[PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

William Zhang
2022-07-05T17:28:14Z

[-- Attachment #1: Type: text/plain, Size: 4728 bytes --]

Update ARCH_BCM_63XX in all sources to use ARCHB_BCMBCA instead.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
---

arch/arm/Kconfig.debug | 2 +-
drivers/ata/Kconfig | 2 +-
drivers/char/hw_random/Kconfig | 2 +-
drivers/clk/bcm/Kconfig | 4 ++--
drivers/i2c/busses/Kconfig | 2 +-
drivers/phy/broadcom/Kconfig | 2 +-
drivers/spi/Kconfig | 2 +-
drivers/tty/serial/Kconfig | 4 ++--
8 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9b0aa4822d69..792796a348c3 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -271,7 +271,7 @@ choice

config DEBUG_BCM63XX_UART
bool "Kernel low-level debugging on BCM63XX UART"
- depends on ARCH_BCM_63XX
+ depends on ARCH_BCMBCA

config DEBUG_BERLIN_UART
bool "Marvell Berlin SoC Debug UART"
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index bb45a9c00514..1c9f4fb2595d 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -148,7 +148,7 @@ config SATA_AHCI_PLATFORM
config AHCI_BRCM
tristate "Broadcom AHCI SATA support"
depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
- ARCH_BCM_63XX || COMPILE_TEST
+ ARCH_BCMBCA || COMPILE_TEST
select SATA_HOST
help
This option enables support for the AHCI SATA3 controller found on
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index b3f2d55dc551..3da8e85f8aae 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -87,7 +87,7 @@ config HW_RANDOM_BA431
config HW_RANDOM_BCM2835
tristate "Broadcom BCM2835/BCM63xx Random Number Generator support"
depends on ARCH_BCM2835 || ARCH_BCM_NSP || ARCH_BCM_5301X || \
- ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+ ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
default HW_RANDOM
help
This driver provides kernel-side support for the Random Number
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index ec738f74a026..77266afb1c79 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -22,9 +22,9 @@ config CLK_BCM2835

config CLK_BCM_63XX
bool "Broadcom BCM63xx clock support"
- depends on ARCH_BCM_63XX || COMPILE_TEST
+ depends on ARCH_BCMBCA || COMPILE_TEST
select COMMON_CLK_IPROC
- default ARCH_BCM_63XX
+ default ARCH_BCMBCA
help
Enable common clock framework support for Broadcom BCM63xx DSL SoCs
based on the ARM architecture
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b1d7069dd377..acf2a393bd56 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -486,7 +486,7 @@ config I2C_BCM_KONA

config I2C_BRCMSTB
tristate "BRCM Settop/DSL I2C controller"
- depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCM_63XX || \
+ depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
default y
help
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 849c4204f550..93a6a8ee4716 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -83,7 +83,7 @@ config PHY_NS2_USB_DRD
config PHY_BRCM_SATA
tristate "Broadcom SATA PHY driver"
depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \
- ARCH_BCM_63XX || COMPILE_TEST
+ ARCH_BCMBCA || COMPILE_TEST
depends on OF
select GENERIC_PHY
default ARCH_BCM_IPROC
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2d034459e79f..8e550269d488 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -183,7 +183,7 @@ config SPI_BCM63XX

config SPI_BCM63XX_HSSPI
tristate "Broadcom BCM63XX HS SPI controller driver"
- depends on BCM63XX || BMIPS_GENERIC || ARCH_BCM_63XX || COMPILE_TEST
+ depends on BCM63XX || BMIPS_GENERIC || ARCH_BCMBCA || COMPILE_TEST
help
This enables support for the High Speed SPI controller present on
newer Broadcom BCM63XX SoCs.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 8a3ee1525d80..e3279544b03c 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE
config SERIAL_BCM63XX
tristate "Broadcom BCM63xx/BCM33xx UART support"
select SERIAL_CORE
- depends on ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
- default ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC
+ depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+ default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
help
This enables the driver for the onchip UART core found on
the following chipsets:
--
2.34.1

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]