From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: AngeloGioacchino Del Regno
<angelogioacchino.delregno@somainline.org>,
Stephen Boyd <sboyd@kernel.org>, Sasha Levin <sashal@kernel.org>,
linux-clk@vger.kernel.org
Subject: [PATCH AUTOSEL 5.11 26/52] clk: qcom: gdsc: Implement NO_RET_PERIPH flag
Date: Tue, 2 Mar 2021 06:55:07 -0500 [thread overview]
Message-ID: <20210302115534.61800-26-sashal@kernel.org> (raw)
In-Reply-To: <20210302115534.61800-1-sashal@kernel.org>
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
[ Upstream commit 785c02eb35009a4be6dbc68f4f7d916e90b7177d ]
In some rare occasions, we want to only set the RETAIN_MEM bit, but
not the RETAIN_PERIPH one: this is seen on at least SDM630/636/660's
GPU-GX GDSC, where unsetting and setting back the RETAIN_PERIPH bit
will generate chaos and panics during GPU suspend time (mainly, the
chaos is unaligned access).
For this reason, introduce a new NO_RET_PERIPH flag to the GDSC
driver to address this corner case.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210113183817.447866-8-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/qcom/gdsc.c | 10 ++++++++--
drivers/clk/qcom/gdsc.h | 3 ++-
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
index af26e0695b86..51ed640e527b 100644
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
@@ -183,7 +183,10 @@ static inline int gdsc_assert_reset(struct gdsc *sc)
static inline void gdsc_force_mem_on(struct gdsc *sc)
{
int i;
- u32 mask = RETAIN_MEM | RETAIN_PERIPH;
+ u32 mask = RETAIN_MEM;
+
+ if (!(sc->flags & NO_RET_PERIPH))
+ mask |= RETAIN_PERIPH;
for (i = 0; i < sc->cxc_count; i++)
regmap_update_bits(sc->regmap, sc->cxcs[i], mask, mask);
@@ -192,7 +195,10 @@ static inline void gdsc_force_mem_on(struct gdsc *sc)
static inline void gdsc_clear_mem_on(struct gdsc *sc)
{
int i;
- u32 mask = RETAIN_MEM | RETAIN_PERIPH;
+ u32 mask = RETAIN_MEM;
+
+ if (!(sc->flags & NO_RET_PERIPH))
+ mask |= RETAIN_PERIPH;
for (i = 0; i < sc->cxc_count; i++)
regmap_update_bits(sc->regmap, sc->cxcs[i], mask, 0);
diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h
index bd537438c793..5bb396b344d1 100644
--- a/drivers/clk/qcom/gdsc.h
+++ b/drivers/clk/qcom/gdsc.h
@@ -42,7 +42,7 @@ struct gdsc {
#define PWRSTS_ON BIT(2)
#define PWRSTS_OFF_ON (PWRSTS_OFF | PWRSTS_ON)
#define PWRSTS_RET_ON (PWRSTS_RET | PWRSTS_ON)
- const u8 flags;
+ const u16 flags;
#define VOTABLE BIT(0)
#define CLAMP_IO BIT(1)
#define HW_CTRL BIT(2)
@@ -51,6 +51,7 @@ struct gdsc {
#define POLL_CFG_GDSCR BIT(5)
#define ALWAYS_ON BIT(6)
#define RETAIN_FF_ENABLE BIT(7)
+#define NO_RET_PERIPH BIT(8)
struct reset_controller_dev *rcdev;
unsigned int *resets;
unsigned int reset_count;
--
2.30.1
next parent reply other threads:[~2021-03-03 4:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210302115534.61800-1-sashal@kernel.org>
2021-03-02 11:55 ` Sasha Levin [this message]
2021-03-02 23:02 ` [PATCH AUTOSEL 5.11 26/52] clk: qcom: gdsc: Implement NO_RET_PERIPH flag Stephen Boyd
2021-03-04 21:30 ` Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210302115534.61800-26-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=angelogioacchino.delregno@somainline.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sboyd@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox