From: Sam Protsenko <semen.protsenko@linaro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>
Cc: Alim Akhtar <alim.akhtar@samsung.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Tomasz Figa <tomasz.figa@gmail.com>,
linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 09/16] clk: samsung: Pass register layout type explicitly to CLK_CPU()
Date: Fri, 16 Feb 2024 16:32:38 -0600 [thread overview]
Message-ID: <20240216223245.12273-10-semen.protsenko@linaro.org> (raw)
In-Reply-To: <20240216223245.12273-1-semen.protsenko@linaro.org>
Make it more obvious which register layout should be used for a CPU
clock. It prepares clk-cpu.c for adding new chips support.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
drivers/clk/samsung/clk-cpu.c | 2 +-
drivers/clk/samsung/clk-cpu.h | 12 ++++++++++--
drivers/clk/samsung/clk-exynos3250.c | 2 +-
drivers/clk/samsung/clk-exynos4.c | 6 +++---
drivers/clk/samsung/clk-exynos5250.c | 3 ++-
drivers/clk/samsung/clk-exynos5420.c | 8 ++++----
drivers/clk/samsung/clk-exynos5433.c | 8 ++++----
drivers/clk/samsung/clk.h | 4 +++-
8 files changed, 28 insertions(+), 17 deletions(-)
diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c
index 4c46416281a3..21998c89b96d 100644
--- a/drivers/clk/samsung/clk-cpu.c
+++ b/drivers/clk/samsung/clk-cpu.c
@@ -464,7 +464,7 @@ static int __init exynos_register_cpu_clock(struct samsung_clk_provider *ctx,
cpuclk->lock = &ctx->lock;
cpuclk->flags = clk_data->flags;
cpuclk->clk_nb.notifier_call = exynos_cpuclk_notifier_cb;
- if (clk_data->flags & CLK_CPU_HAS_E5433_REGS_LAYOUT) {
+ if (clk_data->reg_layout == CPUCLK_LAYOUT_E5433) {
cpuclk->pre_rate_cb = exynos5433_cpuclk_pre_rate_change;
cpuclk->post_rate_cb = exynos5433_cpuclk_post_rate_change;
} else {
diff --git a/drivers/clk/samsung/clk-cpu.h b/drivers/clk/samsung/clk-cpu.h
index ee57f3638fed..4382ab005ad3 100644
--- a/drivers/clk/samsung/clk-cpu.h
+++ b/drivers/clk/samsung/clk-cpu.h
@@ -12,8 +12,16 @@
#define CLK_CPU_HAS_DIV1 BIT(0)
/* When ALT parent is active, debug clocks need safe divider values */
#define CLK_CPU_NEEDS_DEBUG_ALT_DIV BIT(1)
-/* The CPU clock registers have Exynos5433-compatible layout */
-#define CLK_CPU_HAS_E5433_REGS_LAYOUT BIT(2)
+
+/**
+ * enum exynos_cpuclk_layout - CPU clock registers layout compatibility
+ * @CPUCLK_LAYOUT_E4210: Exynos4210 compatible layout
+ * @CPUCLK_LAYOUT_E5433: Exynos5433 compatible layout
+ */
+enum exynos_cpuclk_layout {
+ CPUCLK_LAYOUT_E4210,
+ CPUCLK_LAYOUT_E5433,
+};
/**
* struct exynos_cpuclk_cfg_data - config data to setup cpu clocks
diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
index d1b72a75bc5a..bd017a68163d 100644
--- a/drivers/clk/samsung/clk-exynos3250.c
+++ b/drivers/clk/samsung/clk-exynos3250.c
@@ -773,7 +773,7 @@ static const struct exynos_cpuclk_cfg_data e3250_armclk_d[] __initconst = {
static const struct samsung_cpu_clock exynos3250_cpu_clks[] __initconst = {
CPU_CLK(CLK_ARM_CLK, "armclk", CLK_MOUT_APLL, CLK_MOUT_MPLL_USER_C,
- CLK_CPU_HAS_DIV1, 0x14000, e3250_armclk_d),
+ CLK_CPU_HAS_DIV1, 0x14000, CPUCLK_LAYOUT_E4210, e3250_armclk_d),
};
static void __init exynos3_core_down_clock(void __iomem *reg_base)
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index 3d57020a620f..e1b7a5e0dbb8 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -1252,19 +1252,19 @@ static const struct exynos_cpuclk_cfg_data e4412_armclk_d[] __initconst = {
static const struct samsung_cpu_clock exynos4210_cpu_clks[] __initconst = {
CPU_CLK(CLK_ARM_CLK, "armclk", CLK_MOUT_APLL, CLK_SCLK_MPLL,
CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1, 0x14000,
- e4210_armclk_d),
+ CPUCLK_LAYOUT_E4210, e4210_armclk_d),
};
static const struct samsung_cpu_clock exynos4212_cpu_clks[] __initconst = {
CPU_CLK(CLK_ARM_CLK, "armclk", CLK_MOUT_APLL, CLK_MOUT_MPLL_USER_C,
CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1, 0x14000,
- e4212_armclk_d),
+ CPUCLK_LAYOUT_E4210, e4212_armclk_d),
};
static const struct samsung_cpu_clock exynos4412_cpu_clks[] __initconst = {
CPU_CLK(CLK_ARM_CLK, "armclk", CLK_MOUT_APLL, CLK_MOUT_MPLL_USER_C,
CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1, 0x14000,
- e4412_armclk_d),
+ CPUCLK_LAYOUT_E4210, e4412_armclk_d),
};
/* register exynos4 clocks */
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index 4953da754994..36d28d466da9 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -776,7 +776,8 @@ static const struct exynos_cpuclk_cfg_data exynos5250_armclk_d[] __initconst = {
static const struct samsung_cpu_clock exynos5250_cpu_clks[] __initconst = {
CPU_CLK(CLK_ARM_CLK, "armclk", CLK_MOUT_APLL, CLK_MOUT_MPLL,
- CLK_CPU_HAS_DIV1, 0x0, exynos5250_armclk_d),
+ CLK_CPU_HAS_DIV1, 0x0, CPUCLK_LAYOUT_E4210,
+ exynos5250_armclk_d),
};
static const struct of_device_id ext_clk_match[] __initconst = {
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 531ef1c3fa30..f8cd28465b58 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -1555,16 +1555,16 @@ static const struct exynos_cpuclk_cfg_data exynos5420_kfcclk_d[] __initconst = {
static const struct samsung_cpu_clock exynos5420_cpu_clks[] __initconst = {
CPU_CLK(CLK_ARM_CLK, "armclk", CLK_MOUT_APLL, CLK_MOUT_MSPLL_CPU, 0,
- 0x0, exynos5420_eglclk_d),
+ 0x0, CPUCLK_LAYOUT_E4210, exynos5420_eglclk_d),
CPU_CLK(CLK_KFC_CLK, "kfcclk", CLK_MOUT_KPLL, CLK_MOUT_MSPLL_KFC, 0,
- 0x28000, exynos5420_kfcclk_d),
+ 0x28000, CPUCLK_LAYOUT_E4210, exynos5420_kfcclk_d),
};
static const struct samsung_cpu_clock exynos5800_cpu_clks[] __initconst = {
CPU_CLK(CLK_ARM_CLK, "armclk", CLK_MOUT_APLL, CLK_MOUT_MSPLL_CPU, 0,
- 0x0, exynos5800_eglclk_d),
+ 0x0, CPUCLK_LAYOUT_E4210, exynos5800_eglclk_d),
CPU_CLK(CLK_KFC_CLK, "kfcclk", CLK_MOUT_KPLL, CLK_MOUT_MSPLL_KFC, 0,
- 0x28000, exynos5420_kfcclk_d),
+ 0x28000, CPUCLK_LAYOUT_E4210, exynos5420_kfcclk_d),
};
static const struct of_device_id ext_clk_match[] __initconst = {
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index 379744f0a5b6..d35901af21d0 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -3698,8 +3698,8 @@ static const struct exynos_cpuclk_cfg_data exynos5433_apolloclk_d[] __initconst
static const struct samsung_cpu_clock apollo_cpu_clks[] __initconst = {
CPU_CLK(CLK_SCLK_APOLLO, "apolloclk", CLK_MOUT_APOLLO_PLL,
- CLK_MOUT_BUS_PLL_APOLLO_USER, CLK_CPU_HAS_E5433_REGS_LAYOUT,
- 0x0, exynos5433_apolloclk_d),
+ CLK_MOUT_BUS_PLL_APOLLO_USER, 0, 0x0,
+ CPUCLK_LAYOUT_E5433, exynos5433_apolloclk_d),
};
static const struct samsung_cmu_info apollo_cmu_info __initconst = {
@@ -3942,8 +3942,8 @@ static const struct exynos_cpuclk_cfg_data exynos5433_atlasclk_d[] __initconst =
static const struct samsung_cpu_clock atlas_cpu_clks[] __initconst = {
CPU_CLK(CLK_SCLK_ATLAS, "atlasclk", CLK_MOUT_ATLAS_PLL,
- CLK_MOUT_BUS_PLL_ATLAS_USER, CLK_CPU_HAS_E5433_REGS_LAYOUT,
- 0x0, exynos5433_atlasclk_d),
+ CLK_MOUT_BUS_PLL_ATLAS_USER, 0, 0x0,
+ CPUCLK_LAYOUT_E5433, exynos5433_atlasclk_d),
};
static const struct samsung_cmu_info atlas_cmu_info __initconst = {
diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
index 8157479f45eb..87bbb8b31b03 100644
--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
@@ -283,10 +283,11 @@ struct samsung_cpu_clock {
unsigned int alt_parent_id;
unsigned long flags;
int offset;
+ enum exynos_cpuclk_layout reg_layout;
const struct exynos_cpuclk_cfg_data *cfg;
};
-#define CPU_CLK(_id, _name, _pid, _apid, _flags, _offset, _cfg) \
+#define CPU_CLK(_id, _name, _pid, _apid, _flags, _offset, _layout, _cfg) \
{ \
.id = _id, \
.name = _name, \
@@ -294,6 +295,7 @@ struct samsung_cpu_clock {
.alt_parent_id = _apid, \
.flags = _flags, \
.offset = _offset, \
+ .reg_layout = _layout, \
.cfg = _cfg, \
}
--
2.39.2
next prev parent reply other threads:[~2024-02-16 22:32 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-16 22:32 [PATCH 00/16] clk: samsung: Add CPU clocks for Exynos850 Sam Protsenko
2024-02-16 22:32 ` [PATCH 01/16] dt-bindings: clock: exynos850: Add CMU_CPUCLK0 and CMU_CPUCL1 Sam Protsenko
2024-02-16 22:32 ` [PATCH 02/16] clk: samsung: Improve clk-cpu.c style Sam Protsenko
2024-02-16 22:32 ` [PATCH 03/16] clk: samsung: Pull struct exynos_cpuclk into clk-cpu.c Sam Protsenko
2024-02-16 22:32 ` [PATCH 04/16] clk: samsung: Reduce params count in exynos_register_cpu_clock() Sam Protsenko
2024-02-16 22:32 ` [PATCH 05/16] clk: samsung: Use single CPU clock notifier callback for all chips Sam Protsenko
2024-02-16 22:32 ` [PATCH 06/16] clk: samsung: Group CPU clock functions by chip Sam Protsenko
2024-02-16 22:32 ` [PATCH 07/16] clk: samsung: Pass actual clock controller base address to CPU_CLK() Sam Protsenko
2024-02-20 10:53 ` Krzysztof Kozlowski
2024-02-21 23:41 ` Sam Protsenko
2024-02-16 22:32 ` [PATCH 08/16] clk: samsung: Use clk.h as a single header for Samsung CCF Sam Protsenko
2024-02-20 10:55 ` Krzysztof Kozlowski
2024-02-16 22:32 ` Sam Protsenko [this message]
2024-02-20 10:56 ` [PATCH 09/16] clk: samsung: Pass register layout type explicitly to CLK_CPU() Krzysztof Kozlowski
2024-02-16 22:32 ` [PATCH 10/16] clk: samsung: Keep CPU clock chip specific data in a dedicated struct Sam Protsenko
2024-02-16 22:32 ` [PATCH 11/16] clk: samsung: Keep register offsets in chip specific structure Sam Protsenko
2024-02-20 11:04 ` Krzysztof Kozlowski
2024-02-22 0:42 ` Sam Protsenko
2024-02-22 7:47 ` Krzysztof Kozlowski
2024-02-24 19:57 ` Sam Protsenko
2024-02-16 22:32 ` [PATCH 12/16] clk: samsung: Pass mask to wait_until_mux_stable() Sam Protsenko
2024-02-16 22:32 ` [PATCH 13/16] clk: samsung: Add CPU clock support for Exynos850 Sam Protsenko
2024-02-16 22:32 ` [PATCH 14/16] clk: samsung: Implement manual PLL control for ARM64 SoCs Sam Protsenko
2024-02-16 22:32 ` [PATCH 15/16] clk: samsung: exynos850: Add CMU_CPUCL0 and CMU_CPUCL1 Sam Protsenko
2024-02-16 22:32 ` [PATCH 16/16] arm64: dts: exynos: Add CPU clocks Sam Protsenko
2024-02-20 11:07 ` [PATCH 00/16] clk: samsung: Add CPU clocks for Exynos850 Krzysztof Kozlowski
2024-02-21 23:07 ` Sam Protsenko
2024-02-22 7:45 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240216223245.12273-10-semen.protsenko@linaro.org \
--to=semen.protsenko@linaro.org \
--cc=alim.akhtar@samsung.com \
--cc=conor+dt@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=sboyd@kernel.org \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox