[PATCH 5/5] drm/vc4: hdmi: Make sure the controller is powered in detect

[Maxime Ripard <maxime@cerno.tech>]

If the HPD GPIO is not available and drm_probe_ddc fails, we end up
reading the HDMI_HOTPLUG register, but the controller might be powered
off resulting in a CPU hang. Make sure we have the power domain and the
HSM clock powered during the detect cycle to prevent the hang from
happening.

Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 630b84ab73a2..8e6d7e1af200 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -168,6 +168,8 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
 	struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
 	bool connected = false;
 
+	WARN_ON(pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev));
+
 	if (vc4_hdmi->hpd_gpio &&
 	    gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio)) {
 		connected = true;
@@ -188,10 +190,12 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
 			}
 		}
 
+		pm_runtime_put(&vc4_hdmi->pdev->dev);
 		return connector_status_connected;
 	}
 
 	cec_phys_addr_invalidate(vc4_hdmi->cec_adap);
+	pm_runtime_put(&vc4_hdmi->pdev->dev);
 	return connector_status_disconnected;
 }
 
-- 
2.31.1