From: Laura Nao <laura.nao@collabora.com>
To: mturquette@baylibre.com, sboyd@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, matthias.bgg@gmail.com,
angelogioacchino.delregno@collabora.com, p.zabel@pengutronix.de,
richardcochran@gmail.com
Cc: guangjie.song@mediatek.com, wenst@chromium.org,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, netdev@vger.kernel.org,
kernel@collabora.com, "Laura Nao" <laura.nao@collabora.com>,
"Nícolas F . R . A . Prado" <nfraprado@collabora.com>
Subject: [PATCH v5 07/27] clk: mediatek: clk-gate: Add ops for gates with HW voter
Date: Fri, 29 Aug 2025 11:18:53 +0200 [thread overview]
Message-ID: <20250829091913.131528-8-laura.nao@collabora.com> (raw)
In-Reply-To: <20250829091913.131528-1-laura.nao@collabora.com>
MT8196 use a HW voter for gate enable/disable control. Voting is
performed using set/clr regs, with a status bit used to verify the vote
state. Add new set of gate clock operations with support for voting via
set/clr regs.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
---
drivers/clk/mediatek/clk-gate.c | 73 +++++++++++++++++++++++++++++++--
drivers/clk/mediatek/clk-gate.h | 3 ++
2 files changed, 73 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/mediatek/clk-gate.c b/drivers/clk/mediatek/clk-gate.c
index 816e5f2d4079..b81791d975a4 100644
--- a/drivers/clk/mediatek/clk-gate.c
+++ b/drivers/clk/mediatek/clk-gate.c
@@ -5,6 +5,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/dev_printk.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/printk.h>
@@ -12,11 +13,13 @@
#include <linux/slab.h>
#include <linux/types.h>
+#include "clk-mtk.h"
#include "clk-gate.h"
struct mtk_clk_gate {
struct clk_hw hw;
struct regmap *regmap;
+ struct regmap *regmap_hwv;
const struct mtk_gate *gate;
};
@@ -99,6 +102,32 @@ static void mtk_cg_disable_inv(struct clk_hw *hw)
mtk_cg_clr_bit(hw);
}
+static int mtk_cg_hwv_set_en(struct clk_hw *hw, bool enable)
+{
+ struct mtk_clk_gate *cg = to_mtk_clk_gate(hw);
+ u32 val;
+
+ regmap_write(cg->regmap_hwv,
+ enable ? cg->gate->hwv_regs->set_ofs :
+ cg->gate->hwv_regs->clr_ofs,
+ BIT(cg->gate->shift));
+
+ return regmap_read_poll_timeout_atomic(cg->regmap_hwv,
+ cg->gate->hwv_regs->sta_ofs, val,
+ val & BIT(cg->gate->shift), 0,
+ MTK_WAIT_HWV_DONE_US);
+}
+
+static int mtk_cg_hwv_enable(struct clk_hw *hw)
+{
+ return mtk_cg_hwv_set_en(hw, true);
+}
+
+static void mtk_cg_hwv_disable(struct clk_hw *hw)
+{
+ mtk_cg_hwv_set_en(hw, false);
+}
+
static int mtk_cg_enable_no_setclr(struct clk_hw *hw)
{
mtk_cg_clr_bit_no_setclr(hw);
@@ -123,6 +152,15 @@ static void mtk_cg_disable_inv_no_setclr(struct clk_hw *hw)
mtk_cg_clr_bit_no_setclr(hw);
}
+static bool mtk_cg_uses_hwv(const struct clk_ops *ops)
+{
+ if (ops == &mtk_clk_gate_hwv_ops_setclr ||
+ ops == &mtk_clk_gate_hwv_ops_setclr_inv)
+ return true;
+
+ return false;
+}
+
const struct clk_ops mtk_clk_gate_ops_setclr = {
.is_enabled = mtk_cg_bit_is_cleared,
.enable = mtk_cg_enable,
@@ -137,6 +175,20 @@ const struct clk_ops mtk_clk_gate_ops_setclr_inv = {
};
EXPORT_SYMBOL_GPL(mtk_clk_gate_ops_setclr_inv);
+const struct clk_ops mtk_clk_gate_hwv_ops_setclr = {
+ .is_enabled = mtk_cg_bit_is_cleared,
+ .enable = mtk_cg_hwv_enable,
+ .disable = mtk_cg_hwv_disable,
+};
+EXPORT_SYMBOL_GPL(mtk_clk_gate_hwv_ops_setclr);
+
+const struct clk_ops mtk_clk_gate_hwv_ops_setclr_inv = {
+ .is_enabled = mtk_cg_bit_is_set,
+ .enable = mtk_cg_hwv_enable,
+ .disable = mtk_cg_hwv_disable,
+};
+EXPORT_SYMBOL_GPL(mtk_clk_gate_hwv_ops_setclr_inv);
+
const struct clk_ops mtk_clk_gate_ops_no_setclr = {
.is_enabled = mtk_cg_bit_is_cleared,
.enable = mtk_cg_enable_no_setclr,
@@ -152,8 +204,9 @@ const struct clk_ops mtk_clk_gate_ops_no_setclr_inv = {
EXPORT_SYMBOL_GPL(mtk_clk_gate_ops_no_setclr_inv);
static struct clk_hw *mtk_clk_register_gate(struct device *dev,
- const struct mtk_gate *gate,
- struct regmap *regmap)
+ const struct mtk_gate *gate,
+ struct regmap *regmap,
+ struct regmap *regmap_hwv)
{
struct mtk_clk_gate *cg;
int ret;
@@ -168,8 +221,14 @@ static struct clk_hw *mtk_clk_register_gate(struct device *dev,
init.parent_names = gate->parent_name ? &gate->parent_name : NULL;
init.num_parents = gate->parent_name ? 1 : 0;
init.ops = gate->ops;
+ if (mtk_cg_uses_hwv(init.ops) && !regmap_hwv) {
+ return dev_err_ptr_probe(
+ dev, -ENXIO,
+ "regmap not found for hardware voter clocks\n");
+ }
cg->regmap = regmap;
+ cg->regmap_hwv = regmap_hwv;
cg->gate = gate;
cg->hw.init = &init;
@@ -201,6 +260,7 @@ int mtk_clk_register_gates(struct device *dev, struct device_node *node,
int i;
struct clk_hw *hw;
struct regmap *regmap;
+ struct regmap *regmap_hwv;
if (!clk_data)
return -ENOMEM;
@@ -211,6 +271,13 @@ int mtk_clk_register_gates(struct device *dev, struct device_node *node,
return PTR_ERR(regmap);
}
+ regmap_hwv = mtk_clk_get_hwv_regmap(node);
+ if (IS_ERR(regmap_hwv)) {
+ return dev_err_probe(
+ dev, PTR_ERR(regmap_hwv),
+ "Cannot find hardware voter regmap for %pOF\n", node);
+ }
+
for (i = 0; i < num; i++) {
const struct mtk_gate *gate = &clks[i];
@@ -220,7 +287,7 @@ int mtk_clk_register_gates(struct device *dev, struct device_node *node,
continue;
}
- hw = mtk_clk_register_gate(dev, gate, regmap);
+ hw = mtk_clk_register_gate(dev, gate, regmap, regmap_hwv);
if (IS_ERR(hw)) {
pr_err("Failed to register clk %s: %pe\n", gate->name,
diff --git a/drivers/clk/mediatek/clk-gate.h b/drivers/clk/mediatek/clk-gate.h
index 1a46b4c56fc5..4f05b9855dae 100644
--- a/drivers/clk/mediatek/clk-gate.h
+++ b/drivers/clk/mediatek/clk-gate.h
@@ -19,6 +19,8 @@ extern const struct clk_ops mtk_clk_gate_ops_setclr;
extern const struct clk_ops mtk_clk_gate_ops_setclr_inv;
extern const struct clk_ops mtk_clk_gate_ops_no_setclr;
extern const struct clk_ops mtk_clk_gate_ops_no_setclr_inv;
+extern const struct clk_ops mtk_clk_gate_hwv_ops_setclr;
+extern const struct clk_ops mtk_clk_gate_hwv_ops_setclr_inv;
struct mtk_gate_regs {
u32 sta_ofs;
@@ -31,6 +33,7 @@ struct mtk_gate {
const char *name;
const char *parent_name;
const struct mtk_gate_regs *regs;
+ const struct mtk_gate_regs *hwv_regs;
int shift;
const struct clk_ops *ops;
unsigned long flags;
--
2.39.5
next prev parent reply other threads:[~2025-08-29 9:21 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-29 9:18 [PATCH v5 00/27] Add support for MT8196 clock controllers Laura Nao
2025-08-29 9:18 ` [PATCH v5 01/27] clk: mediatek: clk-pll: Add set/clr regs for shared PLL enable control Laura Nao
2025-08-29 9:18 ` [PATCH v5 02/27] clk: mediatek: clk-pll: Add ops for PLLs using set/clr regs and FENC Laura Nao
2025-08-29 9:18 ` [PATCH v5 03/27] clk: mediatek: clk-mux: Add ops for mux gates with set/clr/upd " Laura Nao
2025-08-29 9:18 ` [PATCH v5 04/27] clk: mediatek: clk-mtk: Introduce mtk_clk_get_hwv_regmap() Laura Nao
2025-08-29 9:18 ` [PATCH v5 05/27] clk: mediatek: clk-mux: Add ops for mux gates with HW voter and FENC Laura Nao
2025-08-29 9:18 ` [PATCH v5 06/27] clk: mediatek: clk-gate: Refactor mtk_clk_register_gate to use mtk_gate struct Laura Nao
2025-08-29 9:18 ` Laura Nao [this message]
2025-08-29 9:18 ` [PATCH v5 08/27] clk: mediatek: clk-mtk: Add MUX_DIV_GATE macro Laura Nao
2025-08-29 9:18 ` [PATCH v5 09/27] dt-bindings: clock: mediatek: Describe MT8196 clock controllers Laura Nao
2025-08-29 9:18 ` [PATCH v5 10/27] clk: mediatek: Add MT8196 apmixedsys clock support Laura Nao
2025-08-29 9:18 ` [PATCH v5 11/27] clk: mediatek: Add MT8196 topckgen " Laura Nao
2025-08-29 9:18 ` [PATCH v5 12/27] clk: mediatek: Add MT8196 topckgen2 " Laura Nao
2025-08-29 9:18 ` [PATCH v5 13/27] clk: mediatek: Add MT8196 vlpckgen " Laura Nao
2025-08-29 9:19 ` [PATCH v5 14/27] clk: mediatek: Add MT8196 peripheral " Laura Nao
2025-08-29 9:19 ` [PATCH v5 15/27] clk: mediatek: Add MT8196 ufssys " Laura Nao
2025-08-29 9:19 ` [PATCH v5 16/27] clk: mediatek: Add MT8196 pextpsys " Laura Nao
2025-08-29 9:19 ` [PATCH v5 17/27] clk: mediatek: Add MT8196 I2C " Laura Nao
2025-08-29 9:19 ` [PATCH v5 18/27] clk: mediatek: Add MT8196 mcu " Laura Nao
2025-08-29 9:19 ` [PATCH v5 19/27] clk: mediatek: Add MT8196 mdpsys " Laura Nao
2025-08-29 9:19 ` [PATCH v5 20/27] clk: mediatek: Add MT8196 mfg " Laura Nao
2025-08-29 9:19 ` [PATCH v5 21/27] clk: mediatek: Add MT8196 disp0 " Laura Nao
2025-08-29 9:19 ` [PATCH v5 22/27] clk: mediatek: Add MT8196 disp1 " Laura Nao
2025-08-29 9:19 ` [PATCH v5 23/27] clk: mediatek: Add MT8196 disp-ao " Laura Nao
2025-08-29 9:19 ` [PATCH v5 24/27] clk: mediatek: Add MT8196 ovl0 " Laura Nao
2025-08-29 9:19 ` [PATCH v5 25/27] clk: mediatek: Add MT8196 ovl1 " Laura Nao
2025-08-29 9:19 ` [PATCH v5 26/27] clk: mediatek: Add MT8196 vdecsys " Laura Nao
2025-08-29 9:19 ` [PATCH v5 27/27] clk: mediatek: Add MT8196 vencsys " Laura Nao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250829091913.131528-8-laura.nao@collabora.com \
--to=laura.nao@collabora.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=guangjie.song@mediatek.com \
--cc=kernel@collabora.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mturquette@baylibre.com \
--cc=netdev@vger.kernel.org \
--cc=nfraprado@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=wenst@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).