[PATCH v3 0/6] Couple improvements for Tegra clk driver

[PATCH v3 0/6] Couple improvements for Tegra clk driver

[Dmitry Osipenko]

This series fixes couple minor standalone problems of the Tegra clk
driver.

Changelog:

v3: - Added acks from Thierry Reding that he gave to v2.

    - Added new patch "clk: tegra: Don't allow zero clock rate for PLLs".

v2: - Added these new patches:

      clk: tegra: Halve SCLK rate on Tegra20
      MAINTAINERS: Hand Tegra clk driver to Jon and Thierry

v1: - Collected clk patches into a single series.

Dmitry Osipenko (6):
  clk: tegra30: Use 300MHz for video decoder by default
  clk: tegra: Fix refcounting of gate clocks
  clk: tegra: Ensure that PLLU configuration is applied properly
  clk: tegra: Halve SCLK rate on Tegra20
  MAINTAINERS: Hand Tegra clk driver to Jon and Thierry
  clk: tegra: Don't allow zero clock rate for PLLs

 CREDITS                             |  6 +++
 MAINTAINERS                         |  4 +-
 drivers/clk/tegra/clk-periph-gate.c | 72 +++++++++++++++++++----------
 drivers/clk/tegra/clk-periph.c      | 11 +++++
 drivers/clk/tegra/clk-pll.c         | 12 +++--
 drivers/clk/tegra/clk-tegra20.c     |  6 +--
 drivers/clk/tegra/clk-tegra30.c     |  2 +-
 7 files changed, 77 insertions(+), 36 deletions(-)

-- 
2.29.2

[PATCH v3 1/6] clk: tegra30: Use 300MHz for video decoder by default

[Dmitry Osipenko]

The 600MHz is a too high clock rate for some SoC versions for the video
decoder hardware and this may cause stability issues. Use 300MHz for the
video decoder by default, which is supported by all hardware versions.

Fixes: ed1a2459e20c ("clk: tegra: Add Tegra20/30 EMC clock implementation")
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-tegra30.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 16dbf83d2f62..a33688b2359e 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -1245,7 +1245,7 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA30_CLK_GR3D, TEGRA30_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA30_CLK_GR3D2, TEGRA30_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA30_CLK_PLL_U, TEGRA30_CLK_CLK_MAX, 480000000, 0 },
-	{ TEGRA30_CLK_VDE, TEGRA30_CLK_PLL_C, 600000000, 0 },
+	{ TEGRA30_CLK_VDE, TEGRA30_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA30_CLK_SPDIF_IN_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
 	{ TEGRA30_CLK_I2S0_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
 	{ TEGRA30_CLK_I2S1_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
-- 
2.29.2

[PATCH v3 2/6] clk: tegra: Fix refcounting of gate clocks

[Dmitry Osipenko]

The refcounting of the gate clocks has a bug causing the enable_refcnt
to underflow when unused clocks are disabled. This happens because clk
provider erroneously bumps the refcount if clock is enabled at a boot
time, which it shouldn't be doing, and it does this only for the gate
clocks, while peripheral clocks are using the same gate ops and the
peripheral clocks are missing the initial bump. Hence the refcount of
the peripheral clocks is 0 when unused clocks are disabled and then the
counter is decremented further by the gate ops, causing the integer
underflow.

Fix this problem by removing the erroneous bump and by implementing the
disable_unused() callback, which disables the unused gates properly.

The visible effect of the bug is such that the unused clocks are never
gated if a loaded kernel module grabs the unused clocks and starts to use
them. In practice this shouldn't cause any real problems for the drivers
and boards supported by the kernel today.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-periph-gate.c | 72 +++++++++++++++++++----------
 drivers/clk/tegra/clk-periph.c      | 11 +++++
 2 files changed, 58 insertions(+), 25 deletions(-)

diff --git a/drivers/clk/tegra/clk-periph-gate.c b/drivers/clk/tegra/clk-periph-gate.c
index 4b31beefc9fc..3c4259fec82e 100644
--- a/drivers/clk/tegra/clk-periph-gate.c
+++ b/drivers/clk/tegra/clk-periph-gate.c
@@ -48,18 +48,9 @@ static int clk_periph_is_enabled(struct clk_hw *hw)
 	return state;
 }
 
-static int clk_periph_enable(struct clk_hw *hw)
+static void clk_periph_enable_locked(struct clk_hw *hw)
 {
 	struct tegra_clk_periph_gate *gate = to_clk_periph_gate(hw);
-	unsigned long flags = 0;
-
-	spin_lock_irqsave(&periph_ref_lock, flags);
-
-	gate->enable_refcnt[gate->clk_num]++;
-	if (gate->enable_refcnt[gate->clk_num] > 1) {
-		spin_unlock_irqrestore(&periph_ref_lock, flags);
-		return 0;
-	}
 
 	write_enb_set(periph_clk_to_bit(gate), gate);
 	udelay(2);
@@ -78,6 +69,32 @@ static int clk_periph_enable(struct clk_hw *hw)
 		udelay(1);
 		writel_relaxed(0, gate->clk_base + LVL2_CLK_GATE_OVRE);
 	}
+}
+
+static void clk_periph_disable_locked(struct clk_hw *hw)
+{
+	struct tegra_clk_periph_gate *gate = to_clk_periph_gate(hw);
+
+	/*
+	 * If peripheral is in the APB bus then read the APB bus to
+	 * flush the write operation in apb bus. This will avoid the
+	 * peripheral access after disabling clock
+	 */
+	if (gate->flags & TEGRA_PERIPH_ON_APB)
+		tegra_read_chipid();
+
+	write_enb_clr(periph_clk_to_bit(gate), gate);
+}
+
+static int clk_periph_enable(struct clk_hw *hw)
+{
+	struct tegra_clk_periph_gate *gate = to_clk_periph_gate(hw);
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&periph_ref_lock, flags);
+
+	if (!gate->enable_refcnt[gate->clk_num]++)
+		clk_periph_enable_locked(hw);
 
 	spin_unlock_irqrestore(&periph_ref_lock, flags);
 
@@ -91,21 +108,28 @@ static void clk_periph_disable(struct clk_hw *hw)
 
 	spin_lock_irqsave(&periph_ref_lock, flags);
 
-	gate->enable_refcnt[gate->clk_num]--;
-	if (gate->enable_refcnt[gate->clk_num] > 0) {
-		spin_unlock_irqrestore(&periph_ref_lock, flags);
-		return;
-	}
+	WARN_ON(!gate->enable_refcnt[gate->clk_num]);
+
+	if (gate->enable_refcnt[gate->clk_num]-- == 1)
+		clk_periph_disable_locked(hw);
+
+	spin_unlock_irqrestore(&periph_ref_lock, flags);
+}
+
+static void clk_periph_disable_unused(struct clk_hw *hw)
+{
+	struct tegra_clk_periph_gate *gate = to_clk_periph_gate(hw);
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&periph_ref_lock, flags);
 
 	/*
-	 * If peripheral is in the APB bus then read the APB bus to
-	 * flush the write operation in apb bus. This will avoid the
-	 * peripheral access after disabling clock
+	 * Some clocks are duplicated and some of them are marked as critical,
+	 * like fuse and fuse_burn for example, thus the enable_refcnt will
+	 * be non-zero here id the "unused" duplicate is disabled by CCF.
 	 */
-	if (gate->flags & TEGRA_PERIPH_ON_APB)
-		tegra_read_chipid();
-
-	write_enb_clr(periph_clk_to_bit(gate), gate);
+	if (!gate->enable_refcnt[gate->clk_num])
+		clk_periph_disable_locked(hw);
 
 	spin_unlock_irqrestore(&periph_ref_lock, flags);
 }
@@ -114,6 +138,7 @@ const struct clk_ops tegra_clk_periph_gate_ops = {
 	.is_enabled = clk_periph_is_enabled,
 	.enable = clk_periph_enable,
 	.disable = clk_periph_disable,
+	.disable_unused = clk_periph_disable_unused,
 };
 
 struct clk *tegra_clk_register_periph_gate(const char *name,
@@ -148,9 +173,6 @@ struct clk *tegra_clk_register_periph_gate(const char *name,
 	gate->enable_refcnt = enable_refcnt;
 	gate->regs = pregs;
 
-	if (read_enb(gate) & periph_clk_to_bit(gate))
-		enable_refcnt[clk_num]++;
-
 	/* Data in .init is copied by clk_register(), so stack variable OK */
 	gate->hw.init = &init;
 
diff --git a/drivers/clk/tegra/clk-periph.c b/drivers/clk/tegra/clk-periph.c
index 67620c7ecd9e..79ca3aa072b7 100644
--- a/drivers/clk/tegra/clk-periph.c
+++ b/drivers/clk/tegra/clk-periph.c
@@ -100,6 +100,15 @@ static void clk_periph_disable(struct clk_hw *hw)
 	gate_ops->disable(gate_hw);
 }
 
+static void clk_periph_disable_unused(struct clk_hw *hw)
+{
+	struct tegra_clk_periph *periph = to_clk_periph(hw);
+	const struct clk_ops *gate_ops = periph->gate_ops;
+	struct clk_hw *gate_hw = &periph->gate.hw;
+
+	gate_ops->disable_unused(gate_hw);
+}
+
 static void clk_periph_restore_context(struct clk_hw *hw)
 {
 	struct tegra_clk_periph *periph = to_clk_periph(hw);
@@ -126,6 +135,7 @@ const struct clk_ops tegra_clk_periph_ops = {
 	.is_enabled = clk_periph_is_enabled,
 	.enable = clk_periph_enable,
 	.disable = clk_periph_disable,
+	.disable_unused = clk_periph_disable_unused,
 	.restore_context = clk_periph_restore_context,
 };
 
@@ -135,6 +145,7 @@ static const struct clk_ops tegra_clk_periph_nodiv_ops = {
 	.is_enabled = clk_periph_is_enabled,
 	.enable = clk_periph_enable,
 	.disable = clk_periph_disable,
+	.disable_unused = clk_periph_disable_unused,
 	.restore_context = clk_periph_restore_context,
 };
 
-- 
2.29.2

[PATCH v3 3/6] clk: tegra: Ensure that PLLU configuration is applied properly

[Dmitry Osipenko]

The PLLU (USB) consists of the PLL configuration itself and configuration
of the PLLU outputs. The PLLU programming is inconsistent on T30 vs T114,
where T114 immediately bails out if PLLU is enabled and T30 re-enables
a potentially already enabled PLL (left after bootloader) and then fully
reprograms it, which could be unsafe to do. The correct way should be to
skip enabling of the PLL if it's already enabled and then apply
configuration to the outputs. This patch doesn't fix any known problems,
it's a minor improvement.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-pll.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index c5cc0a2dac6f..d709ecb7d8d7 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -1131,7 +1131,8 @@ static int clk_pllu_enable(struct clk_hw *hw)
 	if (pll->lock)
 		spin_lock_irqsave(pll->lock, flags);
 
-	_clk_pll_enable(hw);
+	if (!clk_pll_is_enabled(hw))
+		_clk_pll_enable(hw);
 
 	ret = clk_pll_wait_for_lock(pll);
 	if (ret < 0)
@@ -1748,15 +1749,13 @@ static int clk_pllu_tegra114_enable(struct clk_hw *hw)
 		return -EINVAL;
 	}
 
-	if (clk_pll_is_enabled(hw))
-		return 0;
-
 	input_rate = clk_hw_get_rate(__clk_get_hw(osc));
 
 	if (pll->lock)
 		spin_lock_irqsave(pll->lock, flags);
 
-	_clk_pll_enable(hw);
+	if (!clk_pll_is_enabled(hw))
+		_clk_pll_enable(hw);
 
 	ret = clk_pll_wait_for_lock(pll);
 	if (ret < 0)
-- 
2.29.2

[PATCH v3 4/6] clk: tegra: Halve SCLK rate on Tegra20

[Dmitry Osipenko]

Higher SCLK rates on Tegra20 require high core voltage. The higher
clock rate may have a positive performance effect only for AHB DMA
transfers and AVP CPU, but both aren't used by upstream kernel at all.
Halve SCLK rate on Tegra20 in order to remove the high core voltage
requirement.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-tegra20.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 3efc651b42e3..3664593a5ba4 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -1021,9 +1021,9 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA20_CLK_PLL_P_OUT3, TEGRA20_CLK_CLK_MAX, 72000000, 1 },
 	{ TEGRA20_CLK_PLL_P_OUT4, TEGRA20_CLK_CLK_MAX, 24000000, 1 },
 	{ TEGRA20_CLK_PLL_C, TEGRA20_CLK_CLK_MAX, 600000000, 0 },
-	{ TEGRA20_CLK_PLL_C_OUT1, TEGRA20_CLK_CLK_MAX, 240000000, 0 },
-	{ TEGRA20_CLK_SCLK, TEGRA20_CLK_PLL_C_OUT1, 240000000, 0 },
-	{ TEGRA20_CLK_HCLK, TEGRA20_CLK_CLK_MAX, 240000000, 0 },
+	{ TEGRA20_CLK_PLL_C_OUT1, TEGRA20_CLK_CLK_MAX, 120000000, 0 },
+	{ TEGRA20_CLK_SCLK, TEGRA20_CLK_PLL_C_OUT1, 120000000, 0 },
+	{ TEGRA20_CLK_HCLK, TEGRA20_CLK_CLK_MAX, 120000000, 0 },
 	{ TEGRA20_CLK_PCLK, TEGRA20_CLK_CLK_MAX, 60000000, 0 },
 	{ TEGRA20_CLK_CSITE, TEGRA20_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA20_CLK_CCLK, TEGRA20_CLK_CLK_MAX, 0, 1 },
-- 
2.29.2

[PATCH v3 5/6] MAINTAINERS: Hand Tegra clk driver to Jon and Thierry

[Dmitry Osipenko]

Peter and Prashant aren't actively maintaining Tegra clock driver anymore.
Jonathan and Thierry will pick up maintaining of the driver from now on.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 CREDITS     | 6 ++++++
 MAINTAINERS | 4 ++--
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/CREDITS b/CREDITS
index cef83b958cbe..e28724061f90 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1250,6 +1250,10 @@ S: 29 Duchifat St.
 S: Ra'anana 4372029
 S: Israel
 
+N: Prashant Gaikwad
+E: pgaikwad@nvidia.com
+D: Maintained NVIDIA Tegra clock driver
+
 N: Kumar Gala
 E: galak@kernel.crashing.org
 D: Embedded PowerPC 6xx/7xx/74xx/82xx/83xx/85xx support
@@ -3387,7 +3391,9 @@ E:
 D: Macintosh IDE Driver
 
 N: Peter De Schrijver
+E: pdeschrijver@nvidia.com
 E: stud11@cc4.kuleuven.ac.be
+D: Maintained NVIDIA Tegra clock driver
 D: Mitsumi CD-ROM driver patches March version
 S: Molenbaan 29
 S: B2240 Zandhoven
diff --git a/MAINTAINERS b/MAINTAINERS
index cac842923607..558c36f16680 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17587,8 +17587,8 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git
 N:	[^a-z]tegra
 
 TEGRA CLOCK DRIVER
-M:	Peter De Schrijver <pdeschrijver@nvidia.com>
-M:	Prashant Gaikwad <pgaikwad@nvidia.com>
+M:	Jonathan Hunter <jonathanh@nvidia.com>
+M:	Thierry Reding <thierry.reding@gmail.com>
 S:	Supported
 F:	drivers/clk/tegra/
 
-- 
2.29.2

[PATCH v3 6/6] clk: tegra: Don't allow zero clock rate for PLLs

[Dmitry Osipenko]

Zero clock rate doesn't make sense for PLLs and tegra-clk driver enters
into infinite loop on trying to calculate PLL parameters for zero rate.
Make code to error out if requested rate is zero.

Originally this trouble was found by Robert Yang while he was trying to
bring up upstream kernel on Samsung Galaxy Tab, which happened due to a
bug in Tegra DRM driver that erroneously sets PLL rate to zero. This
issues came over again recently during of kernel bring up on ASUS TF700T.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-pll.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index d709ecb7d8d7..af7d4941042e 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -558,6 +558,9 @@ static int _calc_rate(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
 	u32 p_div = 0;
 	int ret;
 
+	if (!rate)
+		return -EINVAL;
+
 	switch (parent_rate) {
 	case 12000000:
 	case 26000000:
-- 
2.29.2