From: Maxime Ripard <maxime@cerno.tech>
To: Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-clk@vger.kernel.org
Cc: Jerome Brunet <jbrunet@baylibre.com>,
Naresh Kamboju <naresh.kamboju@linaro.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Alexander Stein <alexander.stein@ew.tq-group.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Yassine Oudjana <y.oudjana@protonmail.com>,
Tony Lindgren <tony@atomide.com>,
Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v9 08/25] clk: tests: Add tests for uncached clock
Date: Tue, 16 Aug 2022 13:25:13 +0200 [thread overview]
Message-ID: <20220816112530.1837489-9-maxime@cerno.tech> (raw)
In-Reply-To: <20220816112530.1837489-1-maxime@cerno.tech>
The clock framework supports clocks that can have their rate changed
without the kernel knowing about it using the CLK_GET_RATE_NOCACHE flag.
As its name suggests, this flag turns off the rate caching in the clock
framework, reading out the rate from the hardware any time we need to
read it.
Let's add a couple of tests to make sure it works as intended.
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/clk/clk_test.c | 93 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 92 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index b8e32406a6e4..b269420dafcc 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -270,6 +270,96 @@ static struct kunit_suite clk_test_suite = {
.test_cases = clk_test_cases,
};
+static int clk_uncached_test_init(struct kunit *test)
+{
+ struct clk_dummy_context *ctx;
+ int ret;
+
+ ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+ test->priv = ctx;
+
+ ctx->rate = DUMMY_CLOCK_INIT_RATE;
+ ctx->hw.init = CLK_HW_INIT_NO_PARENT("test-clk",
+ &clk_dummy_rate_ops,
+ CLK_GET_RATE_NOCACHE);
+
+ ret = clk_hw_register(NULL, &ctx->hw);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+/*
+ * Test that for an uncached clock, the clock framework doesn't cache
+ * the rate and clk_get_rate() will return the underlying clock rate
+ * even if it changed.
+ */
+static void clk_test_uncached_get_rate(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = clk_hw_get_clk(hw, NULL);
+ unsigned long rate;
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_INIT_RATE);
+
+ /* We change the rate behind the clock framework's back */
+ ctx->rate = DUMMY_CLOCK_RATE_1;
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+
+ clk_put(clk);
+}
+
+/*
+ * Test that for an uncached clock, clk_set_rate_range() will work
+ * properly if the rate hasn't changed.
+ */
+static void clk_test_uncached_set_range(struct kunit *test)
+{
+ struct clk_dummy_context *ctx = test->priv;
+ struct clk_hw *hw = &ctx->hw;
+ struct clk *clk = clk_hw_get_clk(hw, NULL);
+ unsigned long rate;
+
+ KUNIT_ASSERT_EQ(test,
+ clk_set_rate_range(clk,
+ DUMMY_CLOCK_RATE_1,
+ DUMMY_CLOCK_RATE_2),
+ 0);
+
+ rate = clk_get_rate(clk);
+ KUNIT_ASSERT_GT(test, rate, 0);
+ KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
+ KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
+
+ clk_put(clk);
+}
+
+static struct kunit_case clk_uncached_test_cases[] = {
+ KUNIT_CASE(clk_test_uncached_get_rate),
+ KUNIT_CASE(clk_test_uncached_set_range),
+ {}
+};
+
+/*
+ * Test suite for a basic, uncached, rate clock, without any parent.
+ *
+ * These tests exercise the rate API with simple scenarios
+ */
+static struct kunit_suite clk_uncached_test_suite = {
+ .name = "clk-uncached-test",
+ .init = clk_uncached_test_init,
+ .exit = clk_test_exit,
+ .test_cases = clk_uncached_test_cases,
+};
+
struct clk_single_parent_ctx {
struct clk_dummy_context parent_ctx;
struct clk_hw hw;
@@ -1077,6 +1167,7 @@ kunit_test_suites(
&clk_orphan_transparent_single_parent_test_suite,
&clk_range_test_suite,
&clk_range_maximize_test_suite,
- &clk_range_minimize_test_suite
+ &clk_range_minimize_test_suite,
+ &clk_uncached_test_suite
);
MODULE_LICENSE("GPL v2");
--
2.37.1
next prev parent reply other threads:[~2022-08-16 11:52 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-16 11:25 [PATCH v9 00/25] clk: More clock rate fixes and tests Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 01/25] clk: test: Switch to clk_hw_get_clk Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 02/25] clk: Drop the rate range on clk_put() Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 03/25] clk: Skip clamping when rounding if there's no boundaries Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 04/25] clk: Mention that .recalc_rate can return 0 on error Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 05/25] clk: Clarify clk_get_rate() expectations Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 06/25] clk: tests: Add test suites description Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 07/25] clk: tests: Add reference to the orphan mux bug report Maxime Ripard
2022-08-16 11:25 ` Maxime Ripard [this message]
2022-08-16 11:25 ` [PATCH v9 09/25] clk: tests: Add tests for single parent mux Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 10/25] clk: tests: Add tests for mux with multiple parents Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 11/25] clk: tests: Add some tests for orphan " Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 12/25] clk: Take into account uncached clocks in clk_set_rate_range() Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 13/25] clk: Set req_rate on reparenting Maxime Ripard
2022-10-03 9:59 ` Marek Szyprowski
2022-10-04 20:59 ` Stephen Boyd
2022-10-10 9:56 ` Maxime Ripard
2022-10-10 14:52 ` Maxime Ripard
2022-10-11 1:15 ` Stephen Boyd
2022-08-16 11:25 ` [PATCH v9 14/25] clk: Change clk_core_init_rate_req prototype Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 15/25] clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 16/25] clk: Introduce clk_hw_init_rate_request() Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 17/25] clk: Add our request boundaries in clk_core_init_rate_req Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 18/25] clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 19/25] clk: Introduce clk_core_has_parent() Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 20/25] clk: Constify clk_has_parent() Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 21/25] clk: Stop forwarding clk_rate_requests to the parent Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 22/25] clk: Zero the clk_rate_request structure Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 23/25] clk: Introduce the clk_hw_get_rate_range function Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 24/25] clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d Maxime Ripard
2022-08-16 11:25 ` [PATCH v9 25/25] clk: tests: Add missing test case for ranges Maxime Ripard
2022-08-16 14:07 ` [PATCH v9 00/25] clk: More clock rate fixes and tests Alexander Stein
2022-08-18 6:44 ` Naresh Kamboju
2022-09-02 14:53 ` Maxime Ripard
2022-09-17 8:31 ` Stephen Boyd
2022-09-20 12:35 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220816112530.1837489-9-maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=alexander.stein@ew.tq-group.com \
--cc=dmitry.baryshkov@linaro.org \
--cc=jbrunet@baylibre.com \
--cc=linux-clk@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mturquette@baylibre.com \
--cc=naresh.kamboju@linaro.org \
--cc=narmstrong@baylibre.com \
--cc=sboyd@kernel.org \
--cc=tony@atomide.com \
--cc=y.oudjana@protonmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox