[PATCH 2/2] clk: qcom: gcc-msm8996: Use read-only RCG ops for RPM bus clocks

[Konrad Dybcio <konrad.dybcio@linaro.org>]

The config/periph/system NoC clocks are wholly controlled by the
RPM firmware and Linux should never ever alter their configuration.

Switch them over to read-only ops to avoid that.

Fixes: b1e010c0730a ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/clk/qcom/gcc-msm8996.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c
index 5e44d1bcca9e..588e3b67657a 100644
--- a/drivers/clk/qcom/gcc-msm8996.c
+++ b/drivers/clk/qcom/gcc-msm8996.c
@@ -264,7 +264,7 @@ static struct clk_rcg2 system_noc_clk_src = {
 		.name = "system_noc_clk_src",
 		.parent_data = gcc_xo_gpll0_gpll0_early_div,
 		.num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_early_div),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_ro_ops,
 	},
 };
 
@@ -284,7 +284,7 @@ static struct clk_rcg2 config_noc_clk_src = {
 		.name = "config_noc_clk_src",
 		.parent_data = gcc_xo_gpll0,
 		.num_parents = ARRAY_SIZE(gcc_xo_gpll0),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_ro_ops,
 	},
 };
 
@@ -306,7 +306,7 @@ static struct clk_rcg2 periph_noc_clk_src = {
 		.name = "periph_noc_clk_src",
 		.parent_data = gcc_xo_gpll0,
 		.num_parents = ARRAY_SIZE(gcc_xo_gpll0),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_ro_ops,
 	},
 };
 

-- 
2.41.0