[PATCH RESEND v4 3/3] dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings

[Gabriel Fernandez <gabriel.fernandez@foss.st.com>]

- drop minItems from access-controllers
- remove rcc label from example
- fixes typos
- remove double '::' from 'See also::'

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
---
 .../devicetree/bindings/clock/st,stm32mp25-rcc.yaml         | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml
index 88e52f10d1ecc68e818cd7d8cb1ca39dceb7a494..1e3b5d218bb01acb247d27bc6902be821cabd98c 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml
+++ b/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml
@@ -11,9 +11,9 @@ maintainers:
 
 description: |
   The RCC hardware block is both a reset and a clock controller.
-  RCC makes also power management (resume/supend).
+  RCC makes also power management (resume/suspend).
 
-  See also::
+  See also:
     include/dt-bindings/clock/st,stm32mp25-rcc.h
     include/dt-bindings/reset/st,stm32mp25-rcc.h
 
@@ -38,7 +38,7 @@ properties:
       - description: CK_SCMI_MSI Low Power Internal oscillator (~ 4 MHz or ~ 16 MHz)
       - description: CK_SCMI_LSE Low Speed External oscillator (32 KHz)
       - description: CK_SCMI_LSI Low Speed Internal oscillator (~ 32 KHz)
-      - description: CK_SCMI_HSE_DIV2 CK_SCMI_HSE divided by 2 (coud be gated)
+      - description: CK_SCMI_HSE_DIV2 CK_SCMI_HSE divided by 2 (could be gated)
       - description: CK_SCMI_ICN_HS_MCU High Speed interconnect bus clock
       - description: CK_SCMI_ICN_LS_MCU Low Speed interconnect bus clock
       - description: CK_SCMI_ICN_SDMMC SDMMC interconnect bus clock
@@ -108,15 +108,14 @@ properties:
       - description: CK_SCMI_ICN_APB2 Peripheral bridge 2
       - description: CK_SCMI_ICN_APB3 Peripheral bridge 3
       - description: CK_SCMI_ICN_APB4 Peripheral bridge 4
-      - description: CK_SCMI_ICN_APBDBG Peripheral bridge for degub
+      - description: CK_SCMI_ICN_APBDBG Peripheral bridge for debug
       - description: CK_SCMI_TIMG1 Peripheral bridge for timer1
       - description: CK_SCMI_TIMG2 Peripheral bridge for timer2
       - description: CK_SCMI_PLL3 PLL3 clock
       - description: clk_dsi_txbyte DSI byte clock
 
   access-controllers:
-    minItems: 1
-    maxItems: 2
+    maxItems: 1
 
 required:
   - compatible
@@ -131,7 +130,7 @@ examples:
   - |
     #include <dt-bindings/clock/st,stm32mp25-rcc.h>
 
-    rcc: clock-controller@44200000 {
+    clock-controller@44200000 {
         compatible = "st,stm32mp25-rcc";
         reg = <0x44200000 0x10000>;
         #clock-cells = <1>;

-- 
2.25.1