From: Daniel Scally <djrscally@gmail.com>
To: linux-acpi@vger.kernel.org, linux-clk@vger.kernel.org,
platform-driver-x86@vger.kernel.org
Cc: rafael@kernel.org, lenb@kernel.org, mturquette@baylibre.com,
sboyd@kernel.org, hdegoede@redhat.com, markgross@kernel.org,
robert.moore@intel.com
Subject: [PATCH v3 5/5] platform/x86: int3472: Add board data for Surface Go2 IR camera
Date: Thu, 22 Sep 2022 00:04:39 +0100 [thread overview]
Message-ID: <20220921230439.768185-6-djrscally@gmail.com> (raw)
In-Reply-To: <20220921230439.768185-1-djrscally@gmail.com>
Add the board data describing the regulators for the Microsoft
Surface Go line's IR camera.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
---
Changes since v2:
- None
.../x86/intel/int3472/tps68470_board_data.c | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
index e6cc8f40f5af..309eab9c0558 100644
--- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
+++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
@@ -30,6 +30,15 @@ static struct regulator_consumer_supply int347a_vcm_consumer_supplies[] = {
static struct regulator_consumer_supply int347a_vsio_consumer_supplies[] = {
REGULATOR_SUPPLY("dovdd", "i2c-INT347A:00"),
REGULATOR_SUPPLY("vsio", "i2c-INT347A:00-VCM"),
+ REGULATOR_SUPPLY("vddd", "i2c-INT347E:00"),
+};
+
+static struct regulator_consumer_supply int347a_aux1_consumer_supplies[] = {
+ REGULATOR_SUPPLY("vdda", "i2c-INT347E:00"),
+};
+
+static struct regulator_consumer_supply int347a_aux2_consumer_supplies[] = {
+ REGULATOR_SUPPLY("vdddo", "i2c-INT347E:00"),
};
static const struct regulator_init_data surface_go_tps68470_core_reg_init_data = {
@@ -86,6 +95,28 @@ static const struct regulator_init_data surface_go_tps68470_vsio_reg_init_data =
.consumer_supplies = int347a_vsio_consumer_supplies,
};
+static const struct regulator_init_data surface_go_tps68470_aux1_reg_init_data = {
+ .constraints = {
+ .min_uV = 2815200,
+ .max_uV = 2815200,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(int347a_aux1_consumer_supplies),
+ .consumer_supplies = int347a_aux1_consumer_supplies,
+};
+
+static const struct regulator_init_data surface_go_tps68470_aux2_reg_init_data = {
+ .constraints = {
+ .min_uV = 1800600,
+ .max_uV = 1800600,
+ .apply_uV = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(int347a_aux2_consumer_supplies),
+ .consumer_supplies = int347a_aux2_consumer_supplies,
+};
+
static const struct tps68470_regulator_platform_data surface_go_tps68470_pdata = {
.reg_init_data = {
[TPS68470_CORE] = &surface_go_tps68470_core_reg_init_data,
@@ -93,6 +124,8 @@ static const struct tps68470_regulator_platform_data surface_go_tps68470_pdata =
[TPS68470_VCM] = &surface_go_tps68470_vcm_reg_init_data,
[TPS68470_VIO] = &surface_go_tps68470_vio_reg_init_data,
[TPS68470_VSIO] = &surface_go_tps68470_vsio_reg_init_data,
+ [TPS68470_AUX1] = &surface_go_tps68470_aux1_reg_init_data,
+ [TPS68470_AUX2] = &surface_go_tps68470_aux2_reg_init_data,
},
};
--
2.25.1
next prev parent reply other threads:[~2022-09-21 23:04 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-21 23:04 [PATCH v3 0/5] Add multiple-consumer support to int3472-tps68470 driver Daniel Scally
2022-09-21 23:04 ` [PATCH v3 1/5] ACPI: scan: Add acpi_dev_get_next_consumer_dev() Daniel Scally
2022-09-21 23:04 ` [PATCH v3 2/5] ACPI: bus: Add iterator for dependent devices Daniel Scally
2022-09-21 23:04 ` [PATCH v3 3/5] platform/x86: int3472: Support multiple clock consumers Daniel Scally
2022-09-22 8:49 ` Hans de Goede
2022-09-27 12:47 ` Andy Shevchenko
2022-09-27 12:48 ` Andy Shevchenko
2022-09-21 23:04 ` [PATCH v3 4/5] platform/x86: int3472: Support multiple gpio lookups in board data Daniel Scally
2022-09-21 23:04 ` Daniel Scally [this message]
2022-09-22 8:55 ` [PATCH v3 0/5] Add multiple-consumer support to int3472-tps68470 driver Hans de Goede
2022-09-22 9:07 ` Daniel Scally
2022-09-24 17:15 ` Rafael J. Wysocki
2022-09-25 9:23 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220921230439.768185-6-djrscally@gmail.com \
--to=djrscally@gmail.com \
--cc=hdegoede@redhat.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=markgross@kernel.org \
--cc=mturquette@baylibre.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=robert.moore@intel.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox