From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Magnus Damm <magnus.damm@gmail.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
Cong Dang <cong.dang.xn@renesas.com>,
Duy Nguyen <duy.nguyen.rh@renesas.com>,
Hai Pham <hai.pham.ud@renesas.com>,
Linh Phung <linh.phung.jy@renesas.com>,
linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-pm@vger.kernel.org
Subject: Re: [PATCH 02/15] dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions
Date: Wed, 10 Jan 2024 13:02:29 +0100 [thread overview]
Message-ID: <20240110120229.GB1625657@ragnatech.se> (raw)
In-Reply-To: <2e083461752c9d52fdb251ad9071f6111f13c3c5.1704726960.git.geert+renesas@glider.be>
Hi Geert,
Thanks for your patch.
On 2024-01-08 16:33:41 +0100, Geert Uytterhoeven wrote:
> From: Duy Nguyen <duy.nguyen.rh@renesas.com>
>
> Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
> V4M (R8A779H0) SoC.
>
> Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
I have no opinion on Krzysztof comment about renaming the file, for the
file content,
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> Changes compared to the BSP:
> - Drop POST* clocks, as they are internal clocks.
> ---
> include/dt-bindings/clock/r8a779h0-cpg-mssr.h | 96 +++++++++++++++++++
> 1 file changed, 96 insertions(+)
> create mode 100644 include/dt-bindings/clock/r8a779h0-cpg-mssr.h
>
> diff --git a/include/dt-bindings/clock/r8a779h0-cpg-mssr.h b/include/dt-bindings/clock/r8a779h0-cpg-mssr.h
> new file mode 100644
> index 0000000000000000..baf41231c215acb3
> --- /dev/null
> +++ b/include/dt-bindings/clock/r8a779h0-cpg-mssr.h
> @@ -0,0 +1,96 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * Copyright (C) 2023 Renesas Electronics Corp.
> + */
> +#ifndef __DT_BINDINGS_CLOCK_R8A779H0_CPG_MSSR_H__
> +#define __DT_BINDINGS_CLOCK_R8A779H0_CPG_MSSR_H__
> +
> +#include <dt-bindings/clock/renesas-cpg-mssr.h>
> +
> +/* r8a779h0 CPG Core Clocks */
> +
> +#define R8A779H0_CLK_ZX 0
> +#define R8A779H0_CLK_ZD 1
> +#define R8A779H0_CLK_ZS 2
> +#define R8A779H0_CLK_ZT 3
> +#define R8A779H0_CLK_ZTR 4
> +#define R8A779H0_CLK_S0D2 5
> +#define R8A779H0_CLK_S0D3 6
> +#define R8A779H0_CLK_S0D4 7
> +#define R8A779H0_CLK_S0D1_VIO 8
> +#define R8A779H0_CLK_S0D2_VIO 9
> +#define R8A779H0_CLK_S0D4_VIO 10
> +#define R8A779H0_CLK_S0D8_VIO 11
> +#define R8A779H0_CLK_VIOBUSD1 12
> +#define R8A779H0_CLK_VIOBUSD2 13
> +#define R8A779H0_CLK_S0D1_VC 14
> +#define R8A779H0_CLK_S0D2_VC 15
> +#define R8A779H0_CLK_S0D4_VC 16
> +#define R8A779H0_CLK_VCBUSD1 17
> +#define R8A779H0_CLK_VCBUSD2 18
> +#define R8A779H0_CLK_S0D2_MM 19
> +#define R8A779H0_CLK_S0D4_MM 20
> +#define R8A779H0_CLK_S0D2_U3DG 21
> +#define R8A779H0_CLK_S0D4_U3DG 22
> +#define R8A779H0_CLK_S0D2_RT 23
> +#define R8A779H0_CLK_S0D3_RT 24
> +#define R8A779H0_CLK_S0D4_RT 25
> +#define R8A779H0_CLK_S0D6_RT 26
> +#define R8A779H0_CLK_S0D2_PER 27
> +#define R8A779H0_CLK_S0D3_PER 28
> +#define R8A779H0_CLK_S0D4_PER 29
> +#define R8A779H0_CLK_S0D6_PER 30
> +#define R8A779H0_CLK_S0D12_PER 31
> +#define R8A779H0_CLK_S0D24_PER 32
> +#define R8A779H0_CLK_S0D1_HSC 33
> +#define R8A779H0_CLK_S0D2_HSC 34
> +#define R8A779H0_CLK_S0D4_HSC 35
> +#define R8A779H0_CLK_S0D8_HSC 36
> +#define R8A779H0_CLK_SVD1_IR 37
> +#define R8A779H0_CLK_SVD2_IR 38
> +#define R8A779H0_CLK_IMPAD1 39
> +#define R8A779H0_CLK_IMPAD4 40
> +#define R8A779H0_CLK_IMPB 41
> +#define R8A779H0_CLK_SVD1_VIP 42
> +#define R8A779H0_CLK_SVD2_VIP 43
> +#define R8A779H0_CLK_CL 44
> +#define R8A779H0_CLK_CL16M 45
> +#define R8A779H0_CLK_CL16M_MM 46
> +#define R8A779H0_CLK_CL16M_RT 47
> +#define R8A779H0_CLK_CL16M_PER 48
> +#define R8A779H0_CLK_CL16M_HSC 49
> +#define R8A779H0_CLK_ZC0 50
> +#define R8A779H0_CLK_ZC1 51
> +#define R8A779H0_CLK_ZC2 52
> +#define R8A779H0_CLK_ZC3 53
> +#define R8A779H0_CLK_ZB3 54
> +#define R8A779H0_CLK_ZB3D2 55
> +#define R8A779H0_CLK_ZB3D4 56
> +#define R8A779H0_CLK_ZG 57
> +#define R8A779H0_CLK_SD0H 58
> +#define R8A779H0_CLK_SD0 59
> +#define R8A779H0_CLK_RPC 60
> +#define R8A779H0_CLK_RPCD2 61
> +#define R8A779H0_CLK_MSO 62
> +#define R8A779H0_CLK_CANFD 63
> +#define R8A779H0_CLK_CSI 64
> +#define R8A779H0_CLK_FRAY 65
> +#define R8A779H0_CLK_IPC 66
> +#define R8A779H0_CLK_SASYNCRT 67
> +#define R8A779H0_CLK_SASYNCPERD1 68
> +#define R8A779H0_CLK_SASYNCPERD2 69
> +#define R8A779H0_CLK_SASYNCPERD4 70
> +#define R8A779H0_CLK_DSIEXT 71
> +#define R8A779H0_CLK_DSIREF 72
> +#define R8A779H0_CLK_ADGH 73
> +#define R8A779H0_CLK_OSC 74
> +#define R8A779H0_CLK_ZR0 75
> +#define R8A779H0_CLK_ZR1 76
> +#define R8A779H0_CLK_ZR2 77
> +#define R8A779H0_CLK_RGMII 78
> +#define R8A779H0_CLK_CPEX 79
> +#define R8A779H0_CLK_CP 80
> +#define R8A779H0_CLK_CBFUSA 81
> +#define R8A779H0_CLK_R 82
> +
> +#endif /* __DT_BINDINGS_CLOCK_R8A779H0_CPG_MSSR_H__ */
> --
> 2.34.1
>
>
--
Kind Regards,
Niklas Söderlund
next prev parent reply other threads:[~2024-01-10 12:02 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-08 15:33 [PATCH 00/15] arm64: renesas: Add R-Car V4M and Gray Hawk Single support Geert Uytterhoeven
2024-01-08 15:33 ` [PATCH 01/15] dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support Geert Uytterhoeven
2024-01-08 17:49 ` Conor Dooley
2024-01-10 11:59 ` Niklas Söderlund
2024-01-24 10:27 ` Wolfram Sang
2024-01-08 15:33 ` [PATCH 02/15] dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions Geert Uytterhoeven
2024-01-09 19:21 ` Krzysztof Kozlowski
2024-01-15 9:27 ` Geert Uytterhoeven
2024-01-15 11:39 ` Krzysztof Kozlowski
2024-01-24 10:33 ` Wolfram Sang
2024-01-10 12:02 ` Niklas Söderlund [this message]
2024-01-08 15:33 ` [PATCH 03/15] dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support Geert Uytterhoeven
2024-01-08 17:53 ` Conor Dooley
2024-01-24 10:35 ` Wolfram Sang
2024-01-10 12:03 ` Niklas Söderlund
2024-01-24 10:33 ` Wolfram Sang
2024-01-08 15:33 ` [PATCH 04/15] dt-bindings: power: Add r8a779h0 SYSC power domain definitions Geert Uytterhoeven
2024-01-10 12:04 ` Niklas Söderlund
2024-01-08 15:33 ` [PATCH 05/15] dt-bindings: reset: renesas,rst: Document R-Car V4M support Geert Uytterhoeven
2024-01-08 17:55 ` Conor Dooley
2024-01-10 12:05 ` Niklas Söderlund
2024-01-24 10:35 ` Wolfram Sang
2024-01-08 15:33 ` [PATCH 06/15] dt-bindings: soc: renesas: Document R-Car V4M Gray Hawk Single Geert Uytterhoeven
2024-01-08 17:54 ` Conor Dooley
2024-01-10 12:10 ` Niklas Söderlund
2024-01-24 10:38 ` Wolfram Sang
2024-01-08 15:33 ` [PATCH 07/15] clk: renesas: rcar-gen4: Add support for FRQCRC1 Geert Uytterhoeven
2024-01-10 12:13 ` Niklas Söderlund
2024-01-24 10:41 ` Wolfram Sang
2024-01-08 15:33 ` [PATCH 08/15] clk: renesas: cpg-mssr: Add support for R-Car V4M Geert Uytterhoeven
2024-01-08 15:33 ` [PATCH 09/15] pmdomain: renesas: r8a779h0-sysc: Add r8a779h0 support Geert Uytterhoeven
2024-01-08 15:33 ` [PATCH 10/15] soc: renesas: Introduce ARCH_RCAR_GEN4 Geert Uytterhoeven
2024-01-24 10:48 ` Wolfram Sang
2024-01-08 15:33 ` [PATCH 11/15] soc: renesas: Identify R-Car V4M Geert Uytterhoeven
2024-01-24 10:49 ` Wolfram Sang
2024-01-08 15:33 ` [PATCH 12/15] soc: renesas: rcar-rst: Add support for " Geert Uytterhoeven
2024-01-24 10:51 ` Wolfram Sang
2024-01-08 15:33 ` [PATCH 13/15] arm64: dts: renesas: Add Renesas R8A779H0 SoC support Geert Uytterhoeven
2024-01-08 15:33 ` [PATCH 14/15] arm64: dts: renesas: Add Gray Hawk Single board support Geert Uytterhoeven
2024-01-24 10:52 ` Wolfram Sang
2024-01-08 15:33 ` [PATCH 15/15] arm64: defconfig: Enable R8A779H0 SoC Geert Uytterhoeven
2024-01-24 10:53 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240110120229.GB1625657@ragnatech.se \
--to=niklas.soderlund@ragnatech.se \
--cc=catalin.marinas@arm.com \
--cc=cong.dang.xn@renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=duy.nguyen.rh@renesas.com \
--cc=geert+renesas@glider.be \
--cc=hai.pham.ud@renesas.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linh.phung.jy@renesas.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox