rohár
2020-11-06 10:51 ` Marek Behún
2020-11-13 10:19 ` Pali Rohár [this message]
2020-12-01 9:46 ` Pali Rohár
2020-12-19 23:51 ` Stephen Boyd
2020-12-20 16:21 ` Pali Rohár
2020-12-21 1:47 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201113101919.wega756egs7dinth@pali \
--to=pali@kernel.org \
--cc=bjzhou@marvell.com \
--cc=gregory.clement@bootlin.com \
--cc=kabel@kernel.org \
--cc=kostap@marvell.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox