From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 4/4] arm64: dts: renesas: r8a779g0: Add VSPX instances
Date: Wed, 18 Dec 2024 01:42:15 +0200 [thread overview]
Message-ID: <20241217234215.GQ23470@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20241217-rcar-v4h-vspx-v1-4-de04ea044ed4@ideasonboard.com>
Hi Jacopo,
Thank you for the patch.
On Tue, Dec 17, 2024 at 06:53:17PM +0100, Jacopo Mondi wrote:
> Add device nodes for the VSPX instances on R-Car V4H (R8A779G0) SoC.
>
> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
> ---
> arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
> index e49748563e2f5706ed982d6c9cc1df59f27bd0dc..bf4ec5fb7bbdba55e2994f332fcbd623839079c2 100644
> --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
> @@ -2211,6 +2211,28 @@ vspd1: vsp@fea28000 {
> renesas,fcp = <&fcpvd1>;
> };
>
> + vspx0: vsp@fedd0000 {
Please keep those sorted by unit address too.
> + compatible = "renesas,vsp2";
> + reg = <0 0xfedd0000 0 0x8000>;
> + interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>;
The interrupts are listed as "negative level sensitive" in the
documentation. Tomi encountered a similar situation with the V4M VSP,
and setting the level to low in the DT didn't work. I assume this will
be fine, but if you encounter interrupt issues, this is one possible
area to investigate.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> + clocks = <&cpg CPG_MOD 1028>;
> + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
> + resets = <&cpg 1028>;
> +
> + renesas,fcp = <&fcpvx0>;
> + };
> +
> + vspx1: vsp@fedd8000 {
> + compatible = "renesas,vsp2";
> + reg = <0 0xfedd8000 0 0x8000>;
> + interrupts = <GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 1029>;
> + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
> + resets = <&cpg 1029>;
> +
> + renesas,fcp = <&fcpvx1>;
> + };
> +
> du: display@feb00000 {
> compatible = "renesas,du-r8a779g0";
> reg = <0 0xfeb00000 0 0x40000>;
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2024-12-17 23:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-17 17:53 [PATCH 0/4] renesas: r8a779g0: Enable VSPX on R-Car V4H Jacopo Mondi
2024-12-17 17:53 ` [PATCH 1/4] clk: renesas: r8a779g0: Add FCPVX clocks Jacopo Mondi
2024-12-17 23:46 ` Laurent Pinchart
2024-12-18 8:53 ` Jacopo Mondi
2024-12-17 17:53 ` [PATCH 2/4] arm64: dts: renesas: r8a779g0: Add FCPVX instances Jacopo Mondi
2024-12-17 23:30 ` Laurent Pinchart
2024-12-17 17:53 ` [PATCH 3/4] clk: renesas: r8a779g0: Add VSPX clocks Jacopo Mondi
2024-12-17 23:47 ` Laurent Pinchart
2024-12-17 17:53 ` [PATCH 4/4] arm64: dts: renesas: r8a779g0: Add VSPX instances Jacopo Mondi
2024-12-17 23:42 ` Laurent Pinchart [this message]
2024-12-18 8:43 ` Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241217234215.GQ23470@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=jacopo.mondi@ideasonboard.com \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mturquette@baylibre.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox