From: Maxime Ripard <maxime@cerno.tech>
To: Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org, dri-devel@lists.freedesktop.org,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Phil Elwell <phil@raspberrypi.com>,
Tim Gover <tim.gover@raspberrypi.com>,
Dom Cobley <dom@raspberrypi.com>,
Maxime Ripard <maxime@cerno.tech>,
kunit-dev@googlegroups.com
Subject: [PATCH v4 01/10] clk: Introduce Kunit Tests for the framework
Date: Tue, 25 Jan 2022 15:15:40 +0100 [thread overview]
Message-ID: <20220125141549.747889-2-maxime@cerno.tech> (raw)
In-Reply-To: <20220125141549.747889-1-maxime@cerno.tech>
Let's test various parts of the rate-related clock API with the kunit
testing framework.
Cc: kunit-dev@googlegroups.com
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/clk/.kunitconfig | 1 +
drivers/clk/Kconfig | 7 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-test.c | 285 +++++++++++++++++++++++++++++++++++++++
4 files changed, 294 insertions(+)
create mode 100644 drivers/clk/clk-test.c
diff --git a/drivers/clk/.kunitconfig b/drivers/clk/.kunitconfig
index 3754fdb9485a..cdbc7d7deba9 100644
--- a/drivers/clk/.kunitconfig
+++ b/drivers/clk/.kunitconfig
@@ -1,3 +1,4 @@
CONFIG_KUNIT=y
CONFIG_COMMON_CLK=y
+CONFIG_CLK_KUNIT_TEST=y
CONFIG_CLK_GATE_KUNIT_TEST=y
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 3cdf33470a75..2ef6eca297ff 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -429,6 +429,13 @@ source "drivers/clk/xilinx/Kconfig"
source "drivers/clk/zynqmp/Kconfig"
# Kunit test cases
+config CLK_KUNIT_TEST
+ tristate "Basic Clock Framework Kunit Tests" if !KUNIT_ALL_TESTS
+ depends on KUNIT
+ default KUNIT_ALL_TESTS
+ help
+ Kunit tests for the common clock framework.
+
config CLK_GATE_KUNIT_TEST
tristate "Basic gate type Kunit test" if !KUNIT_ALL_TESTS
depends on KUNIT
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 6a98291350b6..2664aaab8068 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -2,6 +2,7 @@
# common clock types
obj-$(CONFIG_HAVE_CLK) += clk-devres.o clk-bulk.o clkdev.o
obj-$(CONFIG_COMMON_CLK) += clk.o
+obj-$(CONFIG_CLK_KUNIT_TEST) += clk-test.o
obj-$(CONFIG_COMMON_CLK) += clk-divider.o
obj-$(CONFIG_COMMON_CLK) += clk-fixed-factor.o
obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o
diff --git a/drivers/clk/clk-test.c b/drivers/clk/clk-test.c
new file mode 100644
index 000000000000..47a600d590c1
--- /dev/null
+++ b/drivers/clk/clk-test.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kunit test for clk rate management
+ */
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+
+#include <kunit/test.h>
+
+#define DUMMY_CLOCK_INIT_RATE (42 * 1000 * 1000)
+#define DUMMY_CLOCK_RATE_1 (142 * 1000 * 1000)
+#define DUMMY_CLOCK_RATE_2 (242 * 1000 * 1000)
+
+struct clk_dummy_context {
+ struct clk_hw hw;
+ unsigned long rate;
+};
+
+static unsigned long clk_dummy_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_dummy_context *ctx =
+ container_of(hw, struct clk_dummy_context, hw);
+
+ return ctx->rate;
+}
+
+static int clk_dummy_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ /* Just return the same rate without modifying it */
+ return 0;
+}
+
+static int clk_dummy_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_dummy_context *ctx =
+ container_of(hw, struct clk_dummy_context, hw);
+
+ ctx->rate = rate;
+ return 0;
+}
+
+static const struct clk_ops clk_dummy_ops = {
+ .recalc_rate = clk_dummy_recalc_rate,
+ .determine_rate = clk_dummy_determine_rate,
+ .set_rate = clk_dummy_set_rate,
+};
+
+static int clk_test_init_with_ops(struct kunit *test, const struct clk_ops *ops)
+{
+ struct clk_dummy_context *ctx;
+ struct clk_init_data init = { };
+ int ret;
+
+ ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+ ctx->rate = DUMMY_CLOCK_INIT_RATE;
+ test->priv = ctx;
+
+ init.name = "test_dummy_rate";
+ init.ops = ops;
+ ctx->hw.init = &init;
+
+ ret = clk_hw_register(NULL, &ctx->hw);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int clk_test_init(struct kunit *test)
+{
+ return clk_test_init_with_ops(test, &clk_dummy_ops);
+}
+
+static void clk_test_exit(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+
+ clk_hw_unregister(&ctx->hw);
+}
+
+/*
+ * Test that the actual rate matches what is returned by clk_get_rate()
+ */
+static void clk_test_get_rate(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_TRUE(test, rate > 0);
+ KUNIT_EXPECT_EQ(test, rate, ctx->rate);
+}
+
+/*
+ * Test that, after a call to clk_set_rate(), the rate returned by
+ * clk_get_rate() matches.
+ *
+ * This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
+ * modify the requested rate, which is our case in clk_dummy_rate_ops.
+ */
+static void clk_test_set_get_rate(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_1),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+}
+
+/*
+ * Test that, after several calls to clk_set_rate(), the rate returned
+ * by clk_get_rate() matches the last one.
+ *
+ * This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
+ * modify the requested rate, which is our case in clk_dummy_rate_ops.
+ */
+static void clk_test_set_set_get_rate(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_1),
+ 0);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
+}
+
+static struct kunit_case clk_test_cases[] = {
+ KUNIT_CASE(clk_test_get_rate),
+ KUNIT_CASE(clk_test_set_get_rate),
+ KUNIT_CASE(clk_test_set_set_get_rate),
+ {}
+};
+
+static struct kunit_suite clk_test_suite = {
+ .name = "clk-test",
+ .init = clk_test_init,
+ .exit = clk_test_exit,
+ .test_cases = clk_test_cases,
+};
+
+/*
+ * Test that clk_set_rate_range won't return an error for a valid range.
+ */
+static void clk_range_test_set_range(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
+ KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
+}
+
+/*
+ * Test that calling clk_set_rate_range with a minimum rate higher than
+ * the maximum rate returns an error.
+ */
+static void clk_range_test_set_range_invalid(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+
+ KUNIT_EXPECT_LT(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1 + 1000,
+ DUMMY_CLOCK_RATE_1),
+ 0);
+}
+
+/*
+ * Test that if our clock has a rate lower than the minimum set by a
+ * call to clk_set_rate_range(), the rate will be raised to match the
+ * new minimum.
+ *
+ * This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
+ * modify the requested rate, which is our case in clk_dummy_rate_ops.
+ */
+static void clk_range_test_set_range_get_rate_raised(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000),
+ 0);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+}
+
+/*
+ * Test that if our clock has a rate higher than the maximum set by a
+ * call to clk_set_rate_range(), the rate will be lowered to match the
+ * new maximum.
+ *
+ * This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
+ * modify the requested rate, which is our case in clk_dummy_rate_ops.
+ */
+static void clk_range_test_set_range_get_rate_lowered(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = hw->clk;
+ unsigned long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
+ 0);
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
+}
+
+static struct kunit_case clk_range_test_cases[] = {
+ KUNIT_CASE(clk_range_test_set_range),
+ KUNIT_CASE(clk_range_test_set_range_invalid),
+ KUNIT_CASE(clk_range_test_set_range_get_rate_raised),
+ KUNIT_CASE(clk_range_test_set_range_get_rate_lowered),
+ {}
+};
+
+static struct kunit_suite clk_range_test_suite = {
+ .name = "clk-range-test",
+ .init = clk_test_init,
+ .exit = clk_test_exit,
+ .test_cases = clk_range_test_cases,
+};
+
+kunit_test_suites(
+ &clk_test_suite,
+ &clk_range_test_suite,
+);
+MODULE_LICENSE("GPL v2");
--
2.34.1
next prev parent reply other threads:[~2022-01-25 14:19 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-25 14:15 [PATCH v4 00/10] clk: Improve clock range handling Maxime Ripard
2022-01-25 14:15 ` Maxime Ripard [this message]
2022-02-19 2:20 ` [PATCH v4 01/10] clk: Introduce Kunit Tests for the framework Stephen Boyd
2022-02-21 15:12 ` Maxime Ripard
2022-02-24 22:30 ` Stephen Boyd
2022-01-25 14:15 ` [PATCH v4 02/10] clk: Always clamp the rounded rate Maxime Ripard
2022-02-18 23:15 ` Stephen Boyd
2022-02-21 16:18 ` Maxime Ripard
2022-02-21 16:43 ` Maxime Ripard
2022-02-24 22:39 ` Stephen Boyd
2022-02-25 9:35 ` Maxime Ripard
2022-02-24 22:32 ` Stephen Boyd
2022-02-25 9:45 ` Maxime Ripard
2022-01-25 14:15 ` [PATCH v4 03/10] clk: Use clamp instead of open-coding our own Maxime Ripard
2022-02-18 22:34 ` Stephen Boyd
2022-02-21 16:30 ` Maxime Ripard
2022-02-24 22:44 ` Stephen Boyd
2022-02-25 9:39 ` Maxime Ripard
2022-01-25 14:15 ` [PATCH v4 04/10] clk: Always set the rate on clk_set_range_rate Maxime Ripard
2022-01-25 14:15 ` [PATCH v4 05/10] clk: Add clk_drop_range Maxime Ripard
2022-02-19 2:22 ` Stephen Boyd
2022-01-25 14:15 ` [PATCH v4 06/10] clk: bcm: rpi: Add variant structure Maxime Ripard
2022-01-25 14:15 ` [PATCH v4 07/10] clk: bcm: rpi: Set a default minimum rate Maxime Ripard
2022-01-25 14:15 ` [PATCH v4 08/10] clk: bcm: rpi: Run some clocks at the minimum rate allowed Maxime Ripard
2022-01-25 14:15 ` [PATCH v4 09/10] drm/vc4: Add logging and comments Maxime Ripard
2022-01-25 14:15 ` [PATCH v4 10/10] drm/vc4: hdmi: Remove clock rate initialization Maxime Ripard
2022-02-10 10:19 ` [PATCH v4 00/10] clk: Improve clock range handling Maxime Ripard
2022-02-19 2:25 ` Stephen Boyd
2022-02-14 9:45 ` [PATCH v4 0/10] " Laurent Pinchart
2022-02-19 2:24 ` Stephen Boyd
2022-02-21 9:56 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220125141549.747889-2-maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=dave.stevenson@raspberrypi.com \
--cc=dom@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=kunit-dev@googlegroups.com \
--cc=linux-clk@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=phil@raspberrypi.com \
--cc=sboyd@kernel.org \
--cc=tim.gover@raspberrypi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox