From: Dinh Nguyen <dinguyen@kernel.org>
To: linux-clk@vger.kernel.org
Cc: dinguyen@kernel.org, sboyd@kernel.org, mturquette@baylibre.com,
stable@vger.kernel.org
Subject: [PATCH 3/4] clk: agilex/stratix10: add support for the 2nd bypass
Date: Wed, 9 Jun 2021 13:50:07 -0500 [thread overview]
Message-ID: <20210609185008.36056-3-dinguyen@kernel.org> (raw)
In-Reply-To: <20210609185008.36056-1-dinguyen@kernel.org>
The EMAC clocks on Stratix10/Agilex/N5X have an additional bypass that
was not being accounted for. The bypass selects between
emaca_clk/emacb_clk and boot_clk.
Because the bypass register offset is different between Stratix10 and
Agilex/N5X, it's best to create a new function to calculate the bypass.
Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
drivers/clk/socfpga/clk-agilex.c | 4 +-
drivers/clk/socfpga/clk-gate-s10.c | 119 +++++++++++++++++++++++++++-
drivers/clk/socfpga/stratix10-clk.h | 2 +
3 files changed, 123 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/socfpga/clk-agilex.c b/drivers/clk/socfpga/clk-agilex.c
index edfa87d0cd76..1cb21ea79c64 100644
--- a/drivers/clk/socfpga/clk-agilex.c
+++ b/drivers/clk/socfpga/clk-agilex.c
@@ -177,6 +177,8 @@ static const struct clk_parent_data emac_mux[] = {
.name = "emaca_free_clk", },
{ .fw_name = "emacb_free_clk",
.name = "emacb_free_clk", },
+ { .fw_name = "boot_clk",
+ .name = "boot_clk", },
};
static const struct clk_parent_data noc_mux[] = {
@@ -399,7 +401,7 @@ static int agilex_clk_register_gate(const struct stratix10_gate_clock *clks,
int i;
for (i = 0; i < nums; i++) {
- hw_clk = s10_register_gate(&clks[i], base);
+ hw_clk = agilex_register_gate(&clks[i], base);
if (IS_ERR(hw_clk)) {
pr_err("%s: failed to register clock %s\n",
__func__, clks[i].name);
diff --git a/drivers/clk/socfpga/clk-gate-s10.c b/drivers/clk/socfpga/clk-gate-s10.c
index b84f2627551e..32567795765f 100644
--- a/drivers/clk/socfpga/clk-gate-s10.c
+++ b/drivers/clk/socfpga/clk-gate-s10.c
@@ -11,6 +11,13 @@
#define SOCFPGA_CS_PDBG_CLK "cs_pdbg_clk"
#define to_socfpga_gate_clk(p) container_of(p, struct socfpga_gate_clk, hw.hw)
+#define SOCFPGA_EMAC0_CLK "emac0_clk"
+#define SOCFPGA_EMAC1_CLK "emac1_clk"
+#define SOCFPGA_EMAC2_CLK "emac2_clk"
+#define AGILEX_BYPASS_OFFSET 0xC
+#define STRATIX10_BYPASS_OFFSET 0x2C
+#define BOOTCLK_BYPASS 2
+
static unsigned long socfpga_gate_clk_recalc_rate(struct clk_hw *hwclk,
unsigned long parent_rate)
{
@@ -44,14 +51,61 @@ static unsigned long socfpga_dbg_clk_recalc_rate(struct clk_hw *hwclk,
static u8 socfpga_gate_get_parent(struct clk_hw *hwclk)
{
struct socfpga_gate_clk *socfpgaclk = to_socfpga_gate_clk(hwclk);
- u32 mask;
+ u32 mask, second_bypass;
+ u8 parent = 0;
+ const char *name = clk_hw_get_name(hwclk);
+
+ if (socfpgaclk->bypass_reg) {
+ mask = (0x1 << socfpgaclk->bypass_shift);
+ parent = ((readl(socfpgaclk->bypass_reg) & mask) >>
+ socfpgaclk->bypass_shift);
+ }
+
+ if (streq(name, SOCFPGA_EMAC0_CLK) ||
+ streq(name, SOCFPGA_EMAC1_CLK) ||
+ streq(name, SOCFPGA_EMAC2_CLK)) {
+ second_bypass = readl(socfpgaclk->bypass_reg -
+ STRATIX10_BYPASS_OFFSET);
+ /* EMACA bypass to bootclk @0xB0 offset */
+ if (second_bypass & 0x1)
+ if (parent == 0) /* only applicable if parent is maca */
+ parent = BOOTCLK_BYPASS;
+
+ if (second_bypass & 0x2)
+ if (parent == 1) /* only applicable if parent is macb */
+ parent = BOOTCLK_BYPASS;
+ }
+ return parent;
+}
+
+static u8 socfpga_agilex_gate_get_parent(struct clk_hw *hwclk)
+{
+ struct socfpga_gate_clk *socfpgaclk = to_socfpga_gate_clk(hwclk);
+ u32 mask, second_bypass;
u8 parent = 0;
+ const char *name = clk_hw_get_name(hwclk);
if (socfpgaclk->bypass_reg) {
mask = (0x1 << socfpgaclk->bypass_shift);
parent = ((readl(socfpgaclk->bypass_reg) & mask) >>
socfpgaclk->bypass_shift);
}
+
+ if (streq(name, SOCFPGA_EMAC0_CLK) ||
+ streq(name, SOCFPGA_EMAC1_CLK) ||
+ streq(name, SOCFPGA_EMAC2_CLK)) {
+ second_bypass = readl(socfpgaclk->bypass_reg -
+ AGILEX_BYPASS_OFFSET);
+ /* EMACA bypass to bootclk @0x88 offset */
+ if (second_bypass & 0x1)
+ if (parent == 0) /* only applicable if parent is maca */
+ parent = BOOTCLK_BYPASS;
+
+ if (second_bypass & 0x2)
+ if (parent == 1) /* only applicable if parent is macb */
+ parent = BOOTCLK_BYPASS;
+ }
+
return parent;
}
@@ -60,6 +114,11 @@ static struct clk_ops gateclk_ops = {
.get_parent = socfpga_gate_get_parent,
};
+static const struct clk_ops agilex_gateclk_ops = {
+ .recalc_rate = socfpga_gate_clk_recalc_rate,
+ .get_parent = socfpga_agilex_gate_get_parent,
+};
+
static const struct clk_ops dbgclk_ops = {
.recalc_rate = socfpga_dbg_clk_recalc_rate,
.get_parent = socfpga_gate_get_parent,
@@ -122,3 +181,61 @@ struct clk_hw *s10_register_gate(const struct stratix10_gate_clock *clks, void _
}
return hw_clk;
}
+
+struct clk_hw *agilex_register_gate(const struct stratix10_gate_clock *clks, void __iomem *regbase)
+{
+ struct clk_hw *hw_clk;
+ struct socfpga_gate_clk *socfpga_clk;
+ struct clk_init_data init;
+ const char *parent_name = clks->parent_name;
+ int ret;
+
+ socfpga_clk = kzalloc(sizeof(*socfpga_clk), GFP_KERNEL);
+ if (!socfpga_clk)
+ return NULL;
+
+ socfpga_clk->hw.reg = regbase + clks->gate_reg;
+ socfpga_clk->hw.bit_idx = clks->gate_idx;
+
+ gateclk_ops.enable = clk_gate_ops.enable;
+ gateclk_ops.disable = clk_gate_ops.disable;
+
+ socfpga_clk->fixed_div = clks->fixed_div;
+
+ if (clks->div_reg)
+ socfpga_clk->div_reg = regbase + clks->div_reg;
+ else
+ socfpga_clk->div_reg = NULL;
+
+ socfpga_clk->width = clks->div_width;
+ socfpga_clk->shift = clks->div_offset;
+
+ if (clks->bypass_reg)
+ socfpga_clk->bypass_reg = regbase + clks->bypass_reg;
+ else
+ socfpga_clk->bypass_reg = NULL;
+ socfpga_clk->bypass_shift = clks->bypass_shift;
+
+ if (streq(clks->name, "cs_pdbg_clk"))
+ init.ops = &dbgclk_ops;
+ else
+ init.ops = &agilex_gateclk_ops;
+
+ init.name = clks->name;
+ init.flags = clks->flags;
+
+ init.num_parents = clks->num_parents;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ if (init.parent_names == NULL)
+ init.parent_data = clks->parent_data;
+ socfpga_clk->hw.hw.init = &init;
+
+ hw_clk = &socfpga_clk->hw.hw;
+
+ ret = clk_hw_register(NULL, &socfpga_clk->hw.hw);
+ if (ret) {
+ kfree(socfpga_clk);
+ return ERR_PTR(ret);
+ }
+ return hw_clk;
+}
diff --git a/drivers/clk/socfpga/stratix10-clk.h b/drivers/clk/socfpga/stratix10-clk.h
index 61eaf3a41fbb..75234e0783e1 100644
--- a/drivers/clk/socfpga/stratix10-clk.h
+++ b/drivers/clk/socfpga/stratix10-clk.h
@@ -85,4 +85,6 @@ struct clk_hw *s10_register_cnt_periph(const struct stratix10_perip_cnt_clock *c
void __iomem *reg);
struct clk_hw *s10_register_gate(const struct stratix10_gate_clock *clks,
void __iomem *reg);
+struct clk_hw *agilex_register_gate(const struct stratix10_gate_clock *clks,
+ void __iomem *reg);
#endif /* __STRATIX10_CLK_H */
--
2.25.1
next prev parent reply other threads:[~2021-06-09 18:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-09 18:50 [PATCH 1/4] clk: agilex/stratix10: remove noc_clk Dinh Nguyen
2021-06-09 18:50 ` [PATCH 2/4] clk: agilex/stratix10: fix bypass representation Dinh Nguyen
2021-06-09 18:58 ` Greg KH
2021-06-09 18:50 ` Dinh Nguyen [this message]
2021-06-09 18:58 ` [PATCH 3/4] clk: agilex/stratix10: add support for the 2nd bypass Greg KH
2021-06-09 18:50 ` [PATCH 4/4] clk: agilex/stratix10/n5x: fix how the bypass_reg is handled Dinh Nguyen
2021-06-09 18:58 ` Greg KH
2021-06-09 18:57 ` [PATCH 1/4] clk: agilex/stratix10: remove noc_clk Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210609185008.36056-3-dinguyen@kernel.org \
--to=dinguyen@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).