From: Chris Morgan <macroalpha82@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: dri-devel@lists.freedesktop.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, sboyd@kernel.org,
mturquette@baylibre.com, tzimmermann@suse.de, mripard@kernel.org,
maarten.lankhorst@linux.intel.com, daniel@ffwll.ch,
airlied@gmail.com, sam@ravnborg.org, quic_jesszhan@quicinc.com,
neil.armstrong@linaro.org, javierm@redhat.com, heiko@sntech.de,
conor+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
robh+dt@kernel.org, Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V2 06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
Date: Mon, 4 Dec 2023 12:57:15 -0600 [thread overview]
Message-ID: <20231204185719.569021-7-macroalpha82@gmail.com> (raw)
In-Reply-To: <20231204185719.569021-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Add support for the Powkiddy X55 panel as used on the Powkiddy X55
handheld gaming console. This panel uses a Himax HX8394 display
controller and requires a vendor provided init sequence. The display
resolution is 720x1280 and is 67mm by 121mm as measured with calipers.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
drivers/gpu/drm/panel/panel-himax-hx8394.c | 137 +++++++++++++++++++++
1 file changed, 137 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
index b68ea09f4725..ff0dc08b9829 100644
--- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
+++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
@@ -38,6 +38,7 @@
#define HX8394_CMD_SETMIPI 0xba
#define HX8394_CMD_SETOTP 0xbb
#define HX8394_CMD_SETREGBANK 0xbd
+#define HX8394_CMD_UNKNOWN5 0xbf
#define HX8394_CMD_UNKNOWN1 0xc0
#define HX8394_CMD_SETDGCLUT 0xc1
#define HX8394_CMD_SETID 0xc3
@@ -52,6 +53,7 @@
#define HX8394_CMD_SETGIP1 0xd5
#define HX8394_CMD_SETGIP2 0xd6
#define HX8394_CMD_SETGPO 0xd6
+#define HX8394_CMD_UNKNOWN4 0xd8
#define HX8394_CMD_SETSCALING 0xdd
#define HX8394_CMD_SETIDLE 0xdf
#define HX8394_CMD_SETGAMMA 0xe0
@@ -203,6 +205,140 @@ static const struct hx8394_panel_desc hsd060bhw4_desc = {
.init_sequence = hsd060bhw4_init_sequence,
};
+static int powkiddy_x55_init_sequence(struct hx8394 *ctx)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ /* 5.19.8 SETEXTC: Set extension command (B9h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETEXTC,
+ 0xff, 0x83, 0x94);
+
+ /* 5.19.9 SETMIPI: Set MIPI control (BAh) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETMIPI,
+ 0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0);
+
+ /* 5.19.2 SETPOWER: Set power (B1h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
+ 0x48, 0x12, 0x72, 0x09, 0x32, 0x54, 0x71, 0x71, 0x57, 0x47);
+
+ /* 5.19.3 SETDISP: Set display related register (B2h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETDISP,
+ 0x00, 0x80, 0x64, 0x2c, 0x16, 0x2f);
+
+ /* 5.19.4 SETCYC: Set display waveform cycles (B4h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETCYC,
+ 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c, 0x86, 0x75,
+ 0x00, 0x3f, 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c,
+ 0x86);
+
+ /* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETVCOM,
+ 0x6e, 0x6e);
+
+ /* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP0,
+ 0x00, 0x00, 0x07, 0x07, 0x40, 0x07, 0x0c, 0x00, 0x08, 0x10,
+ 0x08, 0x00, 0x08, 0x54, 0x15, 0x0a, 0x05, 0x0a, 0x02, 0x15,
+ 0x06, 0x05, 0x06, 0x47, 0x44, 0x0a, 0x0a, 0x4b, 0x10, 0x07,
+ 0x07, 0x0c, 0x40);
+
+ /* 5.19.20 Set GIP Option1 (D5h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP1,
+ 0x1c, 0x1c, 0x1d, 0x1d, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
+ 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x24, 0x25, 0x18, 0x18,
+ 0x26, 0x27, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x20, 0x21,
+ 0x18, 0x18, 0x18, 0x18);
+
+ /* 5.19.21 Set GIP Option2 (D6h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP2,
+ 0x1c, 0x1c, 0x1d, 0x1d, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02,
+ 0x01, 0x00, 0x0b, 0x0a, 0x09, 0x08, 0x21, 0x20, 0x18, 0x18,
+ 0x27, 0x26, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x25, 0x24,
+ 0x18, 0x18, 0x18, 0x18);
+
+ /* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGAMMA,
+ 0x00, 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56,
+ 0x65, 0x66, 0x6e, 0x82, 0x88, 0x8b, 0x9a, 0x9d, 0x98, 0xa8,
+ 0xb9, 0x5d, 0x5c, 0x61, 0x66, 0x6a, 0x6f, 0x7f, 0x7f, 0x00,
+ 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56, 0x65,
+ 0x65, 0x6e, 0x81, 0x87, 0x8b, 0x98, 0x9d, 0x99, 0xa8, 0xba,
+ 0x5d, 0x5d, 0x62, 0x67, 0x6b, 0x72, 0x7f, 0x7f);
+
+ /* Unknown command, not listed in the HX8394-F datasheet */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN1,
+ 0x1f, 0x31);
+
+ /* 5.19.17 SETPANEL (CCh) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPANEL,
+ 0x0b);
+
+ /* Unknown command, not listed in the HX8394-F datasheet */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3,
+ 0x02);
+
+ /* 5.19.11 Set register bank (BDh) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+ 0x02);
+
+ /* Unknown command, not listed in the HX8394-F datasheet */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN4,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff);
+
+ /* 5.19.11 Set register bank (BDh) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+ 0x00);
+
+ /* 5.19.11 Set register bank (BDh) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+ 0x01);
+
+ /* 5.19.2 SETPOWER: Set power (B1h) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
+ 0x00);
+
+ /* 5.19.11 Set register bank (BDh) */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
+ 0x00);
+
+ /* Unknown command, not listed in the HX8394-F datasheet */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN5,
+ 0x40, 0x81, 0x50, 0x00, 0x1a, 0xfc, 0x01);
+
+ /* Unknown command, not listed in the HX8394-F datasheet */
+ mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN2,
+ 0xed);
+
+ return 0;
+}
+
+static const struct drm_display_mode powkiddy_x55_mode = {
+ .hdisplay = 720,
+ .hsync_start = 720 + 44,
+ .hsync_end = 720 + 44 + 20,
+ .htotal = 720 + 44 + 20 + 20,
+ .vdisplay = 1280,
+ .vsync_start = 1280 + 12,
+ .vsync_end = 1280 + 12 + 10,
+ .vtotal = 1280 + 12 + 10 + 10,
+ .clock = 63290,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+ .width_mm = 67,
+ .height_mm = 121,
+};
+
+static const struct hx8394_panel_desc powkiddy_x55_desc = {
+ .mode = &powkiddy_x55_mode,
+ .lanes = 4,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
+ .format = MIPI_DSI_FMT_RGB888,
+ .init_sequence = powkiddy_x55_init_sequence,
+};
+
static int hx8394_enable(struct drm_panel *panel)
{
struct hx8394 *ctx = panel_to_hx8394(panel);
@@ -419,6 +555,7 @@ static void hx8394_remove(struct mipi_dsi_device *dsi)
static const struct of_device_id hx8394_of_match[] = {
{ .compatible = "hannstar,hsd060bhw4", .data = &hsd060bhw4_desc },
+ { .compatible = "powkiddy,x55-panel", .data = &powkiddy_x55_desc },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, hx8394_of_match);
--
2.34.1
next prev parent reply other threads:[~2023-12-04 18:57 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-04 18:57 [PATCH V2 00/10] rockchip: Add Powkiddy X55 Chris Morgan
2023-12-04 18:57 ` [PATCH V2 01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking Chris Morgan
2023-12-05 7:55 ` neil.armstrong
2023-12-04 18:57 ` [PATCH V2 02/10] drm/panel: himax-hx8394: Drop shutdown logic Chris Morgan
2023-12-05 7:57 ` neil.armstrong
2023-12-04 18:57 ` [PATCH V2 03/10] dt-bindings: display: Document Himax HX8394 panel rotation Chris Morgan
2023-12-04 18:57 ` [PATCH V2 04/10] drm/panel: himax-hx8394: Add Panel Rotation Support Chris Morgan
2023-12-05 7:56 ` neil.armstrong
2023-12-04 18:57 ` [PATCH V2 05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel Chris Morgan
2023-12-04 18:57 ` Chris Morgan [this message]
2023-12-05 7:57 ` [PATCH V2 06/10] drm/panel: himax-hx8394: Add Support for " neil.armstrong
2023-12-04 18:57 ` [PATCH V2 07/10] clk: rockchip: Mark pclk_usb as critical on rk3568 Chris Morgan
2023-12-04 18:57 ` [PATCH V2 08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz Chris Morgan
2023-12-04 18:57 ` [PATCH V2 09/10] dt-bindings: arm: rockchip: Add Powkiddy X55 Chris Morgan
2023-12-04 18:57 ` [PATCH V2 10/10] arm64: dts: " Chris Morgan
2023-12-05 8:26 ` [PATCH V2 00/10] " Neil Armstrong
2023-12-05 8:28 ` Neil Armstrong
2023-12-05 9:41 ` Heiko Stübner
2023-12-05 9:52 ` (subset) " Heiko Stuebner
2023-12-05 9:59 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231204185719.569021-7-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=javierm@redhat.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=macromorgan@hotmail.com \
--cc=mripard@kernel.org \
--cc=mturquette@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=quic_jesszhan@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=sboyd@kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox