From: Herve Codina <herve.codina@bootlin.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Herve Codina <herve.codina@bootlin.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Magnus Damm <magnus.damm@gmail.com>,
Gareth Williams <gareth.williams.jx@renesas.com>
Cc: linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH v5 2/5] soc: renesas: r9a06g032-sysctrl: Handle h2mode setting based on USBF presence
Date: Thu, 5 Jan 2023 16:22:54 +0100 [thread overview]
Message-ID: <20230105152257.310642-3-herve.codina@bootlin.com> (raw)
In-Reply-To: <20230105152257.310642-1-herve.codina@bootlin.com>
The CFG_USB[H2MODE] allows to switch the USB configuration. The
configuration supported are:
- One host and one device
or
- Two hosts
Set CFG_USB[H2MODE] based on the USBF controller (USB device)
availability.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/clk/renesas/r9a06g032-clocks.c | 28 ++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c
index 983faa5707b9..087146f2ee06 100644
--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
@@ -25,6 +25,8 @@
#include <linux/spinlock.h>
#include <dt-bindings/clock/r9a06g032-sysctrl.h>
+#define R9A06G032_SYSCTRL_USB 0x00
+#define R9A06G032_SYSCTRL_USB_H2MODE (1<<1)
#define R9A06G032_SYSCTRL_DMAMUX 0xA0
struct r9a06g032_gate {
@@ -918,6 +920,29 @@ static void r9a06g032_clocks_del_clk_provider(void *data)
of_clk_del_provider(data);
}
+static void __init r9a06g032_init_h2mode(struct r9a06g032_priv *clocks)
+{
+ struct device_node *usbf_np = NULL;
+ u32 usb;
+
+ while ((usbf_np = of_find_compatible_node(usbf_np, NULL,
+ "renesas,rzn1-usbf"))) {
+ if (of_device_is_available(usbf_np))
+ break;
+ }
+
+ usb = readl(clocks->reg + R9A06G032_SYSCTRL_USB);
+ if (usbf_np) {
+ /* 1 host and 1 device mode */
+ usb &= ~R9A06G032_SYSCTRL_USB_H2MODE;
+ of_node_put(usbf_np);
+ } else {
+ /* 2 hosts mode */
+ usb |= R9A06G032_SYSCTRL_USB_H2MODE;
+ }
+ writel(usb, clocks->reg + R9A06G032_SYSCTRL_USB);
+}
+
static int __init r9a06g032_clocks_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -947,6 +972,9 @@ static int __init r9a06g032_clocks_probe(struct platform_device *pdev)
clocks->reg = of_iomap(np, 0);
if (WARN_ON(!clocks->reg))
return -ENOMEM;
+
+ r9a06g032_init_h2mode(clocks);
+
for (i = 0; i < ARRAY_SIZE(r9a06g032_clocks); ++i) {
const struct r9a06g032_clkdesc *d = &r9a06g032_clocks[i];
const char *parent_name = d->source ?
--
2.38.1
next prev parent reply other threads:[~2023-01-05 15:23 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-05 15:22 [PATCH v5 0/5] Add the Renesas USBF controller support Herve Codina
2023-01-05 15:22 ` [PATCH v5 1/5] dt-bindings: usb: add the Renesas RZ/N1 USBF controller Herve Codina
2023-01-05 15:22 ` Herve Codina [this message]
2023-01-05 15:22 ` [PATCH v5 3/5] usb: gadget: udc: add Renesas RZ/N1 USBF controller support Herve Codina
2024-03-17 12:18 ` Sergei Shtylyov
2024-03-17 15:51 ` Sergei Shtylyov
2023-01-05 15:22 ` [PATCH v5 4/5] ARM: dts: r9a06g032: Add the USBF controller node Herve Codina
2023-01-05 15:22 ` [PATCH v5 5/5] MAINTAINERS: add the Renesas RZ/N1 USBF controller entry Herve Codina
2023-01-18 8:06 ` [PATCH v5 0/5] Add the Renesas USBF controller support Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230105152257.310642-3-herve.codina@bootlin.com \
--to=herve.codina@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=gareth.williams.jx@renesas.com \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox