[PATCH 1/7] clk: sunxi-ng: mp: Add SUNXI_CCU_P_DATA_WITH_MUX_GATE wrapper

[Andre Przywara <andre.przywara@arm.com>]

The PRCM CCU in the A523 SoC contains some clocks that only feature a
P (shift) factor, but no M divider.
Treat this as a special case of an MP clock: by forcing the M mask to be
0 bits wide, this always result in the M divider value to be 1.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/clk/sunxi-ng/ccu_mp.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/clk/sunxi-ng/ccu_mp.h b/drivers/clk/sunxi-ng/ccu_mp.h
index 6e50f3728fb5f..e235fdfde2d36 100644
--- a/drivers/clk/sunxi-ng/ccu_mp.h
+++ b/drivers/clk/sunxi-ng/ccu_mp.h
@@ -71,6 +71,24 @@ struct ccu_mp {
 		}							\
 	}
 
+#define SUNXI_CCU_P_DATA_WITH_MUX_GATE(_struct, _name, _parents, _reg,	\
+				       _pshift, _pwidth,		\
+				       _muxshift, _muxwidth,		\
+				       _gate, _flags)			\
+	struct ccu_mp _struct = {					\
+		.enable	= _gate,					\
+		.m	= _SUNXI_CCU_DIV(0, 0),				\
+		.p	= _SUNXI_CCU_DIV(_pshift, _pwidth),		\
+		.mux	= _SUNXI_CCU_MUX(_muxshift, _muxwidth),		\
+		.common	= {						\
+			.reg		= _reg,				\
+			.hw.init	= CLK_HW_INIT_PARENTS_DATA(_name,    \
+								   _parents, \
+								   &ccu_mp_ops,\
+								   _flags),  \
+		}							\
+	}
+
 #define SUNXI_CCU_MP_WITH_MUX(_struct, _name, _parents, _reg,		\
 			      _mshift, _mwidth,				\
 			      _pshift, _pwidth,				\
-- 
2.46.2