Linux clock framework development
 help / color / mirror / Atom feed
From: Sam Protsenko <semen.protsenko@linaro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/3] arm64: dts: exynos: Add SPI nodes for Exynos850
Date: Wed, 24 Jan 2024 19:38:58 -0600	[thread overview]
Message-ID: <20240125013858.3986-4-semen.protsenko@linaro.org> (raw)
In-Reply-To: <20240125013858.3986-1-semen.protsenko@linaro.org>

Some USI blocks can be configured as SPI controllers. Add corresponding
SPI nodes to Exynos850 SoC device tree.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
Changes in v2:
  - Sorted pinctrl properties properly

 arch/arm64/boot/dts/exynos/exynos850.dtsi | 54 +++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index 618bc674896e..ca257da74b50 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -738,6 +738,24 @@ usi_spi_0: usi@139400c0 {
 				 <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
 			clock-names = "pclk", "ipclk";
 			status = "disabled";
+
+			spi_0: spi@13940000 {
+				compatible = "samsung,exynos850-spi";
+				reg = <0x13940000 0x30>;
+				interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi0_pins>;
+				pinctrl-names = "default";
+				clocks = <&cmu_peri CLK_GOUT_SPI0_IPCLK>,
+					 <&cmu_peri CLK_GOUT_SPI0_PCLK>;
+				clock-names = "spi_busclk0", "spi";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 5>, <&pdma0 4>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		usi_cmgp0: usi@11d000c0 {
@@ -779,6 +797,24 @@ serial_1: serial@11d00000 {
 				clock-names = "uart", "clk_uart_baud0";
 				status = "disabled";
 			};
+
+			spi_1: spi@11d00000 {
+				compatible = "samsung,exynos850-spi";
+				reg = <0x11d00000 0x30>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi1_pins>;
+				pinctrl-names = "default";
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>;
+				clock-names = "spi_busclk0", "spi";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 12>, <&pdma0 13>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		usi_cmgp1: usi@11d200c0 {
@@ -820,6 +856,24 @@ serial_2: serial@11d20000 {
 				clock-names = "uart", "clk_uart_baud0";
 				status = "disabled";
 			};
+
+			spi_2: spi@11d20000 {
+				compatible = "samsung,exynos850-spi";
+				reg = <0x11d20000 0x30>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&spi2_pins>;
+				pinctrl-names = "default";
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>;
+				clock-names = "spi_busclk0", "spi";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 14>, <&pdma0 15>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 	};
 };
-- 
2.39.2


  parent reply	other threads:[~2024-01-25  1:39 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-25  1:38 [PATCH v2 0/3] arm64: exynos: Enable SPI for Exynos850 Sam Protsenko
2024-01-25  1:38 ` [PATCH v2 1/3] clk: samsung: exynos850: Propagate SPI IPCLK rate change Sam Protsenko
2024-01-29 17:46   ` Tudor Ambarus
2024-02-01 10:36   ` (subset) " Krzysztof Kozlowski
2024-01-25  1:38 ` [PATCH v2 2/3] arm64: dts: exynos: Add PDMA node for Exynos850 Sam Protsenko
2024-02-01 10:36   ` (subset) " Krzysztof Kozlowski
2024-01-25  1:38 ` Sam Protsenko [this message]
2024-01-29 17:51   ` [PATCH v2 3/3] arm64: dts: exynos: Add SPI nodes " Tudor Ambarus
2024-01-29 19:39     ` Sam Protsenko
2024-01-30  6:11       ` Tudor Ambarus
2024-02-01 10:31   ` Krzysztof Kozlowski
2024-02-01 14:22     ` Sam Protsenko
2024-02-01 10:36   ` (subset) " Krzysztof Kozlowski
2024-02-01 11:56     ` Krzysztof Kozlowski
2024-02-01 18:24       ` Sam Protsenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240125013858.3986-4-semen.protsenko@linaro.org \
    --to=semen.protsenko@linaro.org \
    --cc=alim.akhtar@samsung.com \
    --cc=conor+dt@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.nawrocki@samsung.com \
    --cc=tomasz.figa@gmail.com \
    --cc=tudor.ambarus@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox